Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef EMSManager_hh_INCLUDED
49 : #define EMSManager_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Optional.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobalConstants.hh>
57 : #include <EnergyPlus/DataHVACGlobals.hh>
58 : #include <EnergyPlus/EnergyPlus.hh>
59 : #include <EnergyPlus/OutputProcessor.hh>
60 :
61 : namespace EnergyPlus {
62 :
63 : // Forward declarations
64 : struct EnergyPlusData;
65 :
66 : // note there are routines that lie outside of the Module at the end of this file
67 :
68 : namespace EMSManager {
69 :
70 : // Parameters for EMS Calling Points
71 : enum class EMSCallFrom
72 : {
73 : Invalid = -1,
74 : ZoneSizing,
75 : SystemSizing,
76 : BeginNewEnvironment,
77 : BeginNewEnvironmentAfterWarmUp,
78 : BeginTimestepBeforePredictor,
79 : BeforeHVACManagers,
80 : AfterHVACManagers,
81 : HVACIterationLoop,
82 : EndSystemTimestepBeforeHVACReporting,
83 : EndSystemTimestepAfterHVACReporting,
84 : EndZoneTimestepBeforeZoneReporting,
85 : EndZoneTimestepAfterZoneReporting,
86 : SetupSimulation,
87 : ExternalInterface,
88 : ComponentGetInput,
89 : UserDefinedComponentModel,
90 : UnitarySystemSizing,
91 : BeginZoneTimestepBeforeInitHeatBalance,
92 : BeginZoneTimestepAfterInitHeatBalance,
93 : BeginZoneTimestepBeforeSetCurrentWeather,
94 : Num
95 : };
96 :
97 : void CheckIfAnyEMS(EnergyPlusData &state);
98 :
99 : void ManageEMS(EnergyPlusData &state,
100 : EMSCallFrom iCalledFrom, // indicates where subroutine was called from, parameters in DataGlobals.
101 : bool &anyProgramRan, // true if any Erl programs ran for this call
102 : ObjexxFCL::Optional_int_const ProgramManagerToRun = _ // specific program manager to run
103 : );
104 :
105 : void InitEMS(EnergyPlusData &state, EMSCallFrom iCalledFrom); // indicates where subroutine was called from, parameters in DataGlobals.
106 :
107 : void ReportEMS(EnergyPlusData &state);
108 :
109 : void GetEMSInput(EnergyPlusData &state);
110 :
111 : void ProcessEMSInput(EnergyPlusData &state, bool reportErrors); // . If true, then report out errors ,otherwise setup what we can
112 :
113 : void GetVariableTypeAndIndex(
114 : EnergyPlusData &state, std::string const &VarName, std::string const &VarKeyName, OutputProcessor::VariableType &VarType, int &VarIndex);
115 :
116 : void EchoOutActuatorKeyChoices(EnergyPlusData &state);
117 :
118 : void EchoOutInternalVariableChoices(EnergyPlusData &state);
119 :
120 : void SetupNodeSetPointsAsActuators(EnergyPlusData &state);
121 :
122 : void UpdateEMSTrendVariables(EnergyPlusData &state);
123 :
124 : bool CheckIfNodeSetPointManaged(EnergyPlusData &state,
125 : int NodeNum, // index of node being checked.
126 : HVAC::CtrlVarType SetPointType,
127 : bool byHandle = false);
128 :
129 : bool CheckIfNodeSetPointManagedByEMS(EnergyPlusData &state,
130 : int NodeNum, // index of node being checked.
131 : HVAC::CtrlVarType SetPointType,
132 : bool &ErrorFlag);
133 :
134 : bool CheckIfNodeMoreInfoSensedByEMS(EnergyPlusData &state,
135 : int nodeNum, // index of node being checked.
136 : std::string const &varName);
137 :
138 : bool isScheduleManaged(EnergyPlusData &state, int const scheduleNum);
139 :
140 : void SetupPrimaryAirSystemAvailMgrAsActuators(EnergyPlusData &state);
141 :
142 : void SetupWindowShadingControlActuators(EnergyPlusData &state);
143 :
144 : void SetupThermostatActuators(EnergyPlusData &state);
145 :
146 : void SetupSurfaceConvectionActuators(EnergyPlusData &state);
147 :
148 : void SetupSurfaceConstructionActuators(EnergyPlusData &state);
149 :
150 : void SetupSurfaceOutdoorBoundaryConditionActuators(EnergyPlusData &state);
151 :
152 : void SetupZoneOutdoorBoundaryConditionActuators(EnergyPlusData &state);
153 :
154 : void SetupZoneInfoAsInternalDataAvail(EnergyPlusData &state);
155 :
156 : void checkForUnusedActuatorsAtEnd(EnergyPlusData &state);
157 :
158 : void checkSetpointNodesAtEnd(EnergyPlusData &state);
159 :
160 : } // namespace EMSManager
161 :
162 : // Moved these setup EMS actuator routines out of module to solve circular use problems between
163 : // ScheduleManager and OutputProcessor. Followed pattern used for SetupOutputVariable
164 :
165 : void SetupEMSActuator(EnergyPlusData &state,
166 : std::string_view cComponentTypeName,
167 : std::string_view cUniqueIDName,
168 : std::string_view cControlTypeName,
169 : std::string_view cUnits,
170 : bool &lEMSActuated,
171 : Real64 &rValue);
172 :
173 : void SetupEMSActuator(EnergyPlusData &state,
174 : std::string_view cComponentTypeName,
175 : std::string_view cUniqueIDName,
176 : std::string_view cControlTypeName,
177 : std::string_view cUnits,
178 : bool &lEMSActuated,
179 : int &iValue);
180 :
181 : void SetupEMSActuator(EnergyPlusData &state,
182 : std::string_view cComponentTypeName,
183 : std::string_view cUniqueIDName,
184 : std::string_view cControlTypeName,
185 : std::string_view cUnits,
186 : bool &lEMSActuated,
187 : bool &lValue);
188 :
189 : void SetupEMSInternalVariable(
190 : EnergyPlusData &state, std::string_view cDataTypeName, std::string_view cUniqueIDName, std::string_view cUnits, Real64 &rValue);
191 :
192 : void SetupEMSInternalVariable(
193 : EnergyPlusData &state, std::string_view cDataTypeName, std::string_view cUniqueIDName, std::string_view cUnits, int &iValue);
194 :
195 : struct EMSManagerData : BaseGlobalStruct
196 : {
197 :
198 : bool GetEMSUserInput = true; // Flag to prevent input from being read multiple times
199 : bool ZoneThermostatActuatorsHaveBeenSetup = false;
200 : bool FinishProcessingUserInput = true; // Flag to indicate still need to process input
201 : bool lDummy = false; // dummy pointer location
202 : bool lDummy2 = false; // dummy pointer location
203 :
204 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override
205 : {
206 796 : }
207 :
208 0 : void clear_state() override
209 : {
210 0 : GetEMSUserInput = true;
211 0 : ZoneThermostatActuatorsHaveBeenSetup = false;
212 0 : FinishProcessingUserInput = true;
213 0 : this->lDummy = false;
214 0 : this->lDummy2 = false;
215 0 : }
216 : };
217 :
218 : } // namespace EnergyPlus
219 :
220 : #endif
|
