Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef ChillerElectricASHRAE205_hh_INCLUDED
49 : #define ChillerElectricASHRAE205_hh_INCLUDED
50 :
51 : #include <ObjexxFCL/Array1D.hh>
52 :
53 : #include "EnergyPlus/ChillerElectricEIR.hh"
54 : #include "rs0001.h"
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : struct EnergyPlusData;
62 :
63 : namespace ChillerElectricASHRAE205 {
64 :
65 : enum class AmbientTempIndicator
66 : {
67 : Invalid = -1,
68 : Schedule, // ambient temperature around tank (or HPWH inlet air) is scheduled
69 : TempZone, // tank is located in a zone or HPWH inlet air is zone air only
70 : OutsideAir, // tank is located outdoors or HPWH inlet air is outdoor air only
71 : ZoneAndOA, // applicable to HPWH only, inlet air is mixture of OA and zone air
72 : Num,
73 : };
74 :
75 : void tk205ErrCallback(tk205::MsgSeverity message_type, const std::string &message, void *context_ptr);
76 :
77 : void getChillerASHRAE205Input(EnergyPlusData &state);
78 :
79 13 : struct ASHRAE205ChillerSpecs : ChillerElectricEIR::ElectricEIRChillerSpecs
80 : {
81 : static constexpr std::string_view ObjectType{"Chiller:Electric:ASHRAE205"};
82 : std::shared_ptr<tk205::rs0001_ns::RS0001> Representation; // ASHRAE205 representation instance
83 : Btwxt::Method InterpolationType{Btwxt::Method::LINEAR};
84 : int MinSequenceNumber{1};
85 : int MaxSequenceNumber{1};
86 :
87 : int OilCoolerInletNode{0};
88 : int OilCoolerOutletNode{0};
89 : Real64 OilCoolerVolFlowRate{0};
90 : Real64 OilCoolerMassFlowRate{0};
91 : PlantLocation OCPlantLoc{0, DataPlant::LoopSideLocation::Invalid, 0, 0};
92 : int AuxiliaryHeatInletNode{0};
93 : int AuxiliaryHeatOutletNode{0};
94 : Real64 AuxiliaryVolFlowRate{0};
95 : Real64 AuxiliaryMassFlowRate{0};
96 : PlantLocation AHPlantLoc{0, DataPlant::LoopSideLocation::Invalid, 0, 0};
97 : Real64 QOilCooler{0};
98 : Real64 QAuxiliary{0};
99 : Real64 OilCoolerEnergy{0};
100 : Real64 AuxiliaryEnergy{0};
101 :
102 : AmbientTempIndicator AmbientTempType{AmbientTempIndicator::Invalid};
103 : int AmbientTempSchedule{0}; // Schedule index pointer
104 : int AmbientTempZone{0}; // Number of ambient zone around tank
105 : int AmbientTempOutsideAirNode{0}; // Number of outside air node
106 : Real64 AmbientTemp{0};
107 : Real64 AmbientZoneGain{0}; // Internal gain to zone from losses (W)
108 : Real64 AmbientZoneGainEnergy{0}; // Internal gain to zone from losses (J)
109 : std::string EndUseSubcategory{""}; // identifier use for the end use subcategory
110 :
111 : // Default Constructor
112 3 : ASHRAE205ChillerSpecs() = default;
113 :
114 : void setOutputVariables(EnergyPlusData &state);
115 :
116 : static ASHRAE205ChillerSpecs *factory(EnergyPlusData &state, std::string const &chillerName);
117 :
118 : void simulate([[maybe_unused]] EnergyPlusData &state,
119 : const PlantLocation &calledFromLocation,
120 : bool FirstHVACIteration,
121 : Real64 &CurLoad,
122 : bool RunFlag) override;
123 :
124 : void getDesignCapacities(
125 : EnergyPlusData &state, const PlantLocation &calledFromLocation, Real64 &MaxLoad, Real64 &MinLoad, Real64 &OptLoad) override;
126 :
127 : void initialize(EnergyPlusData &state, bool RunFlag, Real64 MyLoad) override;
128 :
129 : void size(EnergyPlusData &state) override;
130 :
131 : void findEvaporatorMassFlowRate(EnergyPlusData &state, Real64 &load, Real64 Cp);
132 :
133 : void calculate(EnergyPlusData &state,
134 : Real64 &MyLoad, // operating load
135 : bool RunFlag // TRUE when chiller operating
136 : ) override;
137 :
138 : void update(EnergyPlusData &state,
139 : Real64 MyLoad, // current load
140 : bool RunFlag // TRUE if chiller operating
141 : ) override;
142 :
143 : void oneTimeInit_new(EnergyPlusData &state) override;
144 : };
145 :
146 : } // namespace ChillerElectricASHRAE205
147 :
148 1542 : struct ChillerElectricASHRAE205Data : BaseGlobalStruct
149 : {
150 : bool getInputFlag = true;
151 : Array1D<ChillerElectricASHRAE205::ASHRAE205ChillerSpecs> Electric205Chiller;
152 :
153 0 : void clear_state() override
154 : {
155 0 : *this = ChillerElectricASHRAE205Data();
156 0 : }
157 : };
158 :
159 : } // namespace EnergyPlus
160 : #endif // ChillerElectricASHRAE205_hh_INCLUDED
|