Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef SplitterComponent_hh_INCLUDED
49 : #define SplitterComponent_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : // Forward declarations
62 : struct EnergyPlusData;
63 :
64 : namespace SplitterComponent {
65 :
66 2882 : struct SplitterConditions // public because USEd by SimAirServingZones and the Direct Air Unit
67 : {
68 : // Members
69 : std::string SplitterName; // Name of the Splitter
70 : Real64 InletTemp;
71 : Real64 InletHumRat;
72 : Real64 InletEnthalpy;
73 : Real64 InletPressure;
74 : int InletNode;
75 : Real64 InletMassFlowRate; // MassFlow through the Splitter being Simulated [kg/Sec]
76 : Real64 InletMassFlowRateMaxAvail; // Max Avail MassFlow through the Splitter being Simulated [kg/Sec]
77 : Real64 InletMassFlowRateMinAvail; // Min Avail MassFlow through the Splitter being Simulated [kg/Sec]
78 : int NumOutletNodes;
79 : Array1D_int OutletNode;
80 : Array1D<Real64> OutletMassFlowRate;
81 : Array1D<Real64> OutletMassFlowRateMaxAvail;
82 : Array1D<Real64> OutletMassFlowRateMinAvail;
83 : Array1D<Real64> OutletTemp;
84 : Array1D<Real64> OutletHumRat;
85 : Array1D<Real64> OutletEnthalpy;
86 : Array1D<Real64> OutletPressure;
87 :
88 : // Default Constructor
89 522 : SplitterConditions()
90 522 : : InletTemp(0.0), InletHumRat(0.0), InletEnthalpy(0.0), InletPressure(0.0), InletNode(0), InletMassFlowRate(0.0),
91 522 : InletMassFlowRateMaxAvail(0.0), InletMassFlowRateMinAvail(0.0), NumOutletNodes(0)
92 : {
93 522 : }
94 : };
95 :
96 : void SimAirLoopSplitter(EnergyPlusData &state,
97 : std::string_view CompName,
98 : bool const FirstHVACIteration,
99 : bool const FirstCall,
100 : bool &SplitterInletChanged,
101 : int &CompIndex);
102 :
103 : void GetSplitterInput(EnergyPlusData &state);
104 :
105 : void InitAirLoopSplitter(EnergyPlusData &state, int const SplitterNum, bool const FirstHVACIteration, bool const FirstCall);
106 :
107 : void CalcAirLoopSplitter(EnergyPlusData &state, int const SplitterNum, bool const FirstCall);
108 :
109 : void UpdateSplitter(EnergyPlusData &state, int const SplitterNum, bool &SplitterInletChanged, bool const FirstCall);
110 :
111 : void ReportSplitter(int const SplitterNum);
112 :
113 : int GetSplitterOutletNumber(EnergyPlusData &state,
114 : std::string const &SplitterName, // must match Splitter names for the Splitter type
115 : int const SplitterNum, // Index of Splitters
116 : bool &ErrorsFound // set to true if problem
117 : );
118 :
119 : Array1D_int GetSplitterNodeNumbers(EnergyPlusData &state,
120 : std::string const &SplitterName, // must match Splitter names for the Splitter type
121 : int const SplitterNum, // Index of Splitters
122 : bool &ErrorsFound // set to true if problem
123 : );
124 :
125 : } // namespace SplitterComponent
126 :
127 771 : struct SplitterComponentData : BaseGlobalStruct
128 : {
129 :
130 : bool GetSplitterInputFlag = true;
131 : // Public because Used by SimAirServingZones and the Direct Air Unit
132 : int NumSplitters = 0; // The Number of Splitters found in the Input
133 : Array1D_bool CheckEquipName;
134 : bool MyEnvrnFlag = true;
135 :
136 : Array1D<SplitterComponent::SplitterConditions> SplitterCond;
137 :
138 0 : void clear_state() override
139 : {
140 0 : GetSplitterInputFlag = true;
141 0 : NumSplitters = 0;
142 0 : CheckEquipName.deallocate();
143 0 : SplitterCond.deallocate();
144 0 : MyEnvrnFlag = true;
145 0 : }
146 :
147 : // Default Constructor
148 771 : SplitterComponentData() = default;
149 : };
150 : } // namespace EnergyPlus
151 :
152 : #endif
|
