Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : // ObjexxFCL Headers
49 : #include <ObjexxFCL/string.functions.hh>
50 :
51 : // EnergyPlus Headers
52 : #include <EnergyPlus/Data/EnergyPlusData.hh>
53 : #include <EnergyPlus/DataOutputs.hh>
54 : #include <EnergyPlus/UtilityRoutines.hh>
55 :
56 : namespace EnergyPlus::DataOutputs {
57 :
58 : // Module containing the data and routines dealing with prescanning for
59 : // requested output variables to limit the number being processed in OutputProcessor
60 : // Also any input counts (such as autosize counts/records that are used
61 : // by later program modules.
62 :
63 : // MODULE INFORMATION:
64 : // AUTHOR Linda Lawrie
65 : // DATE WRITTEN July 2010
66 : // MODIFIED April 2011; to include autosize counts
67 : // RE-ENGINEERED na
68 :
69 : // PURPOSE OF THIS MODULE:
70 : // The module contains structure for output variables that are used in a small number of modules.
71 :
72 : // MODULE PARAMETER DEFINITIONS:
73 : Array1D_string const MonthlyNamedReports(NumMonthlyReports,
74 : {"ZONECOOLINGSUMMARYMONTHLY",
75 : "ZONEHEATINGSUMMARYMONTHLY",
76 : "ZONEELECTRICSUMMARYMONTHLY",
77 : "SPACEGAINSMONTHLY",
78 : "PEAKSPACEGAINSMONTHLY",
79 : "SPACEGAINCOMPONENTSATCOOLINGPEAKMONTHLY",
80 : "ENERGYCONSUMPTIONELECTRICITYNATURALGASMONTHLY",
81 : "ENERGYCONSUMPTIONELECTRICITYGENERATEDPROPANEMONTHLY",
82 : "ENERGYCONSUMPTIONDIESELFUELOILMONTHLY",
83 : "ENERGYCONSUMPTIONDISTRICTHEATINGCOOLINGMONTHLY",
84 : "ENERGYCONSUMPTIONCOALGASOLINEMONTHLY",
85 : "ENERGYCONSUMPTIONOTHERFUELSMONTHLY",
86 : "ENDUSEENERGYCONSUMPTIONELECTRICITYMONTHLY",
87 : "ENDUSEENERGYCONSUMPTIONNATURALGASMONTHLY",
88 : "ENDUSEENERGYCONSUMPTIONDIESELMONTHLY",
89 : "ENDUSEENERGYCONSUMPTIONFUELOILMONTHLY",
90 : "ENDUSEENERGYCONSUMPTIONCOALMONTHLY",
91 : "ENDUSEENERGYCONSUMPTIONPROPANEMONTHLY",
92 : "ENDUSEENERGYCONSUMPTIONGASOLINEMONTHLY",
93 : "ENDUSEENERGYCONSUMPTIONOTHERFUELSMONTHLY",
94 : "PEAKENERGYENDUSEELECTRICITYPART1MONTHLY",
95 : "PEAKENERGYENDUSEELECTRICITYPART2MONTHLY",
96 : "ELECTRICCOMPONENTSOFPEAKDEMANDMONTHLY",
97 : "PEAKENERGYENDUSENATURALGASMONTHLY",
98 : "PEAKENERGYENDUSEDIESELMONTHLY",
99 : "PEAKENERGYENDUSEFUELOILMONTHLY",
100 : "PEAKENERGYENDUSECOALMONTHLY",
101 : "PEAKENERGYENDUSEPROPANEMONTHLY",
102 : "PEAKENERGYENDUSEGASOLINEMONTHLY",
103 : "PEAKENERGYENDUSEOTHERFUELSMONTHLY",
104 : "SETPOINTSNOTMETWITHTEMPERATURESMONTHLY",
105 : "COMFORTREPORTSIMPLE55MONTHLY",
106 : "UNGLAZEDTRANSPIREDSOLARCOLLECTORSUMMARYMONTHLY",
107 : "OCCUPANTCOMFORTDATASUMMARYMONTHLY",
108 : "CHILLERREPORTMONTHLY",
109 : "TOWERREPORTMONTHLY",
110 : "BOILERREPORTMONTHLY",
111 : "DXREPORTMONTHLY",
112 : "WINDOWREPORTMONTHLY",
113 : "WINDOWENERGYREPORTMONTHLY",
114 : "WINDOWZONESUMMARYMONTHLY",
115 : "WINDOWENERGYZONESUMMARYMONTHLY",
116 : "AVERAGEOUTDOORCONDITIONSMONTHLY",
117 : "OUTDOORCONDITIONSMAXIMUMDRYBULBMONTHLY",
118 : "OUTDOORCONDITIONSMINIMUMDRYBULBMONTHLY",
119 : "OUTDOORCONDITIONSMAXIMUMWETBULBMONTHLY",
120 : "OUTDOORCONDITIONSMAXIMUMDEWPOINTMONTHLY",
121 : "OUTDOORGROUNDCONDITIONSMONTHLY",
122 : "WINDOWACREPORTMONTHLY",
123 : "WATERHEATERREPORTMONTHLY",
124 : "GENERATORREPORTMONTHLY",
125 : "DAYLIGHTINGREPORTMONTHLY",
