Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef CoolTower_hh_INCLUDED
49 : #define CoolTower_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : // Forward declarations
62 : struct EnergyPlusData;
63 :
64 : namespace CoolTower {
65 :
66 : enum class FlowCtrl
67 : {
68 : Invalid = -1,
69 : FlowSchedule,
70 : WindDriven,
71 : Num
72 : };
73 :
74 : enum class WaterSupplyMode
75 : {
76 : Invalid = -1,
77 : FromMains,
78 : FromTank,
79 : Num
80 : };
81 :
82 1488 : struct CoolTowerParams
83 : {
84 : // Members
85 : std::string Name; // The component name
86 : std::string CompType; // Type of component
87 : std::string Schedule; // Available schedule
88 : std::string ZoneName; // Name of zone the component is serving
89 : int SchedPtr = 0; // Index to schedule
90 : int ZonePtr = 0; // Point to this zone
91 : int PumpSchedPtr = 0; // Index to schedule for water pump
92 : FlowCtrl FlowCtrlType = FlowCtrl::Invalid; // Type of cooltower operation
93 : WaterSupplyMode CoolTWaterSupplyMode = WaterSupplyMode::FromMains; // Type of water source
94 : std::string CoolTWaterSupplyName; // Name of water source
95 : int CoolTWaterSupTankID; // Index to water storage tank
96 : int CoolTWaterTankDemandARRID; // Index to water storage demand
97 : Real64 TowerHeight = 0.0; // Effective cooltower height in m
98 : Real64 OutletArea = 0.0; // Outlet area where conditioned air comes in m2
99 : Real64 OutletVelocity = 0.0; // Outlet velocity of the cooltower in m/s
100 : Real64 MaxAirVolFlowRate = 0.0; // Maximum allowable airflow in m3/s
101 : Real64 AirMassFlowRate = 0.0; // Air mass flow rate in kg/s
102 : Real64 CoolTAirMass = 0.0; // Air mass in kg
103 : Real64 MinZoneTemp = 0.0; // Lower temperature limit to prevent over cooling in C
104 : Real64 FracWaterLoss = 0.0; // Fraction of estimated blowdown and drift water
105 : Real64 FracFlowSched = 0.0; // Fraction of airflow loss
106 : Real64 MaxWaterFlowRate = 0.0; // Maximum limit of water flow rate in m3/s
107 : Real64 ActualWaterFlowRate = 0.0; // Actual water mass flow rate in m3/s
108 : Real64 RatedPumpPower = 0.0; // Rated power consumption for water pump serving the cooltower in watts
109 : Real64 SenHeatLoss = 0.0; // Sensible heat loss in Joules
110 : Real64 SenHeatPower = 0.0; // Sensible heat loss rate in watts
111 : Real64 LatHeatLoss = 0.0; // Latent heat loss in Joules
112 : Real64 LatHeatPower = 0.0; // Latent heat loss rate in watts
113 : Real64 AirVolFlowRate = 0.0; // Air flow rate in m3/s
114 : Real64 AirVolFlowRateStd = 0.0; // Air flow rate in m3/s at standard conditions
115 : Real64 CoolTAirVol = 0.0; // Air volume in m3
116 : Real64 ActualAirVolFlowRate = 0.0; // Actual air flow rate in m3/s
117 : Real64 InletDBTemp = 0.0; // Outdoor dry bulb temperature in C
118 : Real64 InletWBTemp = 0.0; // Outdoor wet bulb temperature in C
119 : Real64 InletHumRat = 0.0; // Outdoor humidity ratio
120 : Real64 OutletTemp = 0.0; // Dry bulb temperature at cooltower exit in C
121 : Real64 OutletHumRat = 0.0; // Humidity ratio at cooltower exit
122 : Real64 CoolTWaterConsumpRate = 0.0; // Total water consumption during the processes in m3/s
123 : Real64 CoolTWaterStarvMakeupRate = 0.0; // Water provided from the mains (m3/s)
124 : Real64 CoolTWaterStarvMakeup = 0.0; // Water provided from the mains
125 : Real64 CoolTWaterConsump = 0.0; // Total water consumption in m3
126 : Real64 PumpElecPower = 0.0; // Pump power in watts
127 : Real64 PumpElecConsump = 0.0; // Pump energy consumption in Joules
128 : };
129 :
130 : void ManageCoolTower(EnergyPlusData &state);
131 :
132 : void GetCoolTower(EnergyPlusData &state);
133 :
134 : void CalcCoolTower(EnergyPlusData &state);
135 :
136 : void UpdateCoolTower(EnergyPlusData &state);
137 :
138 : void ReportCoolTower(EnergyPlusData &state);
139 :
140 : } // namespace CoolTower
141 :
142 1542 : struct CoolTowerData : BaseGlobalStruct
143 : {
144 :
145 : bool GetInputFlag = true;
146 : Array1D<CoolTower::CoolTowerParams> CoolTowerSys;
147 :
148 0 : void clear_state() override
149 : {
150 0 : *this = CoolTowerData();
151 0 : }
152 : };
153 :
154 : } // namespace EnergyPlus
155 :
156 : #endif
|
