Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2023, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef WindowComplexManager_hh_INCLUDED
49 : #define WindowComplexManager_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1S.hh>
53 : #include <ObjexxFCL/Array2D.hh>
54 :
55 : // EnergyPlus Headers
56 : #include <EnergyPlus/Data/BaseData.hh>
57 : #include <EnergyPlus/DataBSDFWindow.hh>
58 : #include <EnergyPlus/DataVectorTypes.hh>
59 : #include <EnergyPlus/EnergyPlus.hh>
60 : #include <EnergyPlus/TARCOGGassesParams.hh>
61 : #include <EnergyPlus/TARCOGParams.hh>
62 :
63 : namespace EnergyPlus {
64 :
65 : // forward declaration
66 : struct EnergyPlusData;
67 :
68 : namespace WindowComplexManager {
69 :
70 : enum class RayIdentificationType
71 : {
72 : Invalid = -1,
73 : Front_Incident,
74 : Front_Transmitted,
75 : Front_Reflected,
76 : Back_Incident,
77 : Back_Transmitted,
78 : Back_Reflected,
79 : Num
80 : };
81 :
82 : // Using/Aliasing
83 : using DataBSDFWindow::BasisElemDescr;
84 : using DataBSDFWindow::BasisStruct;
85 : using DataBSDFWindow::BSDFDaylghtPosition;
86 : using DataBSDFWindow::BSDFGeomDescr;
87 : using DataBSDFWindow::BSDFStateDescr;
88 : using DataBSDFWindow::BSDFWindowGeomDescr;
89 : using DataBSDFWindow::BSDFWindowInputStruct;
90 : using DataVectorTypes::Vector;
91 :
92 : struct WindowIndex
93 : {
94 : // Members
95 : int NumStates; // No States for this window
96 : int SurfNo; // Surface number of window
97 : // Real64 Azimuth; // Window surface azimuth
98 : // Real64 Tilt; // Window surface tilt
99 :
100 : // Default Constructor
101 125 : WindowIndex() : NumStates(0)
102 : {
103 125 : }
104 : };
105 :
106 10 : struct WindowStateIndex
107 : {
108 : // Members
109 : int InitInc = 0; // Flag indicating initialization needed on Incoming basis
110 : int IncBasisIndx = 0; // Index of basis list entry for Incoming basis
111 : int CopyIncState = 0; // Pointer to state from which geometry can be copied (Incident)
112 : int InitTrn = 0; // Flag indicating initialization needed on Outgoing basis
113 : int TrnBasisIndx = 0; // Index of basis list entry for Outgoing basis
114 : int CopyTrnState = 0; // Pointer to state from which geometry can be copied (Outgoing)
115 : int Konst = 0; // Index of state descript in Construct array
116 : // INTEGER :: ThermConst !Index of state thermal description in Construct array
117 : };
118 :
119 : // Functions
120 :
121 : // void clear_state();
122 :
123 : void InitBSDFWindows(EnergyPlusData &state);
124 :
125 : void AllocateCFSStateHourlyData(EnergyPlusData &state,
126 : int const iSurf, // Surface number
127 : int const iState // Complex fenestration state number
128 : );
129 :
130 : void ExpandComplexState(EnergyPlusData &state,
131 : int const iSurf, // Surface number
132 : int const iConst // Construction number
133 : );
134 :
135 : void CheckCFSStates(EnergyPlusData &state, int const iSurf); // Surface number
136 :
137 : void InitComplexWindows(EnergyPlusData &state);
138 :
139 : void UpdateComplexWindows(EnergyPlusData &state);
140 :
141 : void CFSShadeAndBeamInitialization(EnergyPlusData &state,
142 : int const iSurf, // Window surface number
143 : int const iState // Window state number
144 : );
145 :
146 : void CalculateWindowBeamProperties(EnergyPlusData &state,
147 : int const ISurf, // Window surface number
148 : int const IState, // Window state number
149 : BSDFWindowGeomDescr const &Window, // Window Geometry
