Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois, 2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory 3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge 4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other 5 : // contributors. All rights reserved. 6 : // 7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the 8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been 9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable, 10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare 11 : // derivative works, and perform publicly and display publicly, and to permit others to do so. 12 : // 13 : // Redistribution and use in source and binary forms, with or without modification, are permitted 14 : // provided that the following conditions are met: 15 : // 16 : // (1) Redistributions of source code must retain the above copyright notice, this list of 17 : // conditions and the following disclaimer. 18 : // 19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of 20 : // conditions and the following disclaimer in the documentation and/or other materials 21 : // provided with the distribution. 22 : // 23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory, 24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be 25 : // used to endorse or promote products derived from this software without specific prior 26 : // written permission. 27 : // 28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form 29 : // without changes from the version obtained under this License, or (ii) Licensee makes a 30 : // reference solely to the software portion of its product, Licensee must refer to the 31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee 32 : // obtained under this License and may not use a different name for the software. Except as 33 : // specifically required in this Section (4), Licensee shall not use in a company name, a 34 : // product name, in advertising, publicity, or other promotional activities any name, trade 35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly 36 : // similar designation, without the U.S. Department of Energy's prior written consent. 37 : // 38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR 39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 46 : // POSSIBILITY OF SUCH DAMAGE. 47 : 48 : #ifndef CoolTower_hh_INCLUDED 49 : #define CoolTower_hh_INCLUDED 50 : 51 : // ObjexxFCL Headers 52 : #include <ObjexxFCL/Array1D.hh> 53 : 54 : // EnergyPlus Headers 55 : #include <EnergyPlus/Data/BaseData.hh> 56 : #include <EnergyPlus/DataGlobals.hh> 57 : #include <EnergyPlus/EnergyPlus.hh> 58 : 59 : namespace EnergyPlus { 60 : 61 : // Forward declarations 62 : struct EnergyPlusData; 63 : 64 : namespace CoolTower { 65 : 66 : enum class FlowCtrl 67 : { 68 : Invalid = -1, 69 : FlowSchedule, 70 : WindDriven, 71 : Num 72 : }; 73 : 74 : enum class WaterSupplyMode 75 : { 76 : Invalid = -1, 77 : FromMains, 78 : FromTank, 79 : Num 80 : }; 81 : 82 : struct CoolTowerParams 83 : { 84 : // Members 85 : std::string Name; // The component name 86 : std::string CompType; // Type of component 87 : std::string Schedule; // Available schedule 88 : int SchedPtr = 0; // Index to schedule 89 : int ZonePtr = 0; // Index to zone 90 : int spacePtr = 0; // Index to space (if applicable) 91 : int PumpSchedPtr = 0; // Index to schedule for water pump 92 : FlowCtrl FlowCtrlType = FlowCtrl::Invalid; // Type of cooltower operation 93 : WaterSupplyMode CoolTWaterSupplyMode = WaterSupplyMode::FromMains; // Type of water source 94 : std::string CoolTWaterSupplyName; // Name of water source 95 : int CoolTWaterSupTankID; // Index to water storage tank 96 : int CoolTWaterTankDemandARRID; // Index to water storage demand 97 : Real64 TowerHeight = 0.0; // Effective cooltower height in m 98 : Real64 OutletArea = 0.0; // Outlet area where conditioned air comes in m2 99 : Real64 OutletVelocity = 0.0; // Outlet velocity of the cooltower in m/s 100 : Real64 MaxAirVolFlowRate = 0.0; // Maximum allowable airflow in m3/s 101 : Real64 AirMassFlowRate = 0.0; // Air mass flow rate in kg/s 102 : Real64 CoolTAirMass = 0.0; // Air mass in kg 103 : Real64 MinZoneTemp = 0.0; // Lower temperature limit to prevent over cooling in C 104 : Real64 FracWaterLoss = 0.0; // Fraction of estimated blowdown and drift water 105 : Real64 FracFlowSched = 0.0; // Fraction of airflow loss 106 : Real64 MaxWaterFlowRate = 0.0; // Maximum limit of water flow rate in m3/s 107 : Real64 ActualWaterFlowRate = 0.0; // Actual water mass flow rate in m3/s 108 : Real64 RatedPumpPower = 0.0; // Rated power consumption for water pump serving the cooltower in watts 109 : Real64 SenHeatLoss = 0.0; // Sensible heat loss in Joules 110 : Real64 SenHeatPower = 0.0; // Sensible heat loss rate in watts 111 : Real64 LatHeatLoss = 0.0; // Latent heat loss in Joules 112 : Real64 LatHeatPower = 0.0; // Latent heat loss rate in watts 113 : Real64 AirVolFlowRate = 0.0; // Air flow rate in m3/s 114 : Real64 AirVolFlowRateStd = 0.0; // Air flow rate in m3/s at standard conditions 115 : Real64 CoolTAirVol = 0.0; // Air volume in m3 116 : Real64 ActualAirVolFlowRate = 0.0; // Actual air flow rate in m3/s 117 : Real64 InletDBTemp = 0.0; // Outdoor dry bulb temperature in C 118 : Real64 InletWBTemp = 0.0; // Outdoor wet bulb temperature in C 119 : Real64 InletHumRat = 0.0; // Outdoor humidity ratio 120 : Real64 OutletTemp = 0.0; // Dry bulb temperature at cooltower exit in C 121 : Real64 OutletHumRat = 0.0; // Humidity ratio at cooltower exit 122 : Real64 CoolTWaterConsumpRate = 0.0; // Total water consumption during the processes in m3/s 123 : Real64 CoolTWaterStarvMakeupRate = 0.0; // Water provided from the mains (m3/s) 124 : Real64 CoolTWaterStarvMakeup = 0.0; // Water provided from the mains 125 : Real64 CoolTWaterConsump = 0.0; // Total water consumption in m3 126 : Real64 PumpElecPower = 0.0; // Pump power in watts 127 : Real64 PumpElecConsump = 0.0; // Pump energy consumption in Joules 128 : }; 129 : 130 : void ManageCoolTower(EnergyPlusData &state); 131 : 132 : void GetCoolTower(EnergyPlusData &state); 133 : 134 : void CalcCoolTower(EnergyPlusData &state); 135 : 136 : void UpdateCoolTower(EnergyPlusData &state); 137 : 138 : void ReportCoolTower(EnergyPlusData &state); 139 : 140 : } // namespace CoolTower 141 : 142 : struct CoolTowerData : BaseGlobalStruct 143 : { 144 : 145 : bool GetInputFlag = true; 146 : Array1D<CoolTower::CoolTowerParams> CoolTowerSys; 147 : 148 796 : void init_state([[maybe_unused]] EnergyPlusData &state) 149 : { 150 796 : } 151 : 152 0 : void clear_state() override 153 : { 154 0 : new (this) CoolTowerData(); 155 0 : } 156 : }; 157 : 158 : } // namespace EnergyPlus 159 : 160 : #endif