Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2025, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef DataBranchNodeConnections_hh_INCLUDED
49 : #define DataBranchNodeConnections_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EPVector.hh>
58 : #include <EnergyPlus/EnergyPlus.hh>
59 : #include <EnergyPlus/NodeInputManager.hh>
60 :
61 : namespace EnergyPlus {
62 :
63 : namespace DataBranchNodeConnections {
64 :
65 : struct ComponentListData
66 : {
67 : // Members
68 : // std::string ParentCType; // Parent Object Type (Cannot be SPLITTER or MIXER)
69 : DataLoopNode::ConnectionObjectType ParentObjectType = DataLoopNode::ConnectionObjectType::Invalid;
70 : std::string ParentCName; // Parent Object Name
71 : // std::string CType; // Component Type (Cannot be SPLITTER or MIXER)
72 : DataLoopNode::ConnectionObjectType ComponentObjectType = DataLoopNode::ConnectionObjectType::Invalid;
73 : std::string CName; // Component Name
74 : std::string InletNodeName; // Inlet Node ID
75 : std::string OutletNodeName; // Outlet Node ID
76 : std::string Description; // Description of Component List Type
77 : };
78 :
79 : struct NodeConnectionDef
80 : {
81 : // Members
82 : int NodeNumber = 0; // Node number of this node connection
83 : std::string NodeName; // Node Name of this node connection
84 : DataLoopNode::ConnectionObjectType ObjectType = DataLoopNode::ConnectionObjectType::Invalid; // Object/Component Type of this node connection
85 : std::string ObjectName; // Name of the Object/Component Type of this node connection
86 : DataLoopNode::ConnectionType ConnectionType =
87 : DataLoopNode::ConnectionType::Invalid; // Connection Type (must be valid) for this node connection
88 : NodeInputManager::CompFluidStream FluidStream = NodeInputManager::CompFluidStream::Invalid; // Fluid Stream for this node connection
89 : bool ObjectIsParent = false; // Indicator whether the object is a parent or not
90 : };
91 :
92 : struct ParentListData
93 : {
94 : // Members
95 : DataLoopNode::ConnectionObjectType ComponentType =
96 : DataLoopNode::ConnectionObjectType::Invalid; // Component Type (Cannot be SPLITTER or MIXER)
97 : std::string ComponentName; // Component Name
98 : std::string InletNodeName; // Inlet Node ID
99 : std::string OutletNodeName; // Outlet Node ID
100 : std::string Description; // Description of Component List Type
101 : };
102 :
103 : struct EqNodeConnectionDef
104 : {
105 : // Members
106 : std::string NodeName; // Node Name of this node connection
107 : DataLoopNode::ConnectionObjectType ObjectType = DataLoopNode::ConnectionObjectType::Invalid; // Object/Component Type of this node connection
108 : std::string ObjectName; // Name of the Object/Component Type of this node connection
109 : std::string InputFieldName; // Input Field Name for this connection
110 : DataLoopNode::ConnectionType ConnectionType =
111 : DataLoopNode::ConnectionType::Invalid; // Connection Type (must be valid) for this node connection
112 : };
113 :
114 : } // namespace DataBranchNodeConnections
115 :
116 : struct BranchNodeConnectionsData : BaseGlobalStruct
117 : {
118 :
119 : int NumCompSets = 0; // Number of Component Sets found in branches
120 : int NumNodeConnectionErrors = 0; // Count of node connection errors
121 : int NumOfNodeConnections = 0;
122 : int MaxNumOfNodeConnections = 0;
123 : int NumOfActualParents = 0;
124 : int NumOfAirTerminalNodes = 0;
125 : int MaxNumOfAirTerminalNodes = 0;
126 :
127 : EPVector<DataBranchNodeConnections::ComponentListData> CompSets;
128 : EPVector<DataBranchNodeConnections::ParentListData> ParentNodeList;
129 : EPVector<DataBranchNodeConnections::NodeConnectionDef> NodeConnections;
130 : EPVector<DataBranchNodeConnections::EqNodeConnectionDef> AirTerminalNodeConnections;
131 : Array1D_bool NonConnectedNodes;
132 :
133 2126 : void init_constant_state([[maybe_unused]] EnergyPlusData &state) override
134 : {
135 2126 : }
136 :
137 1152 : void init_state([[maybe_unused]] EnergyPlusData &state) override
138 : {
139 1152 : }
140 :
141 2100 : void clear_state() override
142 : {
143 2100 : new (this) BranchNodeConnectionsData();
144 2100 : }
145 : };
146 :
147 : } // namespace EnergyPlus
148 :
149 : #endif
|
