Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef HVACDuct_hh_INCLUDED
49 : #define HVACDuct_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : // Forward declarations
62 : struct EnergyPlusData;
63 :
64 : namespace HVACDuct {
65 :
66 : // Using/Aliasing
67 :
68 : // Data
69 : // MODULE PARAMETER DEFINITIONS:
70 : // na
71 :
72 : // DERIVED TYPE DEFINITIONS:
73 :
74 : // MODULE VARIABLE DECLARATIONS:
75 :
76 : // SUBROUTINE SPECIFICATIONS FOR MODULE HVACDuct:
77 :
78 : // <name Public routines, optionally name Private routines within this module>
79 :
80 : // Types
81 :
82 8 : struct DuctData
83 : {
84 : // Members
85 : std::string Name; // duct unique name
86 : int InletNodeNum; // inlet node number
87 : int OutletNodeNum; // outlet node number
88 :
89 : // Default Constructor
90 2 : DuctData() : InletNodeNum(0), OutletNodeNum(0)
91 : {
92 2 : }
93 : };
94 :
95 : // Object Data
96 :
97 : void SimDuct(EnergyPlusData &state,
98 : std::string_view CompName, // name of the duct component
99 : bool FirstHVACIteration, // TRUE if 1st HVAC simulation of system timestep !unused1208
100 : int &CompIndex // index of duct component
101 : );
102 :
103 : void GetDuctInput(EnergyPlusData &state);
104 :
105 : void InitDuct(EnergyPlusData &state, int DuctNum); // number of the current duct being simulated
106 :
107 : void CalcDuct(int DuctNum); // number of the current duct being simulated !unused1208
108 :
109 : void UpdateDuct(EnergyPlusData &state, int DuctNum); // number of the current duct being simulated
110 :
111 : void ReportDuct(int DuctNum); // number of the current duct being simulated !unused1208
112 :
113 : } // namespace HVACDuct
114 :
115 1542 : struct HVACDuctData : BaseGlobalStruct
116 : {
117 :
118 : int NumDucts = 0;
119 : Array1D_bool CheckEquipName;
120 : Array1D<HVACDuct::DuctData> Duct;
121 : bool GetInputFlag = true; // First time, input is "gotten"
122 :
123 0 : void clear_state() override
124 : {
125 0 : NumDucts = 0;
126 0 : CheckEquipName.clear();
127 0 : Duct.clear();
128 0 : GetInputFlag = true; // First time, input is "gotten"
129 0 : }
130 : };
131 :
132 : } // namespace EnergyPlus
133 :
134 : #endif
|