Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 : #ifndef HybridUnitaryAirConditioners_hh_INCLUDED
48 : #define HybridUnitaryAirConditioners_hh_INCLUDED
49 :
50 : // ObjexxFCL Headers
51 : #include <ObjexxFCL/Array1D.hh>
52 :
53 : // EnergyPlus Headers
54 : #include <EnergyPlus/Data/BaseData.hh>
55 : #include <EnergyPlus/DataGlobals.hh>
56 : #include <EnergyPlus/DataZoneEquipment.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 : #include <EnergyPlus/HybridEvapCoolingModel.hh>
59 :
60 : namespace EnergyPlus {
61 :
62 : // Forward declarations
63 : struct EnergyPlusData;
64 :
65 : namespace HybridUnitaryAirConditioners {
66 :
67 : using HybridEvapCoolingModel::CSetting;
68 : using HybridEvapCoolingModel::Model;
69 :
70 : // MODULE PARAMETER DEFINITIONS
71 : void SimZoneHybridUnitaryAirConditioners(EnergyPlusData &state,
72 : std::string_view CompName, // name of the packaged terminal heat pump
73 : int ZoneNum, // number of zone being served
74 : Real64 &SensibleOutputProvided, // sensible capacity delivered to zone
75 : Real64 &LatentOutputProvided, // Latent add/removal (kg/s), dehumid = negative
76 : int &CompIndex // index to zone hvac unit
77 : );
78 :
79 : void GetInputZoneHybridUnitaryAirConditioners(EnergyPlusData &state, bool &Errors);
80 :
81 : void InitZoneHybridUnitaryAirConditioners(EnergyPlusData &state,
82 : int UnitNum, // unit number
83 : int ZoneNum // number of zone being served
84 : );
85 :
86 : void CalcZoneHybridUnitaryAirConditioners(EnergyPlusData &state,
87 : int UnitNum, // unit number
88 : int ZoneNum, // number of zone being served
89 : Real64 &SensibleOutputProvided, // sensible capacity delivered to zone
90 : Real64 &LatentOutputProvided // Latent add/removal (kg/s), dehumid = negative
91 : );
92 :
93 : void ReportZoneHybridUnitaryAirConditioners(EnergyPlusData &state, int UnitNum);
94 :
95 : int GetHybridUnitaryACOutAirNode(EnergyPlusData &state, int UnitNum);
96 :
97 : int GetHybridUnitaryACZoneInletNode(EnergyPlusData &state, int UnitNum);
98 :
99 : int GetHybridUnitaryACReturnAirNode(EnergyPlusData &state, int UnitNum);
100 :
101 : } // namespace HybridUnitaryAirConditioners
102 :
103 1542 : struct HybridUnitaryAirConditionersData : BaseGlobalStruct
104 : {
105 :
106 : int NumZoneHybridEvap = 0;
107 : bool GetInputZoneHybridEvap = true;
108 : bool ZoneEquipmentListChecked = false;
109 : bool HybridCoolOneTimeFlag = true;
110 : Array1D_bool CheckZoneHybridEvapName;
111 : EPVector<HybridUnitaryAirConditioners::Model> ZoneHybridUnitaryAirConditioner;
112 : Array1D_bool MySizeFlag;
113 : Array1D_bool MyEnvrnFlag;
114 : Array1D_bool MyFanFlag;
115 : Array1D_bool MyZoneEqFlag; // used to set up zone equipment availability managers
116 :
117 0 : void clear_state() override
118 : {
119 0 : this->NumZoneHybridEvap = 0;
120 0 : this->GetInputZoneHybridEvap = true;
121 0 : this->ZoneEquipmentListChecked = false;
122 0 : this->HybridCoolOneTimeFlag = true;
123 0 : this->CheckZoneHybridEvapName.deallocate();
124 0 : this->ZoneHybridUnitaryAirConditioner.deallocate();
125 0 : this->MySizeFlag.clear();
126 0 : this->MyEnvrnFlag.clear();
127 0 : this->MyFanFlag.clear();
128 0 : this->MyZoneEqFlag.clear();
129 0 : }
130 : };
131 :
132 : } // namespace EnergyPlus
133 : #endif
|
