Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef OutAirNodeManager_hh_INCLUDED
49 : #define OutAirNodeManager_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/EnergyPlus.hh>
57 :
58 : namespace EnergyPlus {
59 :
60 : // Forward declarations
61 : struct EnergyPlusData;
62 :
63 : namespace OutAirNodeManager {
64 :
65 : void SetOutAirNodes(EnergyPlusData &state);
66 :
67 : void GetOutAirNodesInput(EnergyPlusData &state);
68 :
69 : void InitOutAirNodes(EnergyPlusData &state);
70 :
71 : bool CheckOutAirNodeNumber(EnergyPlusData &state, int NodeNumber); // Number of node to check to see if in Outside Air list
72 :
73 : void CheckAndAddAirNodeNumber(EnergyPlusData &state,
74 : int NodeNumber, // Number of node to check to see if in Outside Air list
75 : bool &Okay // True if found, false if not
76 : );
77 : void SetOANodeValues(EnergyPlusData &state,
78 : int NodeNum, // Number of node to check to see if in Outside Air list
79 : bool InitCall // True if Init calls, false if CheckAndAddAirNodeNumber calls
80 : );
81 : } // namespace OutAirNodeManager
82 :
83 : struct OutAirNodeManagerData : BaseGlobalStruct
84 : {
85 : Array1D_int OutsideAirNodeList; // List of all outside air inlet nodes
86 : int NumOutsideAirNodes = 0; // Number of single outside air nodes
87 : bool GetOutAirNodesInputFlag = true; // Flag set to make sure you get input once
88 :
89 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override
90 : {
91 796 : }
92 :
93 0 : void clear_state() override
94 : {
95 0 : this->OutsideAirNodeList.deallocate();
96 0 : this->NumOutsideAirNodes = 0;
97 0 : this->GetOutAirNodesInputFlag = true;
98 0 : }
99 : };
100 :
101 : } // namespace EnergyPlus
102 :
103 : #endif
|