Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef DataUCSDSharedData_hh_INCLUDED
49 : #define DataUCSDSharedData_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/EnergyPlus.hh>
57 :
58 : namespace EnergyPlus {
59 :
60 1542 : struct UCSDSharedData : BaseGlobalStruct
61 : {
62 : // The Eplus surface numbers will be stored in the arrays Apos according to the
63 : // type of surface. The PosZ_Wall array has dimension 2 times the Number of Zones and
64 : // for each zone it has 2 positions: the start and end positions in the Apos_Wall array
65 : // for that specific zone.
66 : Array1D_int APos_Wall;
67 : Array1D_int APos_Floor;
68 : Array1D_int APos_Ceiling;
69 : Array1D_int PosZ_Wall;
70 : Array1D_int PosZ_Floor;
71 : Array1D_int PosZ_Ceiling;
72 : Array1D_int APos_Window;
73 : Array1D_int APos_Door;
74 : Array1D_int APos_Internal;
75 : Array1D_int PosZ_Window;
76 : Array1D_int PosZ_Door;
77 : Array1D_int PosZ_Internal;
78 : // Convection coefficients for the various surfaces
79 : Array1D<Real64> HCeiling;
80 : Array1D<Real64> HWall;
81 : Array1D<Real64> HFloor;
82 : Array1D<Real64> HInternal;
83 : Array1D<Real64> HWindow;
84 : Array1D<Real64> HDoor;
85 0 : void clear_state() override
86 : {
87 0 : this->APos_Wall.clear();
88 0 : this->APos_Floor.clear();
89 0 : this->APos_Ceiling.clear();
90 0 : this->PosZ_Wall.clear();
91 0 : this->PosZ_Floor.clear();
92 0 : this->PosZ_Ceiling.clear();
93 0 : this->APos_Window.clear();
94 0 : this->APos_Door.clear();
95 0 : this->APos_Internal.clear();
96 0 : this->PosZ_Window.clear();
97 0 : this->PosZ_Door.clear();
98 0 : this->PosZ_Internal.clear();
99 : // Convection coeficients for the various surfaces
100 0 : this->HCeiling.clear();
101 0 : this->HWall.clear();
102 0 : this->HFloor.clear();
103 0 : this->HInternal.clear();
104 0 : this->HWindow.clear();
105 0 : this->HDoor.clear();
106 0 : }
107 : };
108 :
109 : } // namespace EnergyPlus
110 :
111 : #endif
|