Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef CostEstimateManager_hh_INCLUDED
49 : #define CostEstimateManager_hh_INCLUDED
50 :
51 : // EnergyPlus Headers
52 : #include <EnergyPlus/Data/BaseData.hh>
53 : #include <EnergyPlus/EnergyPlus.hh>
54 :
55 : namespace EnergyPlus {
56 :
57 : // Forward declarations
58 : struct EnergyPlusData;
59 :
60 : namespace CostEstimateManager {
61 :
62 : enum class ParentObject
63 : {
64 : Invalid = -1,
65 : General,
66 : Construction,
67 : CoilDX,
68 : CoilCoolingDX,
69 : CoilCoolingDXSingleSpeed,
70 : CoilHeatingFuel,
71 : ChillerElectric,
72 : DaylightingControls,
73 : ShadingZoneDetailed,
74 : Lights,
75 : GeneratorPhotovoltaic,
76 : Num
77 : };
78 :
79 4712 : struct CostLineItemStruct
80 : {
81 : // Members
82 : std::string LineName; // object name (needed ?)
83 : ParentObject ParentObjType; // parent reference to IDD object type
84 : std::string ParentObjName; // parent instance in IDF
85 : int ParentObjIDinList = 1;
86 : Real64 PerSquareMeter = 0.0; // cost per square meter
87 : Real64 PerEach = 0.0; // cost per each
88 : Real64 PerKiloWattCap = 0.0; // cost per kW of nominal capacity
89 : Real64 PerKWCapPerCOP = 0.0; // cost per kW of nominal capacity per COP
90 : Real64 PerCubicMeter = 0.0; // cost per cubic meter
91 : Real64 PerCubMeterPerSec = 0.0; // cost per cubic meter per second
92 : Real64 PerUAinWattperDelK = 0.0; // cost per (UA) in Watt/deltaK
93 : int LineNumber = -1; // number of line item in detail list
94 : Real64 Qty = 0.0; // quantity in calculations (can be input)
95 : std::string Units; // Reported units
96 : Real64 ValuePer = 0.0; // Cost used in final calculation
97 : Real64 LineSubTotal = 0.0; // line item total Qty * ValuePer
98 : };
99 :
100 : struct CostAdjustmentStruct
101 : {
102 : // Members
103 : Real64 LineItemTot; // = 0.0 ! holds total from line item cost calculations
104 : Real64 MiscCostperSqMeter; // = 0.0 ! holds user-defined constant cost model
105 : Real64 DesignFeeFrac; // = 0.0 ! holds user-defined fraction for design fees
106 : Real64 ContractorFeeFrac; // = 0.0 ! holds user-defined fraction for contractor fees
107 : Real64 ContingencyFrac; // = 0.0 ! holds user-defined fraction for contingencies
108 : Real64 BondCostFrac; // = 0.0 ! holds user-defined fraction for bonding costs
109 : Real64 CommissioningFrac; // = 0.0 ! holds user-defined fraction for commissioning costs
110 : Real64 RegionalModifier; // = 1.0 ! holds user-defined multiplier to account for regional diffs
111 : Real64 GrandTotal; // = 0.0 ! the Grand Total of all line items plus all other costs
112 :
113 : // Default Constructor
114 : CostAdjustmentStruct()
115 : : LineItemTot(0.0), MiscCostperSqMeter(0.0), DesignFeeFrac(0.0), ContractorFeeFrac(0.0), ContingencyFrac(0.0), BondCostFrac(0.0),
116 : CommissioningFrac(0.0), RegionalModifier(0.0), GrandTotal(0.0)
117 : {
118 : }
119 :
120 : // Member Constructor
121 1542 : CostAdjustmentStruct(Real64 const LineItemTot, // = 0.0 ! holds total from line item cost calculations
122 : Real64 const MiscCostperSqMeter, // = 0.0 ! holds user-defined constant cost model
123 : Real64 const DesignFeeFrac, // = 0.0 ! holds user-defined fraction for design fees
124 : Real64 const ContractorFeeFrac, // = 0.0 ! holds user-defined fraction for contractor fees
125 : Real64 const ContingencyFrac, // = 0.0 ! holds user-defined fraction for contingencies
126 : Real64 const BondCostFrac, // = 0.0 ! holds user-defined fraction for bonding costs
127 : Real64 const CommissioningFrac, // = 0.0 ! holds user-defined fraction for commissioning costs
128 : Real64 const RegionalModifier, // = 1.0 ! holds user-defined multiplier to account for regional diffs
129 : Real64 const GrandTotal // = 0.0 ! the Grand Total of all line items plus all other costs
130 : )
131 1542 : : LineItemTot(LineItemTot), MiscCostperSqMeter(MiscCostperSqMeter), DesignFeeFrac(DesignFeeFrac), ContractorFeeFrac(ContractorFeeFrac),
132 : ContingencyFrac(ContingencyFrac), BondCostFrac(BondCostFrac), CommissioningFrac(CommissioningFrac), RegionalModifier(RegionalModifier),
133 1542 : GrandTotal(GrandTotal)
134 : {
135 1542 : }
136 : };
137 :
138 171487 : struct monetaryUnitType
139 : {
140 : // Members
141 : std::string code; // ISO code for currency such as USD or EUR
142 : std::string txt; // text representation of the currency
143 : std::string html; // representation for HTML file - contains unicode references
144 :
145 : // Default Constructor
146 769 : monetaryUnitType() : code(std::string()), txt(std::string()), html(std::string())
147 : {
148 769 : }
149 : };
150 :
151 : void SimCostEstimate(EnergyPlusData &state);
152 :
153 : void GetCostEstimateInput(EnergyPlusData &state);
154 :
155 : void CheckCostEstimateInput(EnergyPlusData &state, bool &ErrorsFound); // Set to true if errors in input, fatal at end of routine
156 :
157 : void CalcCostEstimate(EnergyPlusData &state);
158 :
159 : } // namespace CostEstimateManager
160 :
161 1542 : struct CostEstimateManagerData : BaseGlobalStruct
162 : {
163 :
164 : bool GetCostInput = true;
165 : bool DoCostEstimate = false; // set to true if any cost estimating needed
166 : int selectedMonetaryUnit = 0;
167 :
168 : Array1D<CostEstimateManager::CostLineItemStruct> CostLineItem;
169 :
170 : CostEstimateManager::CostAdjustmentStruct CurntBldg = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0};
171 : // holds total from line item cost calculations | holds user-defined
172 : // constant cost model | holds user-defined fraction for design fees
173 : // | holds user-defined fraction for contractor fees | holds
174 : // user-defined fraction for contingencies | holds user-defined
175 : // fraction for bonding costs | holds user-defined fraction for
176 : // commissioning costs | holds user-defined multiplier to account for
177 : // regional diffs | the Grand Total of all line items plus all other
178 : // costs
179 :
180 : CostEstimateManager::CostAdjustmentStruct RefrncBldg{0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0};
181 : // holds total from line item cost calculations | holds user-defined
182 : // constant cost model | holds user-defined fraction for design fees
183 : // | holds user-defined fraction for contractor fees | holds
184 : // user-defined fraction for contingencies | holds user-defined
185 : // fraction for bonding costs | holds user-defined fraction for
186 : // commissioning costs | holds user-defined multiplier to account
187 : // for regional diffs | the Grand Total of all line items plus all
188 : // other costs
189 :
190 : Array1D<CostEstimateManager::monetaryUnitType> monetaryUnit;
191 :
192 0 : void clear_state() override
193 : {
194 0 : *this = CostEstimateManagerData();
195 0 : }
196 : };
197 :
198 : } // namespace EnergyPlus
199 :
200 : #endif
|