126 : "COILREPORTMONTHLY",
127 : "PLANTLOOPDEMANDREPORTMONTHLY",
128 : "FANREPORTMONTHLY",
129 : "PUMPREPORTMONTHLY",
130 : "CONDLOOPDEMANDREPORTMONTHLY",
131 : "ZONETEMPERATUREOSCILLATIONREPORTMONTHLY",
132 : "AIRLOOPSYSTEMENERGYANDWATERUSEMONTHLY",
133 : "AIRLOOPSYSTEMCOMPONENTLOADSMONTHLY",
134 : "AIRLOOPSYSTEMCOMPONENTENERGYUSEMONTHLY",
135 : "MECHANICALVENTILATIONLOADSMONTHLY",
136 : "HEATEMISSIONSREPORTMONTHLY"});
137 :
138 58787 : bool isKeyRegexLike(std::string_view key)
139 : {
140 58787 : if (key == "*") {
141 28912 : return false;
142 : }
143 :
144 29875 : return key.find_first_of("*+?()|[]\\.") != std::string_view::npos;
145 : }
146 :
147 37245 : OutputReportingVariables::OutputReportingVariables(EnergyPlusData &state, std::string const &KeyValue, std::string const &VariableName)
148 37245 : : key(KeyValue), variableName(VariableName), is_simple_string(!DataOutputs::isKeyRegexLike(KeyValue))
149 : {
150 :
151 37245 : if (is_simple_string) {
152 37245 : return;
153 : }
154 0 : pattern = std::make_shared<RE2>(KeyValue);
155 0 : case_insensitive_pattern = std::make_shared<RE2>("(?i)" + KeyValue);
156 0 : if (!pattern->ok()) {
157 0 : ShowSevereError(state, format("Regular expression \"{}\" for variable name \"{}\" in input file is incorrect", KeyValue, VariableName));
158 0 : ShowContinueError(state, pattern->error());
159 0 : ShowFatalError(state, "Error found in regular expression. Previous error(s) cause program termination.");
160 : }
161 0 : }
162 :
163 6401529 : bool FindItemInVariableList(const EnergyPlusData &state, std::string_view const KeyedValue, std::string_view const VariableName)
164 : {
165 :
166 : // FUNCTION INFORMATION:
167 : // AUTHOR Linda Lawrie
168 : // DATE WRITTEN July 2010
169 : // MODIFIED December 2016
170 :
171 : // PURPOSE OF THIS FUNCTION:
172 : // This function looks up a key and variable name value and determines if they are
173 : // in the list of required variables for a simulation.
174 :
175 6401529 : auto const found_variable = state.dataOutput->OutputVariablesForSimulation.find(VariableName);
176 6401529 : if (found_variable == state.dataOutput->OutputVariablesForSimulation.end()) return false;
177 :
178 208306 : auto found_key = found_variable->second.find(KeyedValue);
179 208306 : if (found_key != found_variable->second.end()) return true;
180 :
181 200352 : found_key = found_variable->second.find("*");
182 200352 : if (found_key != found_variable->second.end()) return true;
183 :
184 1094144 : for (auto it = found_variable->second.begin(); it != found_variable->second.end(); ++it) {
185 1012070 : if (equali(KeyedValue, it->second.key)) return true;
186 1012070 : if (it->second.is_simple_string) continue;
187 0 : if ((it->second.pattern != nullptr && RE2::FullMatch(std::string{KeyedValue}, *it->second.pattern)) || // match against regex as written
188 0 : (it->second.case_insensitive_pattern != nullptr &&
189 0 : RE2::FullMatch(std::string{KeyedValue}, *it->second.case_insensitive_pattern)) // attempt case-insensitive regex comparison
190 : ) {
191 0 : return true;
192 : }
193 82074 : }
194 82074 : return false;
195 6401529 : }
196 :
197 : } // namespace EnergyPlus::DataOutputs
|
