Line data    Source code

       1             : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
       2             : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
       3             : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
       4             : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
       5             : // contributors. All rights reserved.
       6             : //
       7             : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
       8             : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
       9             : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
      10             : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
      11             : // derivative works, and perform publicly and display publicly, and to permit others to do so.
      12             : //
      13             : // Redistribution and use in source and binary forms, with or without modification, are permitted
      14             : // provided that the following conditions are met:
      15             : //
      16             : // (1) Redistributions of source code must retain the above copyright notice, this list of
      17             : //     conditions and the following disclaimer.
      18             : //
      19             : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
      20             : //     conditions and the following disclaimer in the documentation and/or other materials
      21             : //     provided with the distribution.
      22             : //
      23             : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
      24             : //     the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
      25             : //     used to endorse or promote products derived from this software without specific prior
      26             : //     written permission.
      27             : //
      28             : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
      29             : //     without changes from the version obtained under this License, or (ii) Licensee makes a
      30             : //     reference solely to the software portion of its product, Licensee must refer to the
      31             : //     software as "EnergyPlus version X" software, where "X" is the version number Licensee
      32             : //     obtained under this License and may not use a different name for the software. Except as
      33             : //     specifically required in this Section (4), Licensee shall not use in a company name, a
      34             : //     product name, in advertising, publicity, or other promotional activities any name, trade
      35             : //     name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
      36             : //     similar designation, without the U.S. Department of Energy's prior written consent.
      37             : //
      38             : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
      39             : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
      40             : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
      41             : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
      42             : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
      43             : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
      44             : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
      45             : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
      46             : // POSSIBILITY OF SUCH DAMAGE.
      47             : 
      48             : #ifndef DataMoistureBalance_hh_INCLUDED
      49             : #define DataMoistureBalance_hh_INCLUDED
      50             : 
      51             : // ObjexxFCL Headers
      52             : #include <ObjexxFCL/Array1D.hh>
      53             : #include <ObjexxFCL/Array2D.hh>
      54             : #include <ObjexxFCL/Array3D.hh>
      55             : #include <ObjexxFCL/Array4D.hh>
      56             : 
      57             : // EnergyPlus Headers
      58             : #include <EnergyPlus/Data/BaseData.hh>
      59             : #include <EnergyPlus/EnergyPlus.hh>
      60             : 
      61             : namespace EnergyPlus {
      62             : 
      63             : struct MoistureBalanceData : BaseGlobalStruct
      64             : {
      65             :     // This is more or less the traditional value from BLAST.
      66             :     // static constexpr Real64 Lam = 2500000.0; // heat of adsorption for building materials
      67             :     // Public Variables that will also be used in the Moisture Surface Balance
      68             :     Array3D<Real64> FluxH; // transfer function coeff for calculating the CPF Flux history term
      69             :     Array4D<Real64> Icoef; // transfer function coeff for calculating the CPF history term
      70             :     Array2D<Real64> DiffC; // Thermal Diffusivity in combined potential formulation (CPF)
      71             :     // for each equation
      72             :     Array2D<Real64> mtinc; // # of Moisture transfer function time increment for each equation
      73             :     Array1D<Real64> S1;    // Thermal Diffusivity in combined potential formulation (CPF)
      74             :     // for each equation
      75             :     Array1D<Real64> R2; // Thermal Diffusivity in combined potential formulation (CPF)
      76             :     // for each equation
      77             :     Array1D<Real64> TempOutsideAirFD; // Temperature outside air for the FD surface
      78             : 
      79             :     Array2D_int mhstry; // # of FD History terms for each equation
      80             :     Array1D_int CMTF;   // Type of material layer
      81             :     Array2D_int Nmrf;   // # of Moisture Response Factors for CPF Solution
      82             : 
      83             :     // variables used for MTF moisture implementation
      84             :     Array1D<Real64> RhoVaporAirOut; // Vapor Density outside surface
      85             :     Array1D<Real64> RhoVaporAirIn;  // Vapor Density inside surface
      86             :     Array1D<Real64> HConvExtFD;     // thermal convection coefficient outside surface
      87             :     Array1D<Real64> HMassConvExtFD; // mass convection coefficient outside surface
      88             :     Array1D<Real64> HConvInFD;      // thermal convection coefficient inside surface
      89             :     Array1D<Real64> HMassConvInFD;  // mass convection coefficient inside surface
      90             :     Array1D<Real64> RhoVaporSurfIn; // Vapor Density inside surface
      91             :     Array1D<Real64> HSkyFD;         // Sky Convection Coefficient
      92             :     Array1D<Real64> HGrndFD;        // Ground Convection Coefficient
      93             :     Array1D<Real64> HAirFD;         // Air Convection Coefficient
      94             : 
      95         796 :     void init_state([[maybe_unused]] EnergyPlusData &state)
      96             :     {
      97         796 :     }
      98             : 
      99           0 :     void clear_state() override
     100             :     {
     101           0 :         new (this) MoistureBalanceData();
     102           0 :     }
     103             : };
     104             : 
     105             : } // namespace EnergyPlus
     106             : 
     107             : #endif