150 : BSDFGeomDescr const &Geom, // State Geometry
151 : BSDFStateDescr &State, // State Description
152 : int const Hour, // Hour number
153 : int const TS // Timestep number
154 : );
155 :
156 : void CalcStaticProperties(EnergyPlusData &state);
157 :
158 : void CalculateBasisLength(EnergyPlusData &state,
159 : BSDFWindowInputStruct const &Input, // BSDF data input struct for this construction
160 : int const IConst, // Construction number of input
161 : int &NBasis // Calculated Basis length
162 : );
163 :
164 : void ConstructBasis(EnergyPlusData &state,
165 : int const IConst, // Index for accessing Construct array
166 : BasisStruct &Basis);
167 :
168 : void FillBasisElement(EnergyPlusData &state,
169 : Real64 const Theta, // Central polar angle of element
170 : Real64 const Phi, // Central azimuthal angle of element
171 : int const Elem, // Index number of element in basis
172 : BasisElemDescr &BasisElem,
173 : Real64 const LowerTheta, // Lower edge of element (polar angle)
174 : Real64 const UpperTheta, // Upper edge of element (polar angle)
175 : Real64 const DPhi, // Width of element (azimuthal angle)
176 : DataBSDFWindow::Basis const InputType // Basis type
177 : );
178 :
179 : void SetupComplexWindowStateGeometry(EnergyPlusData &state,
180 : int const ISurf, // Surface number of the complex fenestration
181 : int const IState, // State number of the complex fenestration state
182 : int const IConst, // Pointer to construction for this state
183 : BSDFWindowGeomDescr &Window, // Window Geometry
184 : BSDFGeomDescr &Geom, // State Geometry
185 : BSDFStateDescr &State // State Description
186 : );
187 :
188 : void CalcWindowStaticProperties(EnergyPlusData &state,
189 : int const ISurf, // Surface number of the complex fenestration
190 : int const IState, // State number of the complex fenestration state
191 : BSDFWindowGeomDescr &Window, // Window Geometry
192 : BSDFGeomDescr &Geom, // State Geometry
193 : BSDFStateDescr &State // State Description
194 : );
195 :
196 : Real64 SkyWeight(Vector const &DirVec); // Direction of the element to be weighted
197 :
198 : Real64 SkyGndWeight(Vector const &PosVec); // x,y,z(=0) of ground intersection pt
199 :
200 : BSDFDaylghtPosition DaylghtAltAndAzimuth(Vector const &UnitVect); // vector which needs to be converted
201 :
202 : Vector WorldVectFromW6(EnergyPlusData &state,
203 : Real64 const Theta, // Polar angle in W6 Coords
204 : Real64 const Phi, // Azimuthal angle in W6 Coords
205 : const RayIdentificationType RadType, // Type of radiation: Front_Incident, etc.
206 : Real64 const Gamma, // Surface tilt angle, radians, world coordinate system
207 : Real64 const Alpha // Surface azimuth, radians, world coordinate system
208 : );
209 :
210 : int FindInBasis(EnergyPlusData &state,
211 : Vector const &RayToFind, // Ray vector direction in world CS
212 : const RayIdentificationType RadType, // Type of radiation: Front_Incident, etc.
213 : int const ISurf, // Window Surface number
214 : int const IState, // Complex Fenestration state number
215 : BasisStruct const &Basis, // Complex Fenestration basis root
216 : Real64 &Theta, // Theta value for ray
217 : Real64 &Phi // Phi value for ray
218 : );
219 :
220 : void W6CoordsFromWorldVect(EnergyPlusData &state,
221 : Vector const &RayVect, // Ray vector direction in world CS
222 : const RayIdentificationType RadType, // Type of radiation: Front_Incident, etc.
