Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef PlantTopologyBranch_hh_INCLUDED
49 : #define PlantTopologyBranch_hh_INCLUDED
50 :
51 : #include <EnergyPlus/DataBranchAirLoopPlant.hh>
52 : #include <EnergyPlus/Plant/Component.hh>
53 :
54 : namespace EnergyPlus {
55 : namespace DataPlant {
56 :
57 216494 : struct BranchData
58 : {
59 : // Members
60 : std::string Name; // Name of the branch
61 : DataBranchAirLoopPlant::ControlType controlType;
62 : Real64 RequestedMassFlow;
63 : bool HasConstantSpeedBranchPump; // true if branch has a constant speed branch pump
64 : Real64 ConstantSpeedBranchMassFlow; // nominal flow rate if constant speed branch pump on
65 : int BranchLevel;
66 : int FlowErrCount; // For recurring error counting
67 : int FlowErrIndex; // For recurring error index
68 : int TotalComponents; // Total number of components on the branch
69 : int NodeNumIn; // Component inlet node number
70 : int NodeNumOut; // Component outlet node number
71 : bool IsBypass;
72 : int PumpIndex;
73 : Real64 PumpSizFac;
74 : bool EMSCtrlOverrideOn; // if true, EMS is calling to override branch operation avail
75 : Real64 EMSCtrlOverrideValue; // value set by EMS system for branch override controls
76 : Array1D<CompData> Comp; // Component type list
77 : bool HasPressureComponents;
78 : Real64 PressureDrop;
79 : DataBranchAirLoopPlant::PressureCurveType PressureCurveType; // Either none, pressure curve, or generic curve
80 : int PressureCurveIndex; // Curve: index for pressure drop calculations
81 : Real64 PressureEffectiveK;
82 : bool disableOverrideForCSBranchPumping;
83 : int lastComponentSimulated;
84 :
85 : // Default Constructor
86 2218 : BranchData()
87 2218 : : controlType(DataBranchAirLoopPlant::ControlType::Invalid), RequestedMassFlow(0.0), HasConstantSpeedBranchPump(false),
88 : ConstantSpeedBranchMassFlow(0.0), BranchLevel(0), FlowErrCount(0), FlowErrIndex(0), TotalComponents(0), NodeNumIn(0), NodeNumOut(0),
89 : IsBypass(false), PumpIndex(0), PumpSizFac(1.0), EMSCtrlOverrideOn(false), EMSCtrlOverrideValue(0.0), HasPressureComponents(false),
90 : PressureDrop(0.0), PressureCurveType(DataBranchAirLoopPlant::PressureCurveType::Invalid), PressureCurveIndex(0),
91 2218 : PressureEffectiveK(0.0), disableOverrideForCSBranchPumping(false), lastComponentSimulated(0)
92 : {
93 2218 : }
94 :
95 : // Max abs of Comp array MyLoad values //Autodesk:Tuned For replacement of any( abs( Comp.MyLoad() > SmallLoad ) usage
96 369569 : Real64 max_abs_Comp_MyLoad() const
97 : {
98 369569 : Real64 load(0.0); // Return value
99 1108707 : for (int i = Comp.l(), e = Comp.u(); i <= e; ++i) {
100 739138 : load = max(load, std::abs(Comp(i).MyLoad));
101 : }
102 369569 : return load;
103 : }
104 :
105 : Real64 DetermineBranchFlowRequest(EnergyPlusData &state);
106 : };
107 :
108 : } // namespace DataPlant
109 : } // namespace EnergyPlus
110 :
111 : #endif
|