Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef DataWater_hh_INCLUDED
49 : #define DataWater_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : namespace DataWater {
62 :
63 : enum class TankThermalMode
64 : {
65 : Invalid = -1,
66 : Scheduled, // tank water temperature is user input via schedule
67 : ZoneCoupled, // tank water temperature is modeled using simple UA
68 : Num
69 : };
70 :
71 : enum class RainfallMode
72 : {
73 : Invalid = -1,
74 : None,
75 : RainSchedDesign, // mode of Rainfall determination is Scheduled Design
76 : EPWPrecipitation,
77 : Num
78 : };
79 :
80 : enum class IrrigationMode
81 : {
82 : Invalid = -1,
83 : IrrSchedDesign, // mode of Irrigation determination is Scheduled Design
84 : IrrSmartSched, // mode of irrigation
85 : Num
86 : };
87 :
88 : enum class RainLossFactor
89 : {
90 : Invalid = -1,
91 : Constant,
92 : Scheduled,
93 : Num
94 : };
95 :
96 : enum class AmbientTempType
97 : {
98 : Invalid = -1,
99 : Schedule, // ambient temperature around tank (or HPWH inlet air) is scheduled
100 : Zone, // tank is located in a zone or HPWH inlet air is zone air only
101 : Exterior, // tank is located outdoors or HPWH inlet air is outdoor air only
102 : Num
103 : };
104 :
105 : enum class GroundWaterTable
106 : {
107 : Invalid = -1,
108 : Constant,
109 : Scheduled,
110 : Num
111 : };
112 :
113 : enum class ControlSupplyType
114 : {
115 : Invalid = -1,
116 : NoControlLevel,
117 : MainsFloatValve,
118 : WellFloatValve,
119 : WellFloatMainsBackup,
120 : OtherTankFloatValve,
121 : TankMainsBackup,
122 : Num
123 : };
124 :
125 : enum class Overflow
126 : {
127 : Invalid = -1,
128 : Discarded,
129 : ToTank,
130 : Num
131 : };
132 :
133 15 : struct StorageTankDataStruct
134 : {
135 : // Members
136 : // user input data
137 : std::string Name; // name of this Storage Tank
138 : std::string QualitySubCategoryName; // name of water subcategory
139 : // INTEGER :: QualitySubCategory = 0 !
140 : Real64 MaxCapacity; // tank capacity Limit [m3]
141 : Overflow OverflowMode;
142 : std::string OverflowTankName;
143 : int OverflowTankID;
144 : int OverflowTankSupplyARRID;
145 : Real64 ValveOnCapacity; // tank capacity at lower control range [m3]
146 : Real64 ValveOffCapacity; // tank capacity at upper control range [m3]
147 : bool LastTimeStepFilling; // Indicates that tank was filling up at last timestep, to determine whether to continue until ValveOffCapacity
148 : ControlSupplyType ControlSupply; // mode for tank controlled resupply
149 : int GroundWellID; // index "pointer" to well if present
150 : std::string SupplyTankName;
151 : int SupplyTankID;
152 : int SupplyTankDemandARRID;
153 : Real64 BackupMainsCapacity;
154 : Real64 InitialVolume; // water in tank at start of simulation period [m3]
155 : Real64 MaxInFlowRate; // limit on rate of inlet [m3/s]
156 : Real64 MaxOutFlowRate; // limit on rate of outlet [m3/s]
157 : TankThermalMode ThermalMode;
158 : Real64 InitialTankTemp; // initial tank temperature [C]
159 : int TempSchedID; // index "pointer" to schedule
160 : AmbientTempType AmbientTempIndicator; // Indicator for ambient tank losses (SCHEDULE, ZONE, EXTERIOR)
161 : int AmbientTempSchedule; // Schedule index pointer
162 : int ZoneID; // index "pointer" to zone where tank is
163 : Real64 UValue; // U-value for tank [W/m2-k]
164 : Real64 SurfArea; // surface are of tank on Zone side... [m2]
165 : int InternalMassID; // index "pointer" to internal mass object for thermal coupling
166 : std::string SurfMaterialName; // surface properties
167 : // calculated data and from elsewhere
168 : Real64 ThisTimeStepVolume;
169 : Real64 LastTimeStepVolume;
170 : Real64 LastTimeStepTemp; // previous temperature of tank water
171 : int NumWaterSupplies;
172 : Array1D<Real64> VdotAvailSupply; // Each supply component has its own term
173 : Array1D<Real64> TwaterSupply; // Each supply component has its own term
174 : Array1D_string SupplyCompNames;
175 : Array1D_string SupplyCompTypes;
176 : int NumWaterDemands;
177 : Array1D<Real64> VdotRequestDemand; // each demand componennt has a slot
178 : Array1D<Real64> VdotAvailDemand; // each demand componennt has a slot
179 : Array1D_string DemandCompNames;
180 : Array1D_string DemandCompTypes;
181 : Real64 VdotFromTank;
182 : Real64 VdotToTank;
183 : Real64 VdotOverflow;
184 : Real64 VolOverflow;
185 : // report variables
186 : Real64 NetVdot;
187 : Real64 Twater;
188 : Real64 TouterSkin;
189 : Real64 TwaterOverflow;
190 : Real64 MainsDrawVdot;
191 : Real64 MainsDrawVol;
192 : Real64 SkinLossPower; // heat loss to surrounding zone [W]