223 : Real64 const Gamma, // Surface tilt angle, world coordinate system
224 : Real64 const Alpha, // Surface azimuth, world coordinate system
225 : Real64 &Theta, // Polar angle in W6 Coords
226 : Real64 &Phi // Azimuthal angle in W6 Coords
227 : );
228 :
229 : void CalcComplexWindowThermal(EnergyPlusData &state,
230 : int const SurfNum, // Surface number
231 : int &ConstrNum, // Construction number
232 : Real64 const HextConvCoeff, // Outside air film conductance coefficient
233 : Real64 &SurfInsideTemp, // Inside window surface temperature
234 : Real64 &SurfOutsideTemp, // Outside surface temperature (C)
235 : Real64 &SurfOutsideEmiss,
236 : DataBSDFWindow::Condition const CalcCondition // Calucation condition (summer, winter or no condition)
237 : );
238 :
239 : // This function check if gas with molecular weight has already been feed into coefficients and
240 : // feed arrays
241 :
242 : void CheckGasCoefs(Real64 const currentWeight, int &indexNumber, Array1D<Real64> &wght, bool &feedData);
243 :
244 : int SearchAscTable(Real64 const y, // Value to be found in the table
245 : int const n, // Number of values in the table
246 : Array1S<Real64> const ytab // Table of values, monotonic, ascending order
247 : );
248 :
249 : //=================================================================================================
250 :
251 : } // namespace WindowComplexManager
252 :
253 771 : struct WindowComplexManagerData : BaseGlobalStruct
254 : {
255 :
256 : Real64 const sigma; // Stefan-Boltzmann constant
257 : Real64 const PressureDefault;
258 :
259 : int const Calculate_Geometry;
260 : int const Copy_Geometry;
261 :
262 : int const TmpLen; // Length increment of temporary arrays
263 :
264 : int NumComplexWind; // Total number of complex windows
265 :
266 : Array1D<DataBSDFWindow::BasisStruct> BasisList;
267 : EPVector<WindowComplexManager::WindowIndex> WindowList;
268 : Array2D<WindowComplexManager::WindowStateIndex> WindowStateList;
269 :
270 : bool InitComplexWindowsOnce = true; // Flag for insuring things happen once
271 : bool InitBSDFWindowsOnce = true;
272 : int NumBasis = 0; // Number of unique bases (No. in BasisList)
273 : int MatrixNo = 0; // Index of Basis matrix
274 :
275 : Array1D<Real64> gap = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of gap widths [m] {maxlay}
276 : Array1D<Real64> thick = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of glass thicknesses [m] {maxlay}
277 : Array1D<Real64> scon = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of conductivities of each glazing layer [W/m.K] {maxlay}
278 : Array1D<Real64> tir =
279 : Array1D<Real64>(TARCOGParams::maxlay * 2, 0.0); // Vector of IR transmittances of each layer {2*maxlay - 2 surfaces per layer}
280 : Array1D<Real64> emis =
281 : Array1D<Real64>(TARCOGParams::maxlay * 2, 0.0); // Vector of IR emittances of each surface {2*maxlay - 2 surfaces per layer}
282 : Array1D_int SupportPlr = Array1D_int(TARCOGParams::maxlay, 0); // Shows whether or not gap have support pillar
283 : // 0 - does not have support pillar
284 : // 1 - have support pillar
285 : Array1D<Real64> PillarSpacing = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Pillar spacing for each gap (used in case there is support pillar)
286 : Array1D<Real64> PillarRadius = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Pillar radius for each gap (used in case there is support pillar)
287 : Array1D<Real64> asol = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of Absorbed solar energy fractions for each layer {maxlay}
288 : Array1D<Real64> presure = Array1D<Real64>(TARCOGParams::maxlay + 1, 0.0); // Vector of gas pressures in gaps [N/m^2] {maxlay+1}
289 : Array1D<Real64> GapDefMax = Array1D<Real64>(TARCOGParams::maxlay - 1, 0.0); // Vector of gap widths in deflected state. It will be used as input
290 : // if CalcDeflection = 2. In case CalcDeflection = 1 it will return recalculated
291 : // gap widths. [m]
292 : Array1D<Real64> YoungsMod = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of Young's modulus. [m]
293 : Array1D<Real64> PoissonsRat = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of Poisson's Ratios. [m]
294 : Array1D<Real64> LayerDef = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of layers deflection. [m]
295 :
296 : Array2D_int iprop = Array2D_int(TARCOGGassesParams::maxgas, TARCOGParams::maxlay + 1, 1); // Matrix of gas codes - see above {maxgap x maxgas}
297 : Array2D<Real64> frct =
298 : Array2D<Real64>(TARCOGGassesParams::maxgas, TARCOGParams::maxlay + 1, 0.0); // Matrix of mass percentages in gap mixtures {maxgap x maxgas}
299 : Array2D<Real64> gcon = Array2D<Real64>(3, TARCOGGassesParams::maxgas, 0.0); // Matrix of constants for gas conductivity calc
300 : // (A, B, C for max of 10 gasses) {maxgas x 3}
301 : Array2D<Real64> gvis = Array2D<Real64>(3, TARCOGGassesParams::maxgas, 0.0); // Matrix of constants for gas dynamic viscosity calc
302 : // (A, B, C for max of 10 gasses) {maxgas x 3}
303 : Array2D<Real64> gcp = Array2D<Real64>(3, TARCOGGassesParams::maxgas, 0.0); // Matrix of constants for gas specific heat calc at constant pressure
304 : // (A, B, C for max of 10 gasses) {maxgas x 3}
305 : Array1D<Real64> wght = Array1D<Real64>(TARCOGGassesParams::maxgas, 0.0); // Vector of Molecular weights for gasses {maxgas}
306 : Array1D<Real64> gama = Array1D<Real64>(TARCOGGassesParams::maxgas, 0.0); // Vector of spefic heat ration for low pressure calc {maxgas}
307 : Array1D_int nmix = Array1D_int(TARCOGParams::maxlay + 1, 0); // Vector of number of gasses in gas mixture of each gap {maxlay+1}
308 : Array1D_int ibc = Array1D_int(2, 0); // Vector of boundary condition flags (ibc(1) - outdoor, ibc(2) - indoor)
309 : // 0 - h to be calculated;
310 : // 1 - combined film coefficient (h) prescribed;
311 : // 2 - convective film coefficient (hc) prescribed.
