Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef SizingManager_hh_INCLUDED
49 : #define SizingManager_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/DataHeatBalance.hh>
58 : #include <EnergyPlus/DataSizing.hh>
59 : #include <EnergyPlus/EnergyPlus.hh>
60 :
61 : namespace EnergyPlus {
62 :
63 : // Forward declarations
64 : struct EnergyPlusData;
65 :
66 : namespace SizingManager {
67 :
68 : struct ZoneListData
69 : {
70 : // Members
71 : std::string Name;
72 : int NumOfZones;
73 : Array1D_int Zones;
74 :
75 : // Default Constructor
76 436 : ZoneListData() : NumOfZones(0)
77 : {
78 436 : }
79 : };
80 :
81 : void ManageSizing(EnergyPlusData &state);
82 :
83 : bool CalcdoLoadComponentPulseNow(
84 : EnergyPlusData &state, bool isPulseZoneSizing, bool WarmupFlag, int HourOfDay, int TimeStep, Constant::KindOfSim KindOfSim);
85 :
86 : void ManageSystemSizingAdjustments(EnergyPlusData &state);
87 :
88 : void ManageSystemVentilationAdjustments(EnergyPlusData &state);
89 :
90 : void DetermineSystemPopulationDiversity(EnergyPlusData &state);
91 :
92 : void GetOARequirements(EnergyPlusData &state);
93 :
94 : void ProcessInputOARequirements(EnergyPlusData &state,
95 : std::string const &cCurrentModuleObject,
96 : int OAIndex,
97 : Array1D_string const &cAlphaArgs,
98 : int &NumAlphas,
99 : Array1D<Real64> const &rNumericArgs,
100 : int &NumNumbers,
101 : Array1D_bool const &lAlphaFieldBlanks,
102 : Array1D_string const &cAlphaFieldNames,
103 : bool &ErrorsFound // If errors found in input
104 : );
105 :
106 : void GetZoneAirDistribution(EnergyPlusData &state);
107 :
108 : void GetZoneHVACSizing(EnergyPlusData &state);
109 :
110 : void GetAirTerminalSizing(EnergyPlusData &state);
111 :
112 : void GetSizingParams(EnergyPlusData &state);
113 :
114 : void GetZoneSizingInput(EnergyPlusData &state);
115 :
116 : void ReportTemperatureInputError(EnergyPlusData &state,
117 : std::string cObjectName,
118 : int const paramNum,
119 : Real64 comparisonTemperature,
120 : bool const shouldFlagSevere,
121 : bool &ErrorsFound);
122 :
123 : void GetZoneAndZoneListNames(
124 : EnergyPlusData &state, bool &ErrorsFound, int &NumZones, Array1D_string &ZoneNames, int &NumZoneLists, Array1D<ZoneListData> &ZoneListNames);
125 :
126 : void GetSystemSizingInput(EnergyPlusData &state);
127 :
128 : void GetPlantSizingInput(EnergyPlusData &state);
129 :
130 : void SetupZoneSizing(EnergyPlusData &state, bool &ErrorsFound);
131 :
132 : void reportZoneSizing(EnergyPlusData &state,
133 : DataHeatBalance::ZoneSpaceData const &zoneOrSpace,
134 : DataSizing::ZoneSizingData const &zsFinalSizing,
135 : DataSizing::ZoneSizingData const &zsCalcFinalSizing,
136 : Array2D<DataSizing::ZoneSizingData> const &zsCalcSizing,
137 : Array2D<DataSizing::ZoneSizingData> const &zSizing,
138 : bool const isSpace);
139 :
140 : void reportZoneSizingEio(EnergyPlusData &state,
141 : std::string const &ZoneName, // the name of the zone
142 : std::string const &LoadType, // the description of the input variable
143 : Real64 CalcDesLoad, // the value from the sizing calculation [W]
144 : Real64 UserDesLoad, // the value from the sizing calculation modified by user input [W]
145 : Real64 CalcDesFlow, // calculated design air flow rate [m3/s]
146 : Real64 UserDesFlow, // user input or modified design air flow rate [m3/s]
147 : std::string const &DesDayName, // the name of the design day that produced the peak
148 : std::string const &PeakHrMin, // time stamp of the peak
149 : Real64 PeakTemp, // temperature at peak [C]
150 : Real64 PeakHumRat, // humidity ratio at peak [kg water/kg dry air]
151 : Real64 FloorArea, // zone floor area [m2]
152 : Real64 TotOccs, // design number of occupants for the zone
153 : Real64 MinOAVolFlow, // zone design minimum outside air flow rate [m3/s]
154 : Real64 DOASHeatAddRate, // zone design heat addition rate from the DOAS [W]
155 : bool const isSpace);
156 :
157 : void ReportSysSizing(EnergyPlusData &state,
158 : std::string const &SysName, // the name of the zone
159 : std::string_view LoadType, // either "Cooling" or "Heating"
160 : std::string_view PeakLoadType, // either "Sensible" or "Total"
161 : Real64 UserDesCap, // User Design Capacity
162 : Real64 CalcDesVolFlow, // Calculated Design Air Flow Rate
163 : Real64 UserDesVolFlow, // User Design Air Flow Rate
164 : std::string const &DesDayName, // the name of the design day that produced the peak
165 : std::string const &DesDayDate, // the date that produced the peak
166 : int TimeStepIndex // time step of the peak
167 : );
168 :
169 : std::string TimeIndexToHrMinString(EnergyPlusData &state, int timeIndex);
170 :
171 : void UpdateFacilitySizing(EnergyPlusData &state, Constant::CallIndicator CallIndicator);
172 :
173 : void UpdateTermUnitFinalZoneSizing(EnergyPlusData &state);
174 :
175 : } // namespace SizingManager
176 :
177 : struct SizingManagerData : BaseGlobalStruct
178 : {
179 :
180 : // MODULE VARIABLE DECLARATIONS:
181 : int NumAirLoops = 0;
182 : bool ReportZoneSizingMyOneTimeFlag = true;
183 : bool ReportSpaceSizingMyOneTimeFlag = true;
184 : bool ReportSysSizingMyOneTimeFlag = true;
185 : bool runZeroingOnce = true;
186 :
187 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override
188 : {
189 796 : }
190 :
191 0 : void clear_state() override
192 : {
193 0 : NumAirLoops = 0;
194 0 : ReportZoneSizingMyOneTimeFlag = true;
195 0 : ReportSpaceSizingMyOneTimeFlag = true;
196 0 : ReportSysSizingMyOneTimeFlag = true;
197 0 : runZeroingOnce = true;
198 0 : }
199 : };
200 :
201 : } // namespace EnergyPlus
202 :
203 : #endif
|
