Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef DataDaylightingDevices_hh_INCLUDED
49 : #define DataDaylightingDevices_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : namespace DataDaylightingDevices {
62 :
63 : constexpr int MaxTZones(10); // Maximum number of transition zones
64 : constexpr int NumOfAngles(19); // Number of data points on transmittance vs. angle curve
65 :
66 : enum class RadType
67 : {
68 : Invalid = -1,
69 : VisibleBeam,
70 : SolarBeam,
71 : SolarAniso,
72 : SolarIso,
73 : Num
74 : };
75 :
76 5 : struct TDDPipeData
77 : {
78 : // Members
79 : // Input variables
80 : std::string Name; // Name of TDD pipe
81 : int Dome = 0; // Pointer to the dome object
82 : int Diffuser = 0; // Pointer to the diffuser object
83 : int Construction = 0; // Pointer to the construction object
84 : Real64 Diameter = 0.0; // Pipe diameter
85 : Real64 TotLength = 0.0; // Total length of pipe, including exterior
86 : Real64 Reff = 0.0; // Effective R value between TDD:DOME and TDD:DIFFUSER
87 : int NumOfTZones = 0; // Number of transition zone
88 : Array1D_int TZone; // Pointers to transition zones
89 : Array1D<Real64> TZoneLength; // Length of pipe in each transition zone
90 : // Calculated variables
91 : Real64 AspectRatio = 0.0; // Aspect ratio, length / diameter
92 : Real64 ReflectVis = 0.0; // Visible reflectance of surface
93 : Real64 ReflectSol = 0.0; // Solar reflectance of surface
94 : Array1D<Real64> PipeTransVisBeam; // Table of beam visible transmittance vs. cosine angle
95 : Array1D<Real64> PipeTransSolBeam; // Table of beam solar transmittance vs. cosine angle
96 : Real64 TransSolIso = 0.0; // Diffuse isotropic solar transmittance (constant)
97 : Real64 TransSolHorizon = 0.0; // Diffuse horizon solar transmittance (constant)
98 : Real64 ExtLength = 0.0; // Exterior exposed length of pipe
99 : Array1D<Real64> TZoneHeatGain; // convection gain to transition zones
100 : // Report variables
101 : Real64 TransmittedSolar = 0.0; // Solar transmitted by the TDD [W]
102 : Real64 PipeAbsorbedSolar = 0.0; // Solar absorbed in the walls of the pipe [W]
103 : Real64 HeatGain = 0.0; // Solar heat gain [W]
104 : Real64 HeatLoss = 0.0; // Solar heat loss [W]
105 : Real64 TransVisBeam = 0.0; // TDD visible transmittance
106 : Real64 TransSolBeam = 0.0; // TDD beam solar transmittance
107 : Real64 TransVisDiff = 0.0; // TDD diffuse visible transmittance
108 : Real64 TransSolDiff = 0.0; // TDD diffuse solar transmittance
109 :
110 : // Default Constructor
111 1 : TDDPipeData() : PipeTransVisBeam(DataDaylightingDevices::NumOfAngles, 0.0), PipeTransSolBeam(DataDaylightingDevices::NumOfAngles, 0.0)
112 : {
113 1 : }
114 : };
115 :
116 4 : struct ShelfData
117 : {
118 : // Members
119 : // Input variables
120 : std::string Name; // Name of daylighting shelf
121 : int Window = 0; // Pointer to the window object
122 : int InSurf = 0; // Pointer to the inside shelf heat transfer surface
123 : int OutSurf = 0; // Pointer to the outside shelf attached shading surface
124 : int Construction = 0; // Pointer to the outside shelf construction object
125 : // Calculated variables
126 : Real64 OutReflectVis = 0.0; // Outside shelf visible reflectance
127 : Real64 OutReflectSol = 0.0; // Outside shelf solar reflectance
128 : Real64 ViewFactor = 0.0; // Outside shelf view factor to window
129 : // Report variables
130 : };
131 :
132 : } // namespace DataDaylightingDevices
133 :
134 1542 : struct DataDaylightingDevicesData : BaseGlobalStruct
135 : {
136 : Array1D<DataDaylightingDevices::TDDPipeData> TDDPipe;
137 : Array1D<DataDaylightingDevices::ShelfData> Shelf;
138 :
139 0 : void clear_state() override
140 : {
141 0 : *this = DataDaylightingDevicesData();
142 0 : }
143 : };
144 :
145 : } // namespace EnergyPlus
146 :
147 : #endif
|