193 : Real64 SkinLossEnergy; // heat loss to surround zone [J]
194 : Real64 SkinLossConvect; // convective heat loss to zone [W]
195 : Real64 SkinLossRadiat; // radiative heat loss to zone [W}
196 :
197 : // Default Constructor
198 5 : StorageTankDataStruct()
199 5 : : MaxCapacity(0.0), OverflowMode(Overflow::Invalid), OverflowTankID(0), OverflowTankSupplyARRID(0), ValveOnCapacity(0.0),
200 : ValveOffCapacity(0.0), LastTimeStepFilling(false), ControlSupply(ControlSupplyType::Invalid), GroundWellID(0), SupplyTankID(0),
201 : SupplyTankDemandARRID(0), BackupMainsCapacity(0.0), InitialVolume(0.0), MaxInFlowRate(0.0), MaxOutFlowRate(0.0),
202 : ThermalMode(TankThermalMode::Invalid), InitialTankTemp(20.0), TempSchedID(0), AmbientTempIndicator(AmbientTempType::Invalid),
203 : AmbientTempSchedule(0), ZoneID(0), UValue(0.0), SurfArea(0.0), InternalMassID(0), ThisTimeStepVolume(0.0), LastTimeStepVolume(0.0),
204 : LastTimeStepTemp(0.0), NumWaterSupplies(0), NumWaterDemands(0), VdotFromTank(0.0), VdotToTank(0.0), VdotOverflow(0.0), VolOverflow(0.0),
205 : NetVdot(0.0), Twater(0.0), TouterSkin(0.0), TwaterOverflow(0.0), MainsDrawVdot(0.0), MainsDrawVol(0.0), SkinLossPower(0.0),
206 5 : SkinLossEnergy(0.0), SkinLossConvect(0.0), SkinLossRadiat(0.0)
207 : {
208 5 : }
209 : };
210 :
211 6 : struct RainfallCollectorDataStruct
212 : {
213 : // Members
214 : // user input data
215 : std::string Name; // name of this rain collector
216 : std::string StorageTankName;
217 : int StorageTankID; // index "pointer" to storage tank array
218 : int StorageTankSupplyARRID;
219 : RainLossFactor LossFactorMode; // control how loss factor(s) are entered
220 : Real64 LossFactor; // loss factor when constant
221 : int LossFactorSchedID; // index "pointer" to schedule
222 : Real64 MaxCollectRate;
223 : int NumCollectSurfs; // number of surfaces used in the collector
224 : Array1D_string SurfName;
225 : Array1D_int SurfID;
226 : // calculated and from elsewhere
227 : Real64 HorizArea; // area of surfaces in the vertical normal direction
228 : Real64 VdotAvail;
229 : Real64 VolCollected;
230 : std::array<Real64, 12> VolCollectedMonthly = {0.0}; // Monthly rain water collected in mm;
231 : Real64 MeanHeight;
232 :
233 : // Default Constructor
234 2 : RainfallCollectorDataStruct()
235 2 : : StorageTankID(0), StorageTankSupplyARRID(0), LossFactorMode(RainLossFactor::Invalid), LossFactor(0.0), LossFactorSchedID(0),
236 2 : MaxCollectRate(0.0), NumCollectSurfs(0), HorizArea(0.0), VdotAvail(0.0), VolCollected(0.0), MeanHeight(0.0)
237 : {
238 2 : }
239 : };
240 :
241 6 : struct GroundwaterWellDataStruct
242 : {
243 : // Members
244 : // user input data
245 : std::string Name; // name of this
246 : std::string StorageTankName;
247 : int StorageTankID; // index "pointer" to water storage tank
248 : int StorageTankSupplyARRID; // index "pointer" to storage supply arrays
249 : Real64 PumpDepth; // depth of pump [m]
250 : Real64 PumpNomVolFlowRate; // nominal flow rate of pump [m3/s]
251 : Real64 PumpNomHead; // design nominal capacity of pump
252 : Real64 PumpNomPowerUse; // design nominal power of pump at nom capacity
253 : Real64 PumpEfficiency;
254 : Real64 WellRecoveryRate; // rate at which groundwater can enter well [m3/s]
255 : Real64 NomWellStorageVol; // water storage in well at average water table depth [m3]
256 : GroundWaterTable GroundwaterTableMode; // method of determining water table depth
257 : Real64 WaterTableDepth;
258 : int WaterTableDepthSchedID;
259 : // calculated and from elsewhere
260 : Real64 VdotRequest; // rate of flow over timestep requested by tank
261 : Real64 VdotDelivered; // rate of flow provided [m3/s]
262 : Real64 VolDelivered; // water provided [m3]
263 : Real64 PumpPower;
264 : Real64 PumpEnergy;
265 :
266 : // Default Constructor
267 2 : GroundwaterWellDataStruct()
268 2 : : StorageTankID(0), StorageTankSupplyARRID(0), PumpDepth(0.0), PumpNomVolFlowRate(0.0), PumpNomHead(0.0), PumpNomPowerUse(0.0),
269 : PumpEfficiency(0.0), WellRecoveryRate(0.0), NomWellStorageVol(0.0), GroundwaterTableMode(GroundWaterTable::Invalid),
270 : WaterTableDepth(0.0), WaterTableDepthSchedID(0), VdotRequest(0.0), VdotDelivered(0.0), VolDelivered(0.0), PumpPower(0.0),
271 2 : PumpEnergy(0.0)
272 : {
273 2 : }
274 : };
275 :
276 : struct SiteRainFallDataStruct
277 : {
278 : // Members
279 : RainfallMode ModeID; // type of rainfall modeling
280 : Real64 DesignAnnualRain;
281 : int RainSchedID;
282 : Real64 NomAnnualRain;
283 : // calculated and from elsewhere.
