Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef RoomAirModelAirflowNetwork_hh_INCLUDED
49 : #define RoomAirModelAirflowNetwork_hh_INCLUDED
50 :
51 : // EnergyPlus Headers
52 : #include <EnergyPlus/Data/BaseData.hh>
53 : #include <EnergyPlus/EnergyPlus.hh>
54 :
55 : namespace EnergyPlus {
56 :
57 : // Forward declarations
58 : struct EnergyPlusData;
59 :
60 : namespace RoomAir {
61 :
62 : // Data
63 : void InitRoomAirModelAFN(EnergyPlusData &state,
64 : int const zoneNum,
65 : int const roomAirNodeNum); // index number for the specified zone and room air node
66 :
67 : void CalcRoomAirModelAFN(EnergyPlusData &state,
68 : int const zoneNum,
69 : int const roomAirNodeNum); // index number for the specified zone and room air node
70 :
71 : void UpdateRoomAirModelAFN(EnergyPlusData &state,
72 : int const zoneNum); // index number for the specified zone
73 :
74 : void CalcNodeSums(EnergyPlusData &state, int const zoneNum,
75 : int const roomAirNodeNum); // index number for the specified zone and room air node
76 :
77 : void SumNonAirSystemResponseForNode(EnergyPlusData &state,
78 : int const zoneNum,
79 : int const roomAirNodeNum); // index number for the specified zone and room air node
80 :
81 : void SumSystemDepResponseForNode(EnergyPlusData &state,
82 : int const zoneNum); // index number for the specified zone and room air node
83 :
84 : void CalcSurfaceMoistureSums(EnergyPlusData &state,
85 : int const zoneNum,
86 : int const roomAirNodeNum,
87 : Real64 &SumHmAW,
88 : Real64 &SumHmARa,
89 : Real64 &SumHmARaW,
90 : Array1D<bool> const &SurfMask);
91 :
92 : void SimRoomAirModelAFN(EnergyPlusData &state, int const ZoneNum); // index number for the specified zone
93 :
94 : void LoadPredictionRoomAirModelAFN(EnergyPlusData &state,
95 : int const zoneNum,
96 : int const roomAirNodeNum); // index number for the specified zone and node
97 :
98 : //*****************************************************************************************
99 :
100 : } // namespace RoomAir
101 :
102 : struct RoomAirModelAirflowNetworkData : BaseGlobalStruct
103 : {
104 : bool OneTimeFlag = true;
105 : bool OneTimeFlagConf = true;
106 : bool EnvrnFlag = true;
107 :
108 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override
109 : {
110 796 : }
111 :
112 0 : void clear_state() override
113 : {
114 0 : this->OneTimeFlag = true;
115 0 : this->OneTimeFlagConf = true;
116 0 : this->EnvrnFlag = true;
117 0 : }
118 : };
119 :
120 : } // namespace EnergyPlus
121 :
122 : #endif
|
