Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef PlantPressureSystem_hh_INCLUDED
49 : #define PlantPressureSystem_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Optional.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/EnergyPlus.hh>
57 :
58 : namespace EnergyPlus {
59 :
60 : // Forward declarations
61 : struct EnergyPlusData;
62 :
63 : namespace PlantPressureSystem {
64 :
65 : void SimPressureDropSystem(
66 : EnergyPlusData &state,
67 : int LoopNum, // Plant Loop to update pressure information
68 : bool FirstHVACIteration, // System flag
69 : DataPlant::PressureCall CallType, // Enumerated call type
70 : DataPlant::LoopSideLocation LoopSideNum = DataPlant::LoopSideLocation::Invalid, // Loop side num for specific branch simulation
71 : Optional_int_const BranchNum = _ // Branch num for specific branch simulation
72 : );
73 :
74 : void InitPressureDrop(EnergyPlusData &state, int LoopNum, bool FirstHVACIteration);
75 :
76 : void BranchPressureDrop(EnergyPlusData &state,
77 : int LoopNum, // Plant Loop Index
78 : DataPlant::LoopSideLocation LoopSideNum, // LoopSide on Plant Loop LoopNum
79 : int BranchNum // Branch Index on LoopSide LoopSideNum
80 : );
81 :
82 : void UpdatePressureDrop(EnergyPlusData &state, int LoopNum);
83 :
84 : void DistributePressureOnBranch(EnergyPlusData &state,
85 : const int LoopNum,
86 : const DataPlant::LoopSideLocation LoopSideNum,
87 : const int BranchNum,
88 : Real64 &BranchPressureDrop,
89 : bool &PumpFound);
90 :
91 : void PassPressureAcrossMixer(EnergyPlusData &state,
92 : const int LoopNum,
93 : const DataPlant::LoopSideLocation LoopSideNum,
94 : Real64 &MixerPressure,
95 : const int NumBranchesOnLoopSide);
96 :
97 : void PassPressureAcrossSplitter(EnergyPlusData &state,
98 : const int LoopNum,
99 : const DataPlant::LoopSideLocation LoopSideNum,
100 : Real64 &SplitterInletPressure);
101 :
102 : void PassPressureAcrossInterface(EnergyPlusData &state, int LoopNum);
103 :
104 : Real64 ResolveLoopFlowVsPressure(EnergyPlusData &state,
105 : int LoopNum, // - Index of which plant/condenser loop is being simulated
106 : Real64 SystemMassFlow, // - Initial "guess" at system mass flow rate [kg/s]
107 : int PumpCurveNum, // - Pump curve to use when calling the curve manager for psi = f(phi)
108 : Real64 PumpSpeed, // - Pump rotational speed, [rps] (revs per second)
109 : Real64 PumpImpellerDia, // - Nominal pump impeller diameter [m]
110 : Real64 MinPhi, // - Minimum allowable value of phi, requested by the pump manager from curve mgr
111 : Real64 MaxPhi // - Maximum allowable value of phi, requested by the pump manager from curve mgr
112 : );
113 :
114 : } // namespace PlantPressureSystem
115 :
116 1542 : struct PlantPressureSysData : BaseGlobalStruct
117 : {
118 :
119 : bool InitPressureDropOneTimeInit = true;
120 : Array1D_bool LoopInit;
121 : std::array<bool, static_cast<int>(DataPlant::LoopSideLocation::Num)> FullParallelBranchSetFound{false, false};
122 : bool CommonPipeErrorEncountered = false;
123 : int ErrorCounter = 0; // For proper error handling
124 : int ZeroKWarningCounter = 0;
125 : int MaxIterWarningCounter = 0;
126 :
127 0 : void clear_state() override
128 : {
129 0 : this->InitPressureDropOneTimeInit = true;
130 0 : this->LoopInit.clear();
131 0 : this->FullParallelBranchSetFound = {false, false};
132 0 : this->CommonPipeErrorEncountered = false;
133 0 : this->ErrorCounter = 0;
134 0 : this->ZeroKWarningCounter = 0;
135 0 : this->MaxIterWarningCounter = 0;
136 0 : }
137 : };
138 :
139 : } // namespace EnergyPlus
140 :
141 : #endif
|