Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef PhotovoltaicThermalCollectors_hh_INCLUDED
49 : #define PhotovoltaicThermalCollectors_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/ConvectionCoefficients.hh>
56 : #include <EnergyPlus/Data/BaseData.hh>
57 : #include <EnergyPlus/Plant/Enums.hh>
58 : #include <EnergyPlus/Plant/PlantLocation.hh>
59 : #include <EnergyPlus/PlantComponent.hh>
60 :
61 : namespace EnergyPlus {
62 :
63 : // Forward declarations
64 : struct EnergyPlusData;
65 :
66 : namespace PhotovoltaicThermalCollectors {
67 :
68 : enum class PVTMode
69 : {
70 : Invalid = -1,
71 : Heating,
72 : Cooling,
73 : Num
74 : };
75 :
76 : enum struct WorkingFluidEnum
77 : {
78 : Invalid = -1,
79 : LIQUID,
80 : AIR,
81 : Num
82 : };
83 :
84 : enum struct ThermEfficEnum
85 : {
86 : Invalid = -1,
87 : SCHEDULED,
88 : FIXED,
89 : Num
90 : };
91 :
92 : constexpr std::array<std::string_view, static_cast<int>(ThermEfficEnum::Num)> ThermEfficTypeNamesUC = {"SCHEDULED", "FIXED"};
93 :
94 : struct SimplePVTModelStruct
95 : {
96 : std::string Name;
97 : Real64 ThermalActiveFract = 0.0; // fraction of surface area with active thermal collection
98 : ThermEfficEnum ThermEfficMode = ThermEfficEnum::FIXED; // setting for how therm effic is determined
99 : Real64 ThermEffic = 0.0; // fixed or current Therm efficiency
100 : int ThermEffSchedNum = 0; // pointer to schedule for therm effic (if any)
101 : Real64 SurfEmissivity = 0.0; // surface emittance in long wave IR
102 : Real64 LastCollectorTemp = 0.0; // store previous temperature
103 : };
104 :
105 : struct BIPVTModelStruct
106 : {
107 : std::string Name;
108 : std::string OSCMName; // OtherSideConditionsModel
109 : int OSCMPtr = 0; // OtherSideConditionsModel index
110 : int SchedPtr = 0; // Availablity schedule
111 : Real64 PVEffGapWidth = 0.0; // Effective Gap Plenum Behind PV modules (m)
112 : Real64 PVCellTransAbsProduct = 0.0; // PV cell Transmittance-Absorptance prodiuct
113 : Real64 BackMatTranAbsProduct = 0.0; // Backing Material Normal Transmittance-Absorptance Product
114 : Real64 CladTranAbsProduct = 0.0; // Cladding Normal Transmittance-Absorptance Product
115 : Real64 PVAreaFract = 0.0; // Fraction of collector gross area covered by PV module
116 : Real64 PVCellAreaFract = 0.0; // Fraction of PV cell area to module area
117 : Real64 PVRTop = 0.0; // PV module top thermal resistance (m2-DegC/W)
118 : Real64 PVRBot = 0.0; // PV module bottom thermal resistance (m2-DegC/W)
119 : Real64 PVGEmiss = 0.0; // Emissivity PV modules
120 : Real64 BackMatEmiss = 0.0; // Emissivity of backing material
121 : Real64 ThGlass = 0.0; // Glass thickness (m)
122 : Real64 RIndGlass = 0.0; // Glass refraction index
123 : Real64 ECoffGlass = 0.0; // Glass extinction coefficient
124 : Real64 LastCollectorTemp = 0.0; // store previous temperature (DegC)
125 : Real64 Tplen = 20.0; // modeled drybulb temperature for air through BIPVT channel (DegC)
126 : Real64 Tcoll = 20.0; // modeled temperature of BIPVT channel surface on PV side (DegC)
127 : Real64 HrPlen = 1.0; // Modeled radiation coef for OSCM (W/m2-C)
128 : Real64 HcPlen = 10.0; // Modeled Convection coef for OSCM (W/m2-C)
129 : };
130 :
131 : struct PVTReportStruct
132 : {
133 : Real64 ThermPower = 0.0; // Heat gain or loss to collector fluid (W)
134 : Real64 ThermHeatGain = 0.0; // Heat gain to collector fluid (W)
135 : Real64 ThermHeatLoss = 0.0; // Heat loss from collector fluid (W)
136 : Real64 ThermEnergy = 0.0; // Energy gained (or lost) to collector fluid (J)
137 : Real64 MdotWorkFluid = 0.0; // working fluid mass flow rate (kg/s)
138 : Real64 TinletWorkFluid = 0.0; // working fluid inlet temp (C)
139 : Real64 ToutletWorkFluid = 0.0; // working fluid outlet temp (C)
140 : Real64 BypassStatus = 0.0; // 0 = no bypass, 1=full bypass
141 : };
142 :
143 : enum class PVTModelType
144 : {
145 : Invalid = -1,
146 : Simple = 1001,
147 : BIPVT = 1002,
148 : Num
149 : };
150 :
151 : struct PVTCollectorStruct : PlantComponent
152 : {
153 : std::string Name; // Name of PVT collector
154 : DataPlant::PlantEquipmentType Type = DataPlant::PlantEquipmentType::Invalid; // Plant Side Connection: 'Type' assigned in DataPlant
155 : PlantLocation WPlantLoc; // Water plant loop component location
156 : bool EnvrnInit = true; // manage begin environment inits
157 : bool SizingInit = true; // manage when sizing is complete
158 : std::string PVTModelName; // Name of PVT performance object
159 : PVTModelType ModelType = PVTModelType::Invalid; // model type indicator
160 : PVTMode OperatingMode = PVTMode::Invalid; // PVT operating mode (heating or cooling)
161 : int SurfNum = 0; // surface index
162 : std::string PVname; // named Generator:Photovoltaic object
163 : int PVnum = 0; // PV index
164 : bool PVfound = false; // init, need to delay get input until PV gotten
165 : SimplePVTModelStruct Simple; // Simple performance data structure.
166 : BIPVTModelStruct BIPVT; // BIPVT performance data structure.
167 : WorkingFluidEnum WorkingFluidType = WorkingFluidEnum::LIQUID;
168 : int PlantInletNodeNum = 0;
169 : int PlantOutletNodeNum = 0;
170 : int HVACInletNodeNum = 0;
171 : int HVACOutletNodeNum = 0;
172 : Real64 DesignVolFlowRate = 0.0;
173 : bool DesignVolFlowRateWasAutoSized = false; // true if design volume flow rate was autosize on input
174 : Real64 MaxMassFlowRate = 0.0;
175 : Real64 MassFlowRate = 0.0;
176 : Real64 AreaCol = 0.0;
177 : bool BypassDamperOff = true;
178 : bool CoolingUseful = false;
179 : bool HeatingUseful = false;
180 : PVTReportStruct Report;
181 : bool MySetPointCheckFlag = true;
182 : bool MyOneTimeFlag = true;
183 : bool SetLoopIndexFlag = true;
184 : Real64 QdotSource = 0.0; // Source/sink term
185 :
186 : static PlantComponent *factory(EnergyPlusData &state, std::string_view objectName);
187 :
188 : void onInitLoopEquip([[maybe_unused]] EnergyPlusData &state, const PlantLocation &calledFromLocation) override;
189 :
190 : void simulate([[maybe_unused]] EnergyPlusData &state,
191 : const PlantLocation &calledFromLocation,
192 : bool FirstHVACIteration,
193 : Real64 &CurLoad,
194 : bool RunFlag) override;
195 :
196 : void setupReportVars(EnergyPlusData &state);
197 :
198 : void initialize(EnergyPlusData &state, bool FirstHVACIteration);
199 :
200 : void size(EnergyPlusData &state);
201 :
202 : void control(EnergyPlusData &state);
203 :
204 : void calculate(EnergyPlusData &state);
205 :
206 : void calculateSimplePVT(EnergyPlusData &state);
207 :
208 : void calculateBIPVT(EnergyPlusData &state);
209 :
210 : void calculateBIPVTMaxHeatGain(EnergyPlusData &state, Real64 tsp, Real64 &bfr, Real64 &q, Real64 &tmixed, Real64 &ThEff, Real64 &tpv);
211 :
212 : void solveLinSysBackSub(std::array<Real64, 9> &jj, std::array<Real64, 3> &f, std::array<Real64, 3> &y);
213 :
214 : Real64 calc_k_taoalpha(Real64 theta, Real64 glass_thickness, Real64 refrac_index_glass, Real64 k_glass);
215 :
216 : Real64 calc_taoalpha(Real64 theta, Real64 glass_thickness, Real64 refrac_index_glass, Real64 k_glass);
217 :
218 : void update(EnergyPlusData &state);
219 :
220 : void oneTimeInit(EnergyPlusData &state) override;
221 : };
222 :
223 : void GetPVTcollectorsInput(EnergyPlusData &state);
224 :
225 : void GetPVTSimpleCollectorsInput(EnergyPlusData &state, int NumSimplePVTPerform, Array1D<SimplePVTModelStruct> &tmpSimplePVTperf);
226 :
227 : void GetBIPVTCollectorsInput(EnergyPlusData &state, int NumBIPVTPerform, Array1D<BIPVTModelStruct> &tmpBIPVTperf);
228 :
229 : void GetMainPVTInput(EnergyPlusData &state,
230 : int NumPVT,
231 : Array1D<PVTCollectorStruct> &PVT,
232 : Array1D<SimplePVTModelStruct> const &tmpSimplePVTperf,
233 : Array1D<BIPVTModelStruct> const &tmpBIPVTperf);
234 :
235 : void simPVTfromOASys(EnergyPlusData &state, int index, bool FirstHVACIteration);
236 :
237 : int getPVTindexFromName(EnergyPlusData &state, std::string_view name);
238 :
239 : void GetPVTThermalPowerProduction(EnergyPlusData &state, int PVindex, Real64 &ThermalPower, Real64 &ThermalEnergy);
240 :
241 : int GetAirInletNodeNum(EnergyPlusData &state, std::string_view PVTName, bool &ErrorsFound);
242 :
243 : int GetAirOutletNodeNum(EnergyPlusData &state, std::string_view PVTName, bool &ErrorsFound);
244 :
245 : int GetPVTmodelIndex(EnergyPlusData &state, int SurfacePtr);
246 :
247 : void SetPVTQdotSource(EnergyPlusData &state, int PVTNum, Real64 QSource);
248 :
249 : void GetPVTTsColl(EnergyPlusData &state, int PVTNum, Real64 &TsColl);
250 :
251 : } // namespace PhotovoltaicThermalCollectors
252 :
253 : struct PhotovoltaicThermalCollectorsData : BaseGlobalStruct
254 : {
255 : bool GetInputFlag = true; // First time, input is "gotten"
256 : int NumPVT = 0; // count of all types of PVT in input file
257 : Array1D<PhotovoltaicThermalCollectors::PVTCollectorStruct> PVT;
258 :
259 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override
260 : {
261 796 : }
262 :
263 0 : void clear_state() override
264 : {
265 0 : new (this) PhotovoltaicThermalCollectorsData();
266 0 : }
267 : };
268 :
269 : } // namespace EnergyPlus
270 :
271 : #endif
|
