Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef DXFEarClipping_hh_INCLUDED
49 : #define DXFEarClipping_hh_INCLUDED
50 :
51 : // EnergyPlus Headers
52 : #include <EnergyPlus/Data/BaseData.hh>
53 : #include <EnergyPlus/DataSurfaces.hh>
54 : #include <EnergyPlus/DataVectorTypes.hh>
55 : #include <EnergyPlus/EnergyPlus.hh>
56 :
57 : namespace EnergyPlus {
58 :
59 : // Forward declarations
60 : struct EnergyPlusData;
61 :
62 : namespace DXFEarClipping {
63 :
64 : // Using/Aliasing
65 : using DataVectorTypes::dTriangle;
66 : using DataVectorTypes::Vector;
67 : using DataVectorTypes::Vector_2d;
68 :
69 : // Data
70 :
71 : // Derived type definitions:
72 : // na
73 :
74 : // Module variable declarations:
75 : // na
76 : // Subroutine specifications for module <module_name>:
77 :
78 : // Functions
79 :
80 : bool InPolygon(Vector const &point, Array1D<Vector> &poly, int const nsides);
81 :
82 : Real64 Modulus(Vector const &point);
83 :
84 : int Triangulate(EnergyPlusData &state,
85 : int const nsides, // number of sides to polygon
86 : Array1D<Vector> &polygon,
87 : Array1D<dTriangle> &outtriangles,
88 : Real64 const surfazimuth, // surface azimuth angle (outward facing normal)
89 : Real64 const surftilt, // surface tilt angle
90 : std::string const &surfname, // surface name (for error messages)
91 : DataSurfaces::SurfaceClass surfclass // surface class
92 : );
93 :
94 : Real64 angle_2dvector(Real64 const xa, // vertex coordinate
95 : Real64 const ya, // vertex coordinate
96 : Real64 const xb, // vertex coordinate
97 : Real64 const yb, // vertex coordinate
98 : Real64 const xc, // vertex coordinate
99 : Real64 const yc // vertex coordinate
100 : );
101 :
102 : bool polygon_contains_point_2d(int const nsides, // number of sides (vertices)
103 : Array1D<Vector_2d> &polygon, // points of polygon
104 : Vector_2d const &point // point to be tested
105 : );
106 :
107 : void generate_ears(EnergyPlusData &state,
108 : int const nvert, // number of vertices in polygon
109 : Array1D<Vector_2d> &vertex,
110 : Array1D_int &ears, // number of ears possible (dimensioned to nvert)
111 : int &nears, // number of ears found
112 : Array1D_int &r_vertices, // number of reflex vertices (>180) possible
113 : int &nrverts, // number of reflex vertices found (>=180)
114 : Array1D_int &c_vertices, // number of convex vertices
115 : int &ncverts, // number of convex vertices found (< 180)
116 : Array1D_bool &removed, // array that shows if a vertex has been removed (calling routine)
117 : Array1D_int &earvert, // vertex indicators for first ear
118 : Array1D<Real64> &rangles);
119 :
120 : void CalcWallCoordinateTransformation(int const nsides,
121 : Array1D<Vector> &polygon,
122 : Real64 const surfazimuth,
123 : Real64 const surftilt, // unused1208
124 : Array1D<Real64> &xvt,
125 : Array1D<Real64> &yvt,
126 : Array1D<Real64> &zvt);
127 :
128 : void CalcRfFlrCoordinateTransformation(int const nsides,
129 : Array1D<Vector> &polygon,
130 : Real64 const surfazimuth, // unused1208
131 : Real64 const surftilt,
132 : Array1D<Real64> &xvt,
133 : Array1D<Real64> &yvt,
134 : Array1D<Real64> &zvt);
135 :
136 : void reorder(int &nvert); // unused1208
137 :
138 : } // namespace DXFEarClipping
139 :
140 771 : struct DXFEarClippingData : BaseGlobalStruct
141 : {
142 :
143 : bool trackit = false;
144 : int errcount = 0;
145 :
146 0 : void clear_state() override
147 : {
148 0 : this->trackit = false;
149 0 : this->errcount = 0;
150 0 : }
151 : };
152 :
153 : } // namespace EnergyPlus
154 :
155 : #endif
|