Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef MoistureBalanceEMPDManager_hh_INCLUDED
49 : #define MoistureBalanceEMPDManager_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataHeatBalance.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 : #include <EnergyPlus/Material.hh>
59 :
60 : namespace EnergyPlus {
61 :
62 : // Forward declarations
63 : struct EnergyPlusData;
64 :
65 : namespace MoistureBalanceEMPDManager {
66 :
67 : struct EMPDReportVarsData
68 : {
69 : Real64 rv_surface;
70 : Real64 RH_surface_layer;
71 : Real64 RH_deep_layer;
72 : Real64 w_surface_layer;
73 : Real64 w_deep_layer;
74 : Real64 mass_flux_zone;
75 : Real64 mass_flux_deep;
76 : Real64 u_surface_layer;
77 : Real64 u_deep_layer;
78 :
79 : // Default constructor
80 58 : EMPDReportVarsData()
81 58 : : rv_surface(0.015), RH_surface_layer(0.0), RH_deep_layer(0.0), w_surface_layer(0.015), w_deep_layer(0.015), mass_flux_zone(0.0),
82 58 : mass_flux_deep(0.0), u_surface_layer(0.0), u_deep_layer(0.0)
83 : {
84 58 : }
85 : };
86 :
87 : // Functions
88 : Real64 CalcDepthFromPeriod(EnergyPlusData &state,
89 : Real64 period, // in seconds
90 : Material::MaterialProperties const &mat // material
91 : );
92 :
93 : void GetMoistureBalanceEMPDInput(EnergyPlusData &state);
94 :
95 : void InitMoistureBalanceEMPD(EnergyPlusData &state);
96 :
97 : void CalcMoistureBalanceEMPD(EnergyPlusData &state,
98 : int SurfNum,
99 : Real64 SurfTempIn, // INSIDE SURFACE TEMPERATURE at current time step
100 : Real64 TempZone, // Zone temperature at current time step.
101 : Real64 &TempSat // Saturated surface temperature.
102 : );
103 :
104 : void UpdateMoistureBalanceEMPD(EnergyPlusData &state, int SurfNum); // Surface number
105 :
106 : void ReportMoistureBalanceEMPD(EnergyPlusData &state);
107 :
108 : } // namespace MoistureBalanceEMPDManager
109 :
110 1542 : struct MoistureBalanceEMPDManagerData : BaseGlobalStruct
111 : {
112 :
113 : // Array of structs that hold the empd report vars data, one for each surface.
114 : EPVector<MoistureBalanceEMPDManager::EMPDReportVarsData> EMPDReportVars;
115 : bool InitEnvrnFlag = true;
116 : int ErrCount = 0;
117 : bool OneTimeFlag = true;
118 :
119 0 : void clear_state() override
120 : {
121 0 : this->EMPDReportVars.deallocate();
122 0 : this->InitEnvrnFlag = true;
123 0 : this->ErrCount = 0;
124 0 : this->OneTimeFlag = true;
125 0 : }
126 : };
127 :
128 : } // namespace EnergyPlus
129 :
130 : #endif
|