312 : // Also used in old algorithms for calculating h, accessible through
313 : // negative values for flags:
314 : // -1 - old SPC142 correlation
315 : // -2 - Klems-Yazdanian correlation (applicable to outdoor only)
316 : // -3 - Kimura correlation (applicable to outdoor only)
317 : Array1D<Real64> Atop = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector with areas of top openings - between SD layers and top of
318 : // glazing cavity, for each layer [m^2] {maxlay} *
319 : Array1D<Real64> Abot = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector with areas of bottom openings - between SD layers
320 : // and bottom of glazing cavity [m^2] {maxlay}
321 : Array1D<Real64> Al = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector with areas of left-hand side openings - between SD layers
322 : // and left end of glazing cavity [m^2] {maxlay}
323 : Array1D<Real64> Ar = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of areas of right-hand side openings - between SD layers
324 : // and right end of glazing cavity [m^2] {maxlay}
325 : Array1D<Real64> Ah = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of total areas of holes for each SD [m^2] {maxlay}
326 : Array1D<Real64> SlatThick = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Thickness of the slat material [m] {maxlay} **
327 : Array1D<Real64> SlatWidth = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Slat width [m] {maxlay}
328 : Array1D<Real64> SlatAngle = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Slat tilt angle [deg] {maxlay}
329 : Array1D<Real64> SlatCond = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Conductivity of the slat material [W/m.K] {maxlay}
330 : Array1D<Real64> SlatSpacing = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Distance between slats [m] {maxlay}
331 : Array1D<Real64> SlatCurve = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Curvature radius of the slat [m] {maxlay}
332 : Array1D<Real64> vvent = Array1D<Real64>(TARCOGParams::maxlay + 1, 0.0); // Vector of velocities for forced ventilation, for each gap, and for
333 : // outdoor and indoor environment [m/s] {maxlay+1} ***
334 : Array1D<Real64> tvent =
335 : Array1D<Real64>(TARCOGParams::maxlay + 1, 0.0); // Vector of temperatures of ventilation gas for forced ventilation, for each
336 : // gap, and for outdoor and indoor environment [K] {maxlay+1}
337 : Array1D<TARCOGParams::TARCOGLayerType> LayerType =
338 : Array1D<TARCOGParams::TARCOGLayerType>(TARCOGParams::maxlay, TARCOGParams::TARCOGLayerType::SPECULAR); // Glazing layer type flag {maxlay}:
339 : // 0 - Specular layer,
340 : // 1 - Venetian blind (SD)
341 : // 2 - Woven shade (SD) (not implemented)
342 : // 3 - Diffuse shade (not implemented)
343 : Array1D_int nslice = Array1D_int(TARCOGParams::maxlay, 0); // Vector of numbers of slices in a laminated glazing layers
344 : // (0 - monolithic layer) {maxlay}
345 : Array1D<Real64> LaminateA = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Left-hand side array for creating slice equations {maxlay}
346 : Array1D<Real64> LaminateB = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Right-hand side array for creating slice equations {maxlay}
347 : Array1D<Real64> sumsol = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Array of absorbed solar energy fractions for each laminated
348 : // glazing layer [W/m^2] {maxlay}
