Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : // C++ Headers
49 : #include <string>
50 : #include <vector>
51 :
52 : // ObjexxFCL Headers
53 : #include <ObjexxFCL/Array1D.hh>
54 : #include <ObjexxFCL/Array2D.hh>
55 : #include <ObjexxFCL/Array2S.hh>
56 : #include <ObjexxFCL/Array3D.hh>
57 :
58 : // EnergyPlus Headers
59 : #include <EnergyPlus/OutputProcessor.hh>
60 : #include <EnergyPlus/OutputReportData.hh>
61 :
62 : namespace EnergyPlus {
63 :
64 0 : AnnualFieldSet::AnnualFieldSet(std::string varName, AnnualFieldSet::AggregationKind kindOfAggregation, int numDigitsShown)
65 : {
66 0 : m_variMeter = varName;
67 0 : m_aggregate = kindOfAggregation;
68 0 : m_showDigits = numDigitsShown;
69 0 : }
70 :
71 0 : int AnnualFieldSet::getVariableKeyCountandTypeFromFldSt(EnergyPlusData &state,
72 : OutputProcessor::VariableType &typeVar,
73 : OutputProcessor::StoreType &avgSumVar,
74 : OutputProcessor::TimeStepType &stepTypeVar,
75 : Constant::Units &unitsVar)
76 : {
77 : int numkeys;
78 0 : GetVariableKeyCountandType(
79 0 : state, m_variMeter, numkeys, typeVar, avgSumVar, stepTypeVar, unitsVar); // call outputprocessor routine with member variable
80 0 : return numkeys;
81 : }
82 :
83 0 : void AnnualFieldSet::getVariableKeysFromFldSt(EnergyPlusData &state,
84 : OutputProcessor::VariableType &typeVar,
85 : int keyCount,
86 : std::vector<std::string> &namesOfKeys,
87 : std::vector<int> &indexesForKeyVar)
88 : {
89 : // this hides the Objexx arrays and returns regular vectors
90 0 : Array1D_int tmpVarNums;
91 0 : Array1D_string tmpVarNames;
92 0 : tmpVarNums.allocate(keyCount);
93 0 : tmpVarNames.allocate(keyCount);
94 0 : GetVariableKeys(state, m_variMeter, typeVar, tmpVarNames, tmpVarNums); // call outputprocessor routine with member variable
95 0 : namesOfKeys.clear();
96 0 : indexesForKeyVar.clear();
97 0 : for (int iKey = 1; iKey <= keyCount; ++iKey) {
98 0 : indexesForKeyVar.push_back(tmpVarNums(iKey));
99 0 : namesOfKeys.push_back(tmpVarNames(iKey));
100 : }
101 0 : }
102 :
103 : } // namespace EnergyPlus
|