Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2024, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef UFADManager_hh_INCLUDED
49 : #define UFADManager_hh_INCLUDED
50 :
51 : // EnergyPlus Headers
52 : #include <EnergyPlus/Data/BaseData.hh>
53 : #include <EnergyPlus/EnergyPlus.hh>
54 :
55 : namespace EnergyPlus {
56 :
57 : // Forward declarations
58 : struct EnergyPlusData;
59 :
60 : namespace RoomAir {
61 :
62 : struct UFADConvCoef
63 : {
64 : Real64 HAT_MX = 0.0; // HAT_MX Convection Coefficient times Area times Temperature for the upper subzone
65 : Real64 HAT_MXWin = 0.0; // HAT_MX Convection Coefficient times Area times Temperature for the upper subzone (windows only)
66 : Real64 HA_MX = 0.0; // HA_MX Convection Coefficient times Area for the upper subzone
67 : Real64 HA_MXWin = 0.0; // HA_MX Convection Coefficient times Area for the upper subzone (windows only)
68 : Real64 HAT_OC = 0.0; // HAT_OC Convection Coefficient times Area times Temperature for the lower subzone
69 : Real64 HAT_OCWin = 0.0; // HAT_OC Convection Coefficient times Area times Temperature for the lower subzone (windows only)
70 : Real64 HA_OC = 0.0; // HA_OC Convection Coefficient times Area for the lower subzone
71 : Real64 HA_OCWin = 0.0; // HA_OC Convection Coefficient times Area for the lower subzone (windows only)
72 : Real64 HAT_FLOOR = 0.0; // HAT_FLOOR Convection Coefficient times Area times Temperature for the floor(?) subzone
73 : Real64 HA_FLOOR = 0.0; // HA_FLOOR Convection Coefficient times Area for the floor(?) subzone
74 : };
75 :
76 : void ManageUFAD(EnergyPlusData &state,
77 : int const ZoneNum, // index number for the specified zone
78 : RoomAir::RoomAirModel const ZoneModelType // type of zone model; UCSDUFI = 6
79 : );
80 :
81 : void InitUFAD(EnergyPlusData &state,
82 : int const ZoneNum,
83 : RoomAir::RoomAirModel const ZoneModelType // type of zone model; UCSDUFI = 6
84 : );
85 :
86 : void SizeUFAD(EnergyPlusData &state,
87 : int const ZoneNum,
88 : RoomAir::RoomAirModel const ZoneModelType // type of zone model; UCSDUFI = 6
89 : );
90 :
91 : Real64 sumUFADConvGainPerPlume(EnergyPlusData &state, int const zoneNum, Real64 const numOccupants);
92 :
93 : void HcUFAD(EnergyPlusData &state, int const ZoneNum, Real64 const FractionHeight, UFADConvCoef &ufadCC);
94 :
95 : void CalcUFADInt(EnergyPlusData &state, int const ZoneNum); // index number for the specified zone
96 :
97 : void CalcUFADExt(EnergyPlusData &state, int const ZoneNum); // index number for the specified zone
98 :
99 : } // namespace RoomAir
100 :
101 : struct UFADManagerData : BaseGlobalStruct
102 : {
103 :
104 : Real64 HeightFloorSubzoneTop = 0.2; // Assumed thickness of floor subzone
105 : Real64 ThickOccupiedSubzoneMin = 0.2; // Minimum thickness of occupied subzone
106 : Real64 HeightIntMass = 0.0; // Height of internal mass surfaces, assumed vertical, cannot exceed ceiling height
107 : Real64 HeightIntMassDefault = 2.0; // Default height of internal mass surfaces
108 :
109 : bool MyOneTimeFlag = true;
110 : Array1D_bool MySizeFlag;
111 :
112 796 : void init_state([[maybe_unused]] EnergyPlusData &state) override
113 : {
114 796 : }
115 :
116 0 : void clear_state() override
117 : {
118 0 : this->MyOneTimeFlag = true;
119 0 : this->MySizeFlag.deallocate();
120 0 : }
121 :
122 : // Default Constructor
123 796 : UFADManagerData() = default;
124 : };
125 : } // namespace EnergyPlus
126 :
127 : #endif
|