284 : Real64 CurrentRate;
285 : Real64 CurrentAmount; // units of m
286 : std::array<Real64, 12> MonthlyTotalPrecInWeather = {0.0}; // Monthly total rain in weather file [mm]
287 : std::array<Real64, 12> MonthlyTotalPrecInSitePrec = {0.0}; // Monthly total rain in site:precipitation [mm]
288 : std::array<int, 12> numRainyHoursInWeather = {0}; // Monthly number of rainy hours
289 :
290 : // Default Constructor
291 771 : SiteRainFallDataStruct()
292 771 : : ModeID(RainfallMode::None), DesignAnnualRain(0.0), RainSchedID(0), NomAnnualRain(0.0), CurrentRate(0.0), CurrentAmount(0.0)
293 : {
294 771 : }
295 : };
296 :
297 : struct IrrigationDataStruct
298 : {
299 : // Members
300 : IrrigationMode ModeID; // type of irrigation modeling
301 : int IrrSchedID;
302 : Real64 ScheduledAmount;
303 : Real64 ActualAmount;
304 : Real64 IrrigationThreshold; // percent at which no irrigation happens (smart schedule)
305 :
306 : // Default Constructor
307 771 : IrrigationDataStruct() : ModeID(IrrigationMode::Invalid), IrrSchedID(0), ScheduledAmount(0.0), ActualAmount(0.0), IrrigationThreshold(0.4)
308 : {
309 771 : }
310 : };
311 :
312 : } // namespace DataWater
313 :
314 1542 : struct DataWaterData : BaseGlobalStruct
315 : {
316 :
317 : DataWater::SiteRainFallDataStruct
318 : RainFall; // type of rainfall modeling | design annual rain | rain sched id | nominal annual rain | current rate | current amount
319 : DataWater::IrrigationDataStruct
320 : Irrigation; // type of irrigation modeling | Irrigation schedule id | scheduled amount | actual amount | irrigation threshold
321 : Array1D<DataWater::StorageTankDataStruct> WaterStorage;
322 : Array1D<DataWater::RainfallCollectorDataStruct> RainCollector;
323 : Array1D<DataWater::GroundwaterWellDataStruct> GroundwaterWell;
324 :
325 : int NumWaterStorageTanks = 0; // number of water Storage tanks in model
326 : int NumRainCollectors = 0; // number of rainfall collectors in model
327 : int NumGroundWaterWells = 0; // number of
328 : int NumSiteRainFall = 0;
329 : bool AnyWaterSystemsInModel = false; // control flag set true if any water systems
330 : bool WaterSystemGetInputCalled = false; // set true once input data gotten.
331 : bool AnyIrrigationInModel = false; // control flag set true if irrigation input for ecoroof DJS PSU Dec 2006
332 : int PrecipOverwrittenByRainFlag = 0; // recurring warning index when the rain flag is on but the liquidprecipitation = 0
333 :
334 0 : void clear_state() override
335 : {
336 0 : RainFall = {};
337 0 : Irrigation = {};
338 0 : WaterStorage.deallocate();
339 0 : RainCollector.deallocate();
340 0 : GroundwaterWell.deallocate();
341 0 : NumWaterStorageTanks = 0;
342 0 : NumRainCollectors = 0;
343 0 : NumGroundWaterWells = 0;
344 0 : NumSiteRainFall = 0;
345 0 : AnyWaterSystemsInModel = false;
346 0 : WaterSystemGetInputCalled = false;
347 0 : AnyIrrigationInModel = false;
348 0 : PrecipOverwrittenByRainFlag = 0;
349 0 : }
350 : };
351 :
352 : } // namespace EnergyPlus
353 :
354 : #endif
|
