Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #include <EnergyPlus/Data/EnergyPlusData.hh>
49 : #include <EnergyPlus/Plant/Component.hh>
50 : #include <EnergyPlus/Plant/DataPlant.hh>
51 :
52 : namespace EnergyPlus {
53 : namespace DataPlant {
54 :
55 65867 : void CompData::initLoopEquip(EnergyPlusData &state, bool const GetCompSizFac)
56 : {
57 65867 : this->compPtr->onInitLoopEquip(state, this->location);
58 65867 : this->compPtr->getDesignCapacities(state, this->location, this->MaxLoad, this->MinLoad, this->OptLoad);
59 65867 : this->compPtr->getDesignTemperatures(this->TempDesCondIn, this->TempDesEvapOut);
60 :
61 65867 : if (GetCompSizFac) {
62 12935 : this->compPtr->getSizingFactor(this->SizFac);
63 : }
64 65867 : }
65 :
66 394913738 : void CompData::simulate(EnergyPlusData &state, bool const FirstHVACIteration)
67 : {
68 :
69 : // SUBROUTINE INFORMATION:
70 : // AUTHOR Dan Fisher
71 : // DATE WRITTEN July 1998
72 : // MODIFIED June 2000 -Brandon Anderson
73 : // Changed to Group Similar Components. Components will
74 : // be defined by ComponentType:SpecificComponent.
75 : // The colon will act as the type delimeter, So all
76 : // components of one type will be grouped. ex.(Boilers,Chillers)
77 : // May 2003 - Simon Rees
78 : // Added initial loop to force free cooling chiller etc to be
79 : // simulated before other components.
80 : // RE-ENGINEERED na
81 :
82 : // PURPOSE OF THIS SUBROUTINE:
83 : // This subroutine calls the appropriate routines to simulate
84 : // the equipment on the plant.
85 :
86 : // METHODOLOGY EMPLOYED:
87 : // This subroutine employs a rule-based
88 : // scheme to operate the plant equipment simulation without
89 : // requiring a detailed flow network solver. The scheme is based
90 : // on several restrictive assumptions which may be relaxed when
91 : // a more detailed solution technique is developed. The current
92 : // assumptions are:
93 : // 1. All loop cooling/heating equipment is connected
94 : // in parallel.
95 : // 2. Only one circulation pump may be specified per loop.
96 : // 3. The circulation pump must be specified first in the
97 : // simulation order and is assumed to be connected in
98 : // series with the cooling/heating equipment.
99 : // 4. The Circ. pump determines the maximum flow rate for
100 : // the loop.
101 : // The scheme is valid only for Part Load based plant equipment
102 : // models (currently the only type implemented). Each equipment
103 : // simulation updates its outlet node temperature, estimates its
104 : // flow rate and returns a remaining loop demand which is passed
105 : // on to the other available equipment.
106 :
107 : // NOTE: All Equipment return the index of their lists during "InitLoopEquip"
108 : // as a time reduction measure. Specific ifs are set to catch those modules that don't.
109 : // If you add a module or new equipment type, you must set up this structure.
110 :
111 : // SUBROUTINE LOCAL VARIABLE DECLARATIONS:
112 :
113 394913738 : this->compPtr->simulate(state, this->location, FirstHVACIteration, this->MyLoad, this->ON);
114 394913738 : }
115 :
116 12951 : void CompData::oneTimeInit(EnergyPlusData &state) const
117 : {
118 12951 : if (this->compPtr->oneTimeInitFlag) {
119 8133 : this->compPtr->oneTimeInit_new(state);
120 8133 : this->compPtr->oneTimeInitFlag = false;
121 : }
122 12951 : }
123 :
124 107551096 : CompData &CompData::getPlantComponent(EnergyPlusData &state, PlantLocation const &plantLoc)
125 : {
126 107551096 : return state.dataPlnt->PlantLoop(plantLoc.loopNum).LoopSide(plantLoc.loopSideNum).Branch(plantLoc.branchNum).Comp(plantLoc.compNum);
127 : }
128 :
129 : } // namespace DataPlant
130 2313 : } // namespace EnergyPlus
|