Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef ThermalChimney_hh_INCLUDED
49 : #define ThermalChimney_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 : #include <ObjexxFCL/Array2A.hh>
54 :
55 : // EnergyPlus Headers
56 : #include <EnergyPlus/Data/BaseData.hh>
57 : #include <EnergyPlus/DataGlobals.hh>
58 : #include <EnergyPlus/EnergyPlus.hh>
59 :
60 : namespace EnergyPlus {
61 :
62 : // Forward declarations
63 : struct EnergyPlusData;
64 :
65 : namespace ThermalChimney {
66 :
67 743 : struct ThermalChimneyData
68 : {
69 : // Members
70 : std::string Name;
71 : int RealZonePtr;
72 : std::string RealZoneName;
73 : int SchedPtr;
74 : std::string SchedName;
75 : Real64 AbsorberWallWidth;
76 : Real64 AirOutletCrossArea;
77 : Real64 DischargeCoeff;
78 : int TotZoneToDistrib;
79 : bool EMSOverrideOn; // if true then EMS is requesting to override
80 : Real64 EMSAirFlowRateValue; // value EMS is setting for air flow rate
81 : Array1D_int ZonePtr;
82 : Array1D_string ZoneName;
83 : Array1D<Real64> DistanceThermChimInlet;
84 : Array1D<Real64> RatioThermChimAirFlow;
85 : Array1D<Real64> EachAirInletCrossArea;
86 :
87 : // Default Constructor
88 741 : ThermalChimneyData()
89 741 : : RealZonePtr(0), SchedPtr(0), AbsorberWallWidth(0.0), AirOutletCrossArea(0.0), DischargeCoeff(0.0), TotZoneToDistrib(0),
90 741 : EMSOverrideOn(false), EMSAirFlowRateValue(0)
91 : {
92 741 : }
93 : };
94 :
95 : struct ThermChimZnReportVars
96 : {
97 : // Members
98 : Real64 ThermalChimneyHeatLoss; // Heat Gain {Joules} due to ThermalChimney
99 : Real64 ThermalChimneyHeatGain; // Heat Loss {Joules} due to ThermalChimney
100 : Real64 ThermalChimneyVolume; // Volume of Air {m3} due to ThermalChimney
101 : Real64 ThermalChimneyMass; // Mass of Air {kg} due to ThermalChimney
102 :
103 : // Default Constructor
104 5448 : ThermChimZnReportVars() : ThermalChimneyHeatLoss(0.0), ThermalChimneyHeatGain(0.0), ThermalChimneyVolume(0.0), ThermalChimneyMass(0.0)
105 : {
106 5448 : }
107 : };
108 :
109 : struct ThermChimReportVars
110 : {
111 : // Members
112 : Real64 OverallTCVolumeFlow; // Volume of Air {m3/s} due to ThermalChimney
113 : Real64 OverallTCVolumeFlowStd; // Volume of Air {m3/s} due to ThermalChimney at standard conditions
114 : Real64 OverallTCMassFlow; // Mass of Air {kg/s} due to ThermalChimney
115 : Real64 OutletAirTempThermalChim; // Air Temp {C} of ThermalChimney
116 :
117 : // Default Constructor
118 741 : ThermChimReportVars() : OverallTCVolumeFlow(0.0), OverallTCVolumeFlowStd(0.0), OverallTCMassFlow(0.0), OutletAirTempThermalChim(0.0)
119 : {
120 741 : }
121 : };
122 :
123 : // Functions
124 :
125 : void ManageThermalChimney(EnergyPlusData &state);
126 :
127 : void GetThermalChimney(EnergyPlusData &state, bool &ErrorsFound); // If errors found in input
128 :
129 : void CalcThermalChimney(EnergyPlusData &state);
130 :
131 : void ReportThermalChimney(EnergyPlusData &state);
132 :
133 : void GaussElimination(Array2A<Real64> EquaCoef, Array1D<Real64> &EquaConst, Array1D<Real64> &ThermChimSubTemp, int const NTC);
134 :
135 : // End of Module Subroutines for ThermalChimney
136 :
137 : //*****************************************************************************************
138 :
139 : } // namespace ThermalChimney
140 771 : struct ThermalChimneysData : BaseGlobalStruct
141 : {
142 :
143 : bool ThermalChimneyGetInputFlag = true;
144 : int TotThermalChimney = 0; // Total ThermalChimney Statements in input
145 :
146 : EPVector<ThermalChimney::ThermalChimneyData> ThermalChimneySys;
147 : EPVector<ThermalChimney::ThermChimZnReportVars> ZnRptThermChim;
148 : EPVector<ThermalChimney::ThermChimReportVars> ThermalChimneyReport;
149 :
150 0 : void clear_state() override
151 : {
152 0 : ThermalChimneyGetInputFlag = true;
153 0 : ZnRptThermChim.deallocate();
154 0 : ThermalChimneySys.deallocate();
155 0 : ThermalChimneyReport.deallocate();
156 0 : }
157 :
158 : // Default Constructor
159 771 : ThermalChimneysData() = default;
160 : };
161 : } // namespace EnergyPlus
162 :
163 : #endif
|