Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2025, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef DataMoistureBalance_hh_INCLUDED
49 : #define DataMoistureBalance_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 : #include <ObjexxFCL/Array2D.hh>
54 : #include <ObjexxFCL/Array3D.hh>
55 : #include <ObjexxFCL/Array4D.hh>
56 :
57 : // EnergyPlus Headers
58 : #include <EnergyPlus/Data/BaseData.hh>
59 : #include <EnergyPlus/EnergyPlus.hh>
60 :
61 : namespace EnergyPlus {
62 :
63 : struct MoistureBalanceData : BaseGlobalStruct
64 : {
65 : // This is more or less the traditional value from BLAST.
66 : // static constexpr Real64 Lam = 2500000.0; // heat of adsorption for building materials
67 : // Public Variables that will also be used in the Moisture Surface Balance
68 : Array3D<Real64> FluxH; // transfer function coeff for calculating the CPF Flux history term
69 : Array4D<Real64> Icoef; // transfer function coeff for calculating the CPF history term
70 : Array2D<Real64> DiffC; // Thermal Diffusivity in combined potential formulation (CPF)
71 : // for each equation
72 : Array2D<Real64> mtinc; // # of Moisture transfer function time increment for each equation
73 : Array1D<Real64> S1; // Thermal Diffusivity in combined potential formulation (CPF)
74 : // for each equation
75 : Array1D<Real64> R2; // Thermal Diffusivity in combined potential formulation (CPF)
76 : // for each equation
77 : Array1D<Real64> TempOutsideAirFD; // Temperature outside air for the FD surface
78 :
79 : Array2D_int mhstry; // # of FD History terms for each equation
80 : Array1D_int CMTF; // Type of material layer
81 : Array2D_int Nmrf; // # of Moisture Response Factors for CPF Solution
82 :
83 : // variables used for MTF moisture implementation
84 : Array1D<Real64> RhoVaporAirOut; // Vapor Density outside surface
85 : Array1D<Real64> RhoVaporAirIn; // Vapor Density inside surface
86 : Array1D<Real64> HConvExtFD; // thermal convection coefficient outside surface
87 : Array1D<Real64> HMassConvExtFD; // mass convection coefficient outside surface
88 : Array1D<Real64> HConvInFD; // thermal convection coefficient inside surface
89 : Array1D<Real64> HMassConvInFD; // mass convection coefficient inside surface
90 : Array1D<Real64> RhoVaporSurfIn; // Vapor Density inside surface
91 : Array1D<Real64> HSkyFD; // Sky Convection Coefficient
92 : Array1D<Real64> HGrndFD; // Ground Convection Coefficient
93 : Array1D<Real64> HAirFD; // Air Convection Coefficient
94 :
95 2126 : void init_constant_state([[maybe_unused]] EnergyPlusData &state) override
96 : {
97 2126 : }
98 :
99 1152 : void init_state([[maybe_unused]] EnergyPlusData &state) override
100 : {
101 1152 : }
102 :
103 2100 : void clear_state() override
104 : {
105 2100 : new (this) MoistureBalanceData();
106 2100 : }
107 : };
108 :
109 : } // namespace EnergyPlus
110 :
111 : #endif
|