349 : Array1D<Real64> theta = Array1D<Real64>(TARCOGParams::maxlay * 2, 0.0); // Vector of average temperatures of glazing surfaces [K] {2*maxlay}
350 : Array1D<Real64> q = Array1D<Real64>(TARCOGParams::maxlay * 2 + 1, 0.0); // Vector of various heat fluxes [W/m^2] {2*maxlay+1},
351 : // depending on element index:
352 : // 1 = qout (heat flux from outer-most glazing surface to outdoor space)
353 : // 2*i = qpane(i) (heat flux through i-th glazing layer)
354 : // 2*i-1 = qgap(i) (heat flux from i-th glazing cavity to indoor-faced
355 : // surface of the adjacent glazing layer)
356 : // 2*nlayer+1 = qin (heat flux from indoor space to inner-most glazing
357 : // surface)
358 : Array1D<Real64> qprim = Array1D<Real64>(TARCOGParams::maxlay1, 0.0); // Vector of heat fluxes from the outdoor-faced surfaces of glazing layers
359 : // towards the adjacent glazing cavity [W/m2]
360 : Array1D<Real64> qv = Array1D<Real64>(TARCOGParams::maxlay1, 0.0); // Vector of heat fluxes to each gap by ventillation [W/m^2]
361 : Array1D<Real64> hcgap = Array1D<Real64>(TARCOGParams::maxlay1, 0.0); // Convective part of gap effective conductivity {maxlay}
362 : Array1D<Real64> hrgap = Array1D<Real64>(TARCOGParams::maxlay1, 0.0); // Radiative part of gap effective conductivity (including in and out)
363 : Array1D<Real64> hg = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Gas conductance of the glazing cavity
364 : // [W/m^2.K] - EN673 and ISO 10292 procedure
365 : Array1D<Real64> hr = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Radiation conductance of the glazing cavity
366 : // [W/m^2.K] - EN673 and ISO 10292 procedure
367 : Array1D<Real64> hs = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Thermal conductance of the glazing cavity
368 : // [W/m^2.K] - EN673 and ISO 10292 procedure
369 : Array1D<Real64> Ra = Array1D<Real64>(TARCOGParams::maxlay + 1, 0.0); // Vector of Rayleigh numbers, for each gap {maxlay}
370 : Array1D<Real64> Nu = Array1D<Real64>(TARCOGParams::maxlay + 1, 0.0); // Vector of Nusselt numbers, for each gap {maxlay}
371 : Array1D<Real64> Keff = Array1D<Real64>(TARCOGParams::maxlay, 0.0); // Vector of keff values for gaps [W/m.K] {maxlay}
372 : Array1D<Real64> ShadeGapKeffConv = Array1D<Real64>(TARCOGParams::maxlay - 1, 0.0); // Vector of convective keff values for areas above/below
373 : // SD layers [W/m.K] {maxlay-1}
374 : Array1D<Real64> deltaTemp = Array1D<Real64>(100, 0.0);
375 : Array1D_int iMinDT = Array1D_int(1, 0);
376 : Array1D_int IDConst = Array1D_int(100, 0);
377 :
378 0 : void clear_state() // override
379 : {
380 0 : this->NumComplexWind = 0;
381 0 : this->BasisList.deallocate();
382 0 : this->WindowList.deallocate();
383 0 : this->WindowStateList.deallocate();
384 0 : this->InitComplexWindowsOnce = true;
385 0 : this->InitBSDFWindowsOnce = true;
386 0 : this->NumBasis = 0;
387 0 : this->MatrixNo = 0;
388 0 : this->LayerType = Array1D<TARCOGParams::TARCOGLayerType>(TARCOGParams::maxlay, TARCOGParams::TARCOGLayerType::SPECULAR);
389 0 : }
390 :
391 : // Default Constructor
392 771 : WindowComplexManagerData()
393 771 : : sigma(5.6697e-8), PressureDefault(101325.0), Calculate_Geometry(1), Copy_Geometry(2), TmpLen(20), NumComplexWind(0), NumBasis(0),
394 771 : MatrixNo(0)
395 : {
396 771 : }
397 : };
398 :
399 : } // namespace EnergyPlus
400 :
401 : #endif
|
