Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2025, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef HybridModel_hh_INCLUDED
49 : #define HybridModel_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array1D.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/Data/BaseData.hh>
56 : #include <EnergyPlus/DataGlobals.hh>
57 : #include <EnergyPlus/EnergyPlus.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : // Forward declarations
62 : struct EnergyPlusData;
63 :
64 : namespace HybridModel {
65 :
66 : // Using/Aliasing
67 :
68 : // Data
69 : // MODULE PARAMETER DEFINITIONS
70 :
71 : // MODULE VARIABLE TYPE DECLARATIONS:
72 :
73 : // SUBROUTINE SPECIFICATIONS:
74 :
75 : // Types
76 :
77 : struct HybridModelZone
78 : {
79 : // Members
80 : std::string Name;
81 : Sched::Schedule *measuredTempSched = nullptr;
82 : Sched::Schedule *measuredHumRatSched = nullptr;
83 : Sched::Schedule *measuredCO2ConcSched = nullptr;
84 :
85 : Sched::Schedule *peopleActivityLevelSched = nullptr;
86 : Sched::Schedule *peopleSensibleFracSched = nullptr;
87 : Sched::Schedule *peopleRadiantFracSched = nullptr;
88 : Sched::Schedule *peopleCO2GenRateSched = nullptr;
89 :
90 : Sched::Schedule *supplyAirTempSched = nullptr;
91 : Sched::Schedule *supplyAirMassFlowRateSched = nullptr;
92 : Sched::Schedule *supplyAirHumRatSched = nullptr;
93 : Sched::Schedule *supplyAirCO2ConcSched = nullptr;
94 :
95 : bool InternalThermalMassCalc_T = false; // Calculate thermal mass flag with measured temperature
96 : bool InfiltrationCalc_T = false; // Calculate air infiltration rate flag with measured temperature
97 : bool InfiltrationCalc_H = false; // Calculate air infiltration rate flag with measured humidity ratio
98 : bool InfiltrationCalc_C = false; // Calculate air infiltration rate flag with measured CO2 concentration
99 : bool PeopleCountCalc_T = false; // Calculate zone people count flag with measured temperature
100 : bool PeopleCountCalc_H = false; // Calculate zone people count flag with measured humidity ratio
101 : bool PeopleCountCalc_C = false; // Calculate zone people count flag with measured CO2 concentration
102 : bool IncludeSystemSupplyParameters = false; // Flag to decide whether to include system supply terms
103 :
104 : int measuredTempStartMonth = 0;
105 : int measuredTempStartDate = 0;
106 : int measuredTempEndMonth = 0;
107 : int measuredTempEndDate = 0;
108 : int HybridStartDayOfYear = 0; // Hybrid model start date of year
109 : int HybridEndDayOfYear = 0; // Hybrid model end date of year
110 : };
111 :
112 : // Object Data
113 :
114 : // Functions
115 :
116 : void GetHybridModelZone(EnergyPlusData &state);
117 :
118 : } // namespace HybridModel
119 :
120 : struct HybridModelData : BaseGlobalStruct
121 : {
122 :
123 : bool FlagHybridModel = false; // True if hybrid model is activated
124 : bool FlagHybridModel_TM = false; // User input IM option - True if hybrid model (thermal mass) is activated
125 : bool FlagHybridModel_AI = false; // User input IM option - True if hybrid model (air infiltration) is activated
126 : bool FlagHybridModel_PC = false; // User input IM option - True if hybrid model (people count) is activated
127 :
128 : int NumOfHybridModelZones = 0; // Number of hybrid model zones in the model
129 : std::string CurrentModuleObject; // to assist in getting input
130 :
131 : Array1D<HybridModel::HybridModelZone> hybridModelZones;
132 :
133 2126 : void init_constant_state([[maybe_unused]] EnergyPlusData &state) override
134 : {
135 2126 : }
136 :
137 1152 : void init_state([[maybe_unused]] EnergyPlusData &state) override
138 : {
139 1152 : }
140 :
141 2100 : void clear_state() override
142 : {
143 2100 : this->FlagHybridModel = false;
144 2100 : this->FlagHybridModel_TM = false;
145 2100 : this->FlagHybridModel_AI = false;
146 2100 : this->FlagHybridModel_PC = false;
147 2100 : this->NumOfHybridModelZones = 0;
148 2100 : this->CurrentModuleObject.clear();
149 2100 : this->hybridModelZones.deallocate();
150 2100 : }
151 : };
152 :
153 : } // namespace EnergyPlus
154 :
155 : #endif
|
