Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef SizingManager_hh_INCLUDED
49 : #define SizingManager_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : // Forward declarations
62 : struct EnergyPlusData;
63 :
64 : namespace SizingManager {
65 :
66 472 : struct ZoneListData
67 : {
68 : // Members
69 : std::string Name;
70 : int NumOfZones;
71 : Array1D_int Zones;
72 :
73 : // Default Constructor
74 420 : ZoneListData() : NumOfZones(0)
75 : {
76 420 : }
77 : };
78 :
79 : void ManageSizing(EnergyPlusData &state);
80 :
81 : bool CalcdoLoadComponentPulseNow(
82 : EnergyPlusData &state, bool isPulseZoneSizing, bool WarmupFlag, int HourOfDay, int TimeStep, DataGlobalConstants::KindOfSim KindOfSim);
83 :
84 : void ManageSystemSizingAdjustments(EnergyPlusData &state);
85 :
86 : void ManageSystemVentilationAdjustments(EnergyPlusData &state);
87 :
88 : void DetermineSystemPopulationDiversity(EnergyPlusData &state);
89 :
90 : void GetOARequirements(EnergyPlusData &state);
91 :
92 : void ProcessInputOARequirements(EnergyPlusData &state,
93 : std::string const &cCurrentModuleObject,
94 : int OAIndex,
95 : Array1D_string const &cAlphaArgs,
96 : int &NumAlphas,
97 : Array1D<Real64> const &rNumericArgs,
98 : int &NumNumbers,
99 : Array1D_bool const &lAlphaFieldBlanks,
100 : Array1D_string const &cAlphaFieldNames,
101 : bool &ErrorsFound // If errors found in input
102 : );
103 :
104 : void GetZoneAirDistribution(EnergyPlusData &state);
105 :
106 : void GetZoneHVACSizing(EnergyPlusData &state);
107 :
108 : void GetAirTerminalSizing(EnergyPlusData &state);
109 :
110 : void GetSizingParams(EnergyPlusData &state);
111 :
112 : void GetZoneSizingInput(EnergyPlusData &state);
113 :
114 : void ReportTemperatureInputError(EnergyPlusData &state,
115 : std::string cObjectName,
116 : int const paramNum,
117 : Real64 comparisonTemperature,
118 : bool const shouldFlagSevere,
119 : bool &ErrorsFound);
120 :
121 : void GetZoneAndZoneListNames(
122 : EnergyPlusData &state, bool &ErrorsFound, int &NumZones, Array1D_string &ZoneNames, int &NumZoneLists, Array1D<ZoneListData> &ZoneListNames);
123 :
124 : void GetSystemSizingInput(EnergyPlusData &state);
125 :
126 : void GetPlantSizingInput(EnergyPlusData &state);
127 :
128 : void SetupZoneSizing(EnergyPlusData &state, bool &ErrorsFound);
129 :
130 : void ReportZoneSizing(EnergyPlusData &state,
131 : std::string const &ZoneName, // the name of the zone
132 : std::string const &LoadType, // the description of the input variable
133 : Real64 CalcDesLoad, // the value from the sizing calculation [W]
134 : Real64 UserDesLoad, // the value from the sizing calculation modified by user input [W]
135 : Real64 CalcDesFlow, // calculated design air flow rate [m3/s]
136 : Real64 UserDesFlow, // user input or modified design air flow rate [m3/s]
137 : std::string const &DesDayName, // the name of the design day that produced the peak
138 : std::string const &PeakHrMin, // time stamp of the peak
139 : Real64 PeakTemp, // temperature at peak [C]
140 : Real64 PeakHumRat, // humidity ratio at peak [kg water/kg dry air]
141 : Real64 FloorArea, // zone floor area [m2]
142 : Real64 TotOccs, // design number of occupants for the zone
143 : Real64 MinOAVolFlow, // zone design minimum outside air flow rate [m3/s]
144 : Real64 DOASHeatAddRate // zone design heat addition rate from the DOAS [W]
145 : );
146 :
147 : void ReportSysSizing(EnergyPlusData &state,
148 : std::string const &SysName, // the name of the zone
149 : std::string const &LoadType, // either "Cooling" or "Heating"
150 : std::string const &PeakLoadType, // either "Sensible" or "Total"
151 : Real64 UserDesCap, // User Design Capacity
152 : Real64 CalcDesVolFlow, // Calculated Design Air Flow Rate
153 : Real64 UserDesVolFlow, // User Design Air Flow Rate
154 : std::string const &DesDayName, // the name of the design day that produced the peak
155 : std::string const &DesDayDate, // the date that produced the peak
156 : int TimeStepIndex // time step of the peak
157 : );
158 :
159 : std::string TimeIndexToHrMinString(EnergyPlusData &state, int timeIndex);
160 :
161 : void UpdateFacilitySizing(EnergyPlusData &state, DataGlobalConstants::CallIndicator CallIndicator);
162 :
163 : void UpdateTermUnitFinalZoneSizing(EnergyPlusData &state);
164 :
165 : } // namespace SizingManager
166 :
167 771 : struct SizingManagerData : BaseGlobalStruct
168 : {
169 :
170 : // MODULE VARIABLE DECLARATIONS:
171 : int NumAirLoops = 0;
172 : bool ReportZoneSizingMyOneTimeFlag = true;
173 : bool ReportSysSizingMyOneTimeFlag = true;
174 : bool runZeroingOnce = true;
175 :
176 0 : void clear_state() override
177 : {
178 0 : NumAirLoops = 0;
179 0 : ReportZoneSizingMyOneTimeFlag = true;
180 0 : ReportSysSizingMyOneTimeFlag = true;
181 0 : runZeroingOnce = true;
182 0 : }
183 : };
184 :
185 : } // namespace EnergyPlus
186 :
187 : #endif
|