Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef UFADManager_hh_INCLUDED
49 : #define UFADManager_hh_INCLUDED
50 :
51 : // EnergyPlus Headers
52 : #include <EnergyPlus/Data/BaseData.hh>
53 : #include <EnergyPlus/EnergyPlus.hh>
54 :
55 : namespace EnergyPlus {
56 :
57 : // Forward declarations
58 : struct EnergyPlusData;
59 :
60 : namespace UFADManager {
61 :
62 : void ManageUCSDUFModels(EnergyPlusData &state,
63 : int const ZoneNum, // index number for the specified zone
64 : DataRoomAirModel::RoomAirModel const ZoneModelType // type of zone model; UCSDUFI = 6
65 : );
66 :
67 : void InitUCSDUF(EnergyPlusData &state,
68 : int const ZoneNum,
69 : DataRoomAirModel::RoomAirModel const ZoneModelType // type of zone model; UCSDUFI = 6
70 : );
71 :
72 : void SizeUCSDUF(EnergyPlusData &state,
73 : int const ZoneNum,
74 : DataRoomAirModel::RoomAirModel const ZoneModelType // type of zone model; UCSDUFI = 6
75 : );
76 :
77 : void HcUCSDUF(EnergyPlusData &state, int const ZoneNum, Real64 const FractionHeight);
78 :
79 : void CalcUCSDUI(EnergyPlusData &state, int const ZoneNum); // index number for the specified zone
80 :
81 : void CalcUCSDUE(EnergyPlusData &state, int const ZoneNum); // index number for the specified zone
82 :
83 : } // namespace UFADManager
84 :
85 771 : struct UFADManagerData : BaseGlobalStruct
86 : {
87 :
88 : Real64 HAT_MX = 0.0; // HAT_MX Convection Coefficient times Area times Temperature for the upper subzone
89 : Real64 HAT_MXWin = 0.0; // HAT_MX Convection Coefficient times Area times Temperature for the upper subzone (windows only)
90 : Real64 HA_MX = 0.0; // HA_MX Convection Coefficient times Area for the upper subzone
91 : Real64 HA_MXWin = 0.0; // HA_MX Convection Coefficient times Area for the upper subzone (windows only)
92 : Real64 HAT_OC = 0.0; // HAT_OC Convection Coefficient times Area times Temperature for the lower subzone
93 : Real64 HAT_OCWin = 0.0; // HAT_OC Convection Coefficient times Area times Temperature for the lower subzone (windows only)
94 : Real64 HA_OC = 0.0; // HA_OC Convection Coefficient times Area for the lower subzone
95 : Real64 HA_OCWin = 0.0; // HA_OC Convection Coefficient times Area for the lower subzone (windows only)
96 : Real64 HAT_FLOOR = 0.0; // HAT_FLOOR Convection Coefficient times Area times Temperature for the floor(?) subzone
97 : Real64 HA_FLOOR = 0.0; // HA_FLOOR Convection Coefficient times Area for the floor(?) subzone
98 : Real64 HeightFloorSubzoneTop = 0.2; // Assumed thickness of floor subzone
99 : Real64 ThickOccupiedSubzoneMin = 0.2; // Minimum thickness of occupied subzone
100 : Real64 HeightIntMass = 0.0; // Height of internal mass surfaces, assumed vertical, cannot exceed ceiling height
101 : Real64 HeightIntMassDefault = 2.0; // Default height of internal mass surfaces
102 :
103 : bool MyOneTimeFlag = true;
104 : Array1D_bool MySizeFlag;
105 :
106 0 : void clear_state() override
107 : {
108 0 : this->MyOneTimeFlag = true;
109 0 : this->MySizeFlag.deallocate();
110 0 : }
111 :
112 : // Default Constructor
113 771 : UFADManagerData() = default;
114 : };
115 : } // namespace EnergyPlus
116 :
117 : #endif
|
