Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2025, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef PlantTopologySubcomponents_hh_INCLUDED
49 : #define PlantTopologySubcomponents_hh_INCLUDED
50 :
51 : #include <EnergyPlus/OutputProcessor.hh>
52 :
53 : namespace EnergyPlus {
54 : namespace DataPlant {
55 :
56 : struct SubSubcomponentData // data for an individual component
57 : {
58 : // Members
59 : std::string TypeOf; // The 'keyWord' identifying component type
60 : std::string Name; // Component name
61 : int CompIndex; // Component Index in whatever is using this component
62 : std::string NodeNameIn; // Component inlet node name
63 : std::string NodeNameOut; // Component outlet node name
64 : bool ON; // TRUE = designated component or operation scheme available
65 : int NodeNumIn; // Component inlet node number
66 : int NodeNumOut; // Component outlet node number
67 : bool MeteredVarsFound;
68 : int NumMeteredVars;
69 : int EnergyTransComp; // 1=EnergyTransfer, 0=No EnergyTransfer - Reporting flag
70 : Real64 TotPlantSupplyElec;
71 : Real64 PlantSupplyElecEff;
72 : Real64 PeakPlantSupplyElecEff;
73 : Real64 TotPlantSupplyGas;
74 : Real64 PlantSupplyGasEff;
75 : Real64 PeakPlantSupplyGasEff;
76 : Real64 TotPlantSupplyPurch;
77 : Real64 PlantSupplyPurchEff;
78 : Real64 PeakPlantSupplyPurchEff;
79 : Real64 TotPlantSupplyOther;
80 : Real64 PlantSupplyOtherEff;
81 : Real64 PeakPlantSupplyOtherEff;
82 : Real64 Capacity;
83 : Real64 Efficiency;
84 : int OpMode;
85 : Array1D<OutputProcessor::MeterData> MeteredVar; // Index of energy output report data
86 : int AirSysToPlantPtr; // 0=No plant connection, >0 = index to AirSysToPlant array
87 :
88 : // Default Constructor
89 1 : SubSubcomponentData()
90 3 : : CompIