Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef PlantManager_hh_INCLUDED
49 : #define PlantManager_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 : #include <EnergyPlus/Plant/DataPlant.hh>
59 :
60 : namespace EnergyPlus {
61 :
62 : // Forward declarations
63 : struct EnergyPlusData;
64 :
65 : namespace PlantManager {
66 :
67 : void ManagePlantLoops(EnergyPlusData &state,
68 : bool FirstHVACIteration,
69 : bool &SimAirLoops, // True when the air loops need to be (re)simulated
70 : bool &SimZoneEquipment, // True when zone equipment components need to be (re)simulated
71 : bool &SimNonZoneEquipment, // True when non-zone equipment components need to be (re)simulated
72 : bool &SimPlantLoops, // True when some part of Plant needs to be (re)simulated
73 : bool &SimElecCircuits // True when electric circuits need to be (re)simulated
74 : );
75 :
76 : void GetPlantLoopData(EnergyPlusData &state);
77 :
78 : void GetPlantInput(EnergyPlusData &state);
79 :
80 : void SetupReports(EnergyPlusData &state);
81 :
82 : void fillPlantCondenserTopology(EnergyPlusData &state, DataPlant::PlantLoopData &thisLoop, int &rowCounter);
83 :
84 : // void fillPlantToplogyRow(EnergyPlusData &state,
85 : // const std::string_view &compName,
86 : // const std::string_view &compType,
87 : // const std::string_view &side,
88 : // const std::string_view &parentType,
89 : // const std::string_view &parentName,
90 : // const std::string_view &fluidName,
91 : // const int reportOffset);
92 :
93 : void fillPlantToplogySplitterRow2(EnergyPlusData &state,
94 : const std::string_view &loopType,
95 : const std::string_view &loopName,
96 : const std::string_view &side,
97 : const std::string_view &splitterName,
98 : int &rowCounter);
99 :
100 : void fillPlantToplogyMixerRow2(EnergyPlusData &state,
101 : const std::string_view &loopType,
102 : const std::string_view &loopName,
103 : const std::string_view &side,
104 : const std::string_view &mixerName,
105 : int &rowCounter);
106 :
107 : void fillPlantToplogyComponentRow2(EnergyPlusData &state,
108 : const std::string_view &loopType,
109 : const std::string_view &loopName,
110 : const std::string_view &side,
111 : const std::string_view &branchName,
112 : const std::string_view &compType,
113 : const std::string_view &compName,
114 : int &rowCounter);
115 :
116 : void InitializeLoops(EnergyPlusData &state,
117 : bool FirstHVACIteration); // true if first iteration of the simulation
118 :
119 : void ReInitPlantLoopsAtFirstHVACIteration(EnergyPlusData &state);
120 :
121 : void UpdateNodeThermalHistory(EnergyPlusData &state);
122 :
123 : void CheckPlantOnAbort(EnergyPlusData &state);
124 :
125 : void InitOneTimePlantSizingInfo(EnergyPlusData &state, int LoopNum); // loop being initialized for sizing
126 :
127 : void SizePlantLoop(EnergyPlusData &state,
128 : int LoopNum, // Supply side loop being simulated
129 : bool OkayToFinish);
130 :
131 : void ResizePlantLoopLevelSizes(EnergyPlusData &state, int LoopNum);
132 :
133 : void SetupInitialPlantCallingOrder(EnergyPlusData &state);
134 :
135 : void RevisePlantCallingOrder(EnergyPlusData &state);
136 :
137 : int FindLoopSideInCallingOrder(EnergyPlusData &state, int LoopNum, DataPlant::LoopSideLocation LoopSide);
138 :
139 : void SetupBranchControlTypes(EnergyPlusData &state);
140 :
141 : void CheckIfAnyPlant(EnergyPlusData &state);
142 :
143 : void CheckOngoingPlantWarnings(EnergyPlusData &state);
144 :
145 : struct EmptyPlantComponent : PlantComponent
146 : {
147 : // this is for purely air side equipment or similar that dont need anything at all done on plant for now
148 : // this could be a placeholder until those components are more integrated with plant side calcs.
149 154469787 : void simulate([[maybe_unused]] EnergyPlusData &state,
150 : [[maybe_unused]] const PlantLocation &calledFromLocation,
151 : [[maybe_unused]] bool FirstHVACIteration,
152 : [[maybe_unused]] Real64 &CurLoad,
153 : [[maybe_unused]] bool RunFlag) override
154 : {
155 : // this is empty on purpose
156 154469787 : }
157 :
158 : void oneTimeInit(EnergyPlusData &state) override;
159 :
160 : void oneTimeInit_new(EnergyPlusData &state) override;
161 : };
162 :
163 : } // namespace PlantManager
164 :
165 : struct PlantMgrData : BaseGlobalStruct
166 : {
167 :
168 : bool GetCompSizFac = true;
169 : bool SupplyEnvrnFlag = true;
170 : bool MySetPointCheckFlag = true;
171 : Array1D_bool PlantLoopSetPointInitFlag;
172 : bool MyEnvrnFlag = true;
173 : int OtherLoopCallingIndex = 0;
174 : int OtherLoopDemandSideCallingIndex = 0;
175 : int NewOtherDemandSideCallingIndex = 0;
176 : int newCallingIndex = 0;
177 : PlantManager::EmptyPlantComponent dummyPlantComponent;
178 :
179 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override
180 : {
181 796 : }
182 :
183 0 : void clear_state() override
184 : {
185 0 : this->GetCompSizFac = true;
186 0 : this->SupplyEnvrnFlag = true;
187 0 : this->MySetPointCheckFlag = true;
188 0 : this->PlantLoopSetPointInitFlag.clear();
189 0 : this->MyEnvrnFlag = true;
190 0 : this->OtherLoopCallingIndex = 0;
191 0 : this->OtherLoopDemandSideCallingIndex = 0;
192 0 : this->NewOtherDemandSideCallingIndex = 0;
193 0 : this->newCallingIndex = 0;
194 0 : this->dummyPlantComponent = {};
195 0 : }
196 : };
197 :
198 : } // namespace EnergyPlus
199 :
200 : #endif
|
