Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef BaseSizerWithScalableInputs_hh_INCLUDED
49 : #define BaseSizerWithScalableInputs_hh_INCLUDED
50 :
51 : #include <EnergyPlus/Autosizing/BaseSizerWithFanHeatInputs.hh>
52 : #include <EnergyPlus/Autosizing/BaseSizerWithScalableInputs.hh>
53 : #include <EnergyPlus/Data/BaseData.hh>
54 : #include <EnergyPlus/api/TypeDefs.h>
55 : #include <string>
56 :
57 : namespace EnergyPlus {
58 :
59 : struct EnergyPlusData;
60 :
61 37392 : struct BaseSizerWithScalableInputs : BaseSizerWithFanHeatInputs
62 : {
63 :
64 : bool zoneCoolingOnlyFan = false;
65 : bool zoneHeatingOnlyFan = false;
66 : bool dataHRFlowSizingFlag = false;
67 : Real64 dataFracOfAutosizedCoolingAirflow = 0.0;
68 : Real64 dataFracOfAutosizedHeatingAirflow = 0.0;
69 : Real64 dataFlowPerCoolingCapacity = 0.0;
70 : Real64 dataAutosizedCoolingCapacity = 0.0;
71 : Real64 dataFlowPerHeatingCapacity = 0.0;
72 : Real64 dataAutosizedHeatingCapacity = 0.0;
73 :
74 : // capacity sizing
75 : Real64 dataCoilSizingAirInTemp = 0.0;
76 : Real64 dataCoilSizingAirInHumRat = 0.0;
77 : Real64 dataCoilSizingAirOutTemp = 0.0;
78 : Real64 dataCoilSizingAirOutHumRat = 0.0;
79 : Real64 dataCoilSizingFanCoolLoad = 0.0;
80 : Real64 dataCoilSizingCapFT = 0.0;
81 : Real64 dataTotCapCurveValue = 0.0;
82 : Real64 dataFracOfAutosizedCoolingCapacity = 0.0;
83 : Real64 dataFracOfAutosizedHeatingCapacity = 0.0;
84 : Real64 dataCoolCoilCap = 0.0;
85 : bool dataCoilIsSuppHeater = false;
86 : Real64 suppHeatCap = 0.0;
87 : Real64 unitaryHeatCap = 0.0;
88 : int dataTotCapCurveIndex = 0;
89 : int dataCoolCoilType = -1;
90 : int dataCoolCoilIndex = -1;
91 :
92 : int zoneHVACSizingIndex = 0;
93 : EPVector<DataSizing::ZoneHVACSizingData> zoneHVACSizing;
94 :
95 : void initializeWithinEP(EnergyPlusData &state,
96 : std::string_view const _compType,
97 : std::string_view const _compName,
98 : bool _printWarningFlag,
99 : std::string_view const _callingRoutine) override;
100 :
101 0 : void clearState()
102 : {
103 0 : BaseSizerWithFanHeatInputs::clearState();
104 0 : zoneCoolingOnlyFan = false;
105 0 : zoneHeatingOnlyFan = false;
106 0 : dataHRFlowSizingFlag = false;
107 0 : dataFracOfAutosizedCoolingAirflow = 0.0;
108 0 : dataFracOfAutosizedHeatingAirflow = 0.0;
109 0 : dataFlowPerCoolingCapacity = 0.0;
110 0 : dataAutosizedCoolingCapacity = 0.0;
111 0 : dataFlowPerHeatingCapacity = 0.0;
112 0 : dataAutosizedHeatingCapacity = 0.0;
113 0 : dataCoilSizingAirInTemp = 0.0;
114 0 : dataCoilSizingAirInHumRat = 0.0;
115 0 : dataCoilSizingAirOutTemp = 0.0;
116 0 : dataCoilSizingAirOutHumRat = 0.0;
117 0 : dataCoilSizingFanCoolLoad = 0.0;
118 0 : dataCoilSizingCapFT = 0.0;
119 0 : dataTotCapCurveIndex = 0.0;
120 0 : dataTotCapCurveValue = 0.0;
121 0 : dataFracOfAutosizedCoolingCapacity = 0.0;
122 0 : dataFracOfAutosizedHeatingCapacity = 0.0;
123 0 : dataCoolCoilCap = 0.0;
124 0 : dataCoilIsSuppHeater = false;
125 0 : suppHeatCap = 0.0;
126 0 : unitaryHeatCap = 0.0;
127 0 : zoneHVACSizingIndex = 0;
128 0 : dataCoolCoilType = -1;
129 0 : dataCoolCoilIndex = -1;
130 0 : zoneHVACSizing.clear();
131 0 : }
132 :
133 : void setHVACSizingIndexData(int const index);
134 : };
135 :
136 771 : struct BaseSizerWithScalableInputsData : BaseGlobalStruct
137 : {
138 :
139 0 : void clear_state() override
140 : {
141 0 : }
142 : };
143 :
144 : } // namespace EnergyPlus
145 :
146 : #endif
|