Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef DataBranchAirLoopPlant_hh_INCLUDED
49 : #define DataBranchAirLoopPlant_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : namespace DataBranchAirLoopPlant {
62 :
63 : // Parameters for tolerance
64 : constexpr Real64 MassFlowTolerance(0.000000001); // minimum significant mass flow rate (kg/s)
65 :
66 : // Pressure Curve Type: None, pressure, or generic curve (if generic it will be a positive value which is the curve manager index)
67 : enum class PressureCurveType
68 : {
69 : Invalid = -1,
70 : None,
71 : Pressure,
72 : Generic,
73 : Num
74 : };
75 :
76 : // Parameters for flow Control Types for branch flow resolution inside splitter/mixers
77 : enum class ControlType
78 : {
79 : Invalid = -1,
80 : Active,
81 : Passive,
82 : SeriesActive,
83 : Bypass,
84 : Num
85 : };
86 :
87 : // Types
88 :
89 1282 : struct PlantPressureCurveData
90 : {
91 : // Members
92 : std::string Name;
93 : Real64 EquivDiameter = 0.0; // - An effective diameter for calculation of Re & e/D [m]
94 : Real64 MinorLossCoeff = 0.0; // - K factor [-]
95 : Real64 EquivLength = 0.0; // - An effective length to apply friction calculation [m]
96 : Real64 EquivRoughness = 0.0; // - An effective roughness (e) to calculate e/D [m]
97 : bool ConstantFPresent = false; // - Signal for if a constant value of f was entered
98 : Real64 ConstantF = 0.0; // - Constant value of f (if applicable) [-]
99 : bool EMSOverrideOn = false; // if TRUE, then EMS is calling to override curve value
100 : Real64 EMSOverrideCurveValue = 0.0; // Value of curve result EMS is directing to use
101 :
102 : // report variables.
103 : Real64 CurveOutput = 0.0;
104 : Real64 CurveInput1 = 0.0; // - MassFlow [kg/s]
105 : Real64 CurveInput2 = 0.0; // - Density [kg/m3]
106 : Real64 CurveInput3 = 0.0; // - Velocity [m/s]
107 : };
108 : } // namespace DataBranchAirLoopPlant
109 :
110 1542 : struct DataBranchAirLoopPlantData : BaseGlobalStruct
111 : {
112 : Array1D<DataBranchAirLoopPlant::PlantPressureCurveData> PressureCurve;
113 :
114 0 : void clear_state() override
115 : {
116 0 : *this = DataBranchAirLoopPlantData();
117 0 : }
118 : };
119 :
120 : } // namespace EnergyPlus
121 :
122 : #endif
|
