Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois, 2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory 3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge 4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other 5 : // contributors. All rights reserved. 6 : // 7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the 8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been 9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable, 10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare 11 : // derivative works, and perform publicly and display publicly, and to permit others to do so. 12 : // 13 : // Redistribution and use in source and binary forms, with or without modification, are permitted 14 : // provided that the following conditions are met: 15 : // 16 : // (1) Redistributions of source code must retain the above copyright notice, this list of 17 : // conditions and the following disclaimer. 18 : // 19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of 20 : // conditions and the following disclaimer in the documentation and/or other materials 21 : // provided with the distribution. 22 : // 23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory, 24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be 25 : // used to endorse or promote products derived from this software without specific prior 26 : // written permission. 27 : // 28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form 29 : // without changes from the version obtained under this License, or (ii) Licensee makes a 30 : // reference solely to the software portion of its product, Licensee must refer to the 31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee 32 : // obtained under this License and may not use a different name for the software. Except as 33 : // specifically required in this Section (4), Licensee shall not use in a company name, a 34 : // product name, in advertising, publicity, or other promotional activities any name, trade 35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly 36 : // similar designation, without the U.S. Department of Energy's prior written consent. 37 : // 38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR 39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 46 : // POSSIBILITY OF SUCH DAMAGE. 47 : 48 : #ifndef DataBranchNodeConnections_hh_INCLUDED 49 : #define DataBranchNodeConnections_hh_INCLUDED 50 : 51 : // ObjexxFCL Headers 52 : #include <ObjexxFCL/Array1D.hh> 53 : 54 : // EnergyPlus Headers 55 : #include <EnergyPlus/Data/BaseData.hh> 56 : #include <EnergyPlus/DataGlobals.hh> 57 : #include <EnergyPlus/EPVector.hh> 58 : #include <EnergyPlus/EnergyPlus.hh> 59 : #include <EnergyPlus/NodeInputManager.hh> 60 : 61 : namespace EnergyPlus { 62 : 63 : namespace DataBranchNodeConnections { 64 : 65 : struct ComponentListData 66 : { 67 : // Members 68 : // std::string ParentCType; // Parent Object Type (Cannot be SPLITTER or MIXER) 69 : DataLoopNode::ConnectionObjectType ParentObjectType = DataLoopNode::ConnectionObjectType::Invalid; 70 : std::string ParentCName; // Parent Object Name 71 : // std::string CType; // Component Type (Cannot be SPLITTER or MIXER) 72 : DataLoopNode::ConnectionObjectType ComponentObjectType = DataLoopNode::ConnectionObjectType::Invalid; 73 : std::string CName; // Component Name 74 : std::string InletNodeName; // Inlet Node ID 75 : std::string OutletNodeName; // Outlet Node ID 76 : std::string Description; // Description of Component List Type 77 : }; 78 : 79 : struct NodeConnectionDef 80 : { 81 : // Members 82 : int NodeNumber = 0; // Node number of this node connection 83 : std::string NodeName; // Node Name of this node connection 84 : DataLoopNode::ConnectionObjectType ObjectType = DataLoopNode::ConnectionObjectType::Invalid; // Object/Component Type of this node connection 85 : std::string ObjectName; // Name of the Object/Component Type of this node connection 86 : DataLoopNode::ConnectionType ConnectionType = 87 : DataLoopNode::ConnectionType::Invalid; // Connection Type (must be valid) for this node connection 88 : NodeInputManager::CompFluidStream FluidStream = NodeInputManager::CompFluidStream::Invalid; // Fluid Stream for this node connection 89 : bool ObjectIsParent = false; // Indicator whether the object is a parent or not 90 : }; 91 : 92 : struct ParentListData 93 : { 94 : // Members 95 : DataLoopNode::ConnectionObjectType ComponentType = 96 : DataLoopNode::ConnectionObjectType::Invalid; // Component Type (Cannot be SPLITTER or MIXER) 97 : std::string ComponentName; // Component Name 98 : std::string InletNodeName; // Inlet Node ID 99 : std::string OutletNodeName; // Outlet Node ID 100 : std::string Description; // Description of Component List Type 101 : }; 102 : 103 : struct EqNodeConnectionDef 104 : { 105 : // Members 106 : std::string NodeName; // Node Name of this node connection 107 : DataLoopNode::ConnectionObjectType ObjectType = DataLoopNode::ConnectionObjectType::Invalid; // Object/Component Type of this node connection 108 : std::string ObjectName; // Name of the Object/Component Type of this node connection 109 : std::string InputFieldName; // Input Field Name for this connection 110 : DataLoopNode::ConnectionType ConnectionType = 111 : DataLoopNode::ConnectionType::Invalid; // Connection Type (must be valid) for this node connection 112 : }; 113 : 114 : } // namespace DataBranchNodeConnections 115 : 116 : struct BranchNodeConnectionsData : BaseGlobalStruct 117 : { 118 : 119 : int NumCompSets = 0; // Number of Component Sets found in branches 120 : int NumNodeConnectionErrors = 0; // Count of node connection errors 121 : int NumOfNodeConnections = 0; 122 : int MaxNumOfNodeConnections = 0; 123 : int NumOfActualParents = 0; 124 : int NumOfAirTerminalNodes = 0; 125 : int MaxNumOfAirTerminalNodes = 0; 126 : 127 : EPVector<DataBranchNodeConnections::ComponentListData> CompSets; 128 : EPVector<DataBranchNodeConnections::ParentListData> ParentNodeList; 129 : EPVector<DataBranchNodeConnections::NodeConnectionDef> NodeConnections; 130 : EPVector<DataBranchNodeConnections::EqNodeConnectionDef> AirTerminalNodeConnections; 131 : Array1D_bool NonConnectedNodes; 132 : 133 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override 134 : { 135 796 : } 136 : 137 0 : void clear_state() override 138 : { 139 0 : new (this) BranchNodeConnectionsData(); 140 0 : } 141 : }; 142 : 143 : } // namespace EnergyPlus 144 : 145 : #endif