Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef AirTerminalUnit_hh_INCLUDED
49 : #define AirTerminalUnit_hh_INCLUDED
50 :
51 : // C++ Headers
52 : #include <string>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/EnergyPlus.hh>
57 :
58 : namespace EnergyPlus {
59 :
60 : // Forward declarations
61 : struct EnergyPlusData;
62 :
63 : // types of air terminal units, refactored from old DataDefineEquip
64 : enum AirTerminalUnitType
65 : {
66 : notYetDetermined,
67 : dualDuctConstVolume,
68 : dualDuctVAV,
69 : singleDuctVAVReheat,
70 : singleDuctConstVolReheat,
71 : singleDuctConstVolNoReheat,
72 : singleDuctVAVNoReheat,
73 : singleDuct_SeriesPIU_Reheat,
74 : singleDuct_ParallelPIU_Reheat,
75 : singleDuct_ConstVol_4PipeInduc,
76 : singleDuctVAVReheatVSFan,
77 : singleDuctCBVAVReheat,
78 : singleDuctCBVAVNoReheat,
79 : singleDuctConstVolCooledBeam,
80 : dualDuctVAVOutdoorAir,
81 : singleDuctUserDefined,
82 : singleDuctATMixer,
83 : singleDuctConstVolFourPipeBeam
84 : };
85 :
86 : // base class for all air distribution units. zone air terminals for connecting to central air handlers
87 30 : class AirTerminalUnit
88 : {
89 :
90 : public: // Methods
91 : virtual void simulate(EnergyPlusData &state,
92 : bool FirstHVACIteration, // TRUE if first HVAC iteration in time step
93 : Real64 &NonAirSysOutput // convective cooling by the beam system [W]
94 : ) = 0;
95 :
96 : virtual int getZoneIndex() = 0;
97 :
98 : virtual int getAirLoopNum() = 0;
99 :
100 : virtual Real64 getPrimAirDesignVolFlow() = 0;
101 :
102 : virtual int getTermUnitSizingIndex() = 0;
103 :
104 : protected: // Data
105 : AirTerminalUnitType terminalType = notYetDetermined; // Type of air distribution unit //Legacy For use during transition to OO
106 : std::string name; // name of unit
107 : std::string unitType; // type of unit = e.g. AirTerminal:SingleDuct:ConstantVolume:FourPipeBeam
108 : int aDUNum = 0; // index of this unit in the corresponding air distribution unit structure
109 : int airAvailSchedNum = 0; // index to schedule for pimary air availability
110 : bool airAvailable = false; // true if primary air is available
111 : Real64 vDotDesignPrimAir = 0.0; // Design primary air volume flow rate m3/s (autosizable)
112 : bool vDotDesignPrimAirWasAutosized = false; // true if user input for design air flow was autsized on input
113 : Real64 mDotDesignPrimAir = 0.0; // Design primary air mass flow rate kg/s
114 : int airInNodeNum = 0; // unit air inlet system node number, air enters into air terminal unit
115 : int airOutNodeNum = 0; // unit air outlet system node number, air enters into zone from air terminal
116 : int zoneIndex = 0; // zone index for this air terminal unit
117 : int zoneNodeIndex = 0; // index in node structure for the zone node for this air terminal
118 : int ctrlZoneInNodeIndex = 0; // which controlled zone inlet node number corresponds with this unit
119 : int airLoopNum = 0; // index to airloop that this terminal unit is connected to
120 : int termUnitSizingNum = 0; // index to TermUnitSizing, TermUnitFinalZoneSizing, and more for this air distribution unit
121 : }; // AirTerminalUnit
122 :
123 : } // namespace EnergyPlus
124 :
125 : #endif // AirTerminalUnit_hh_INCLUDED
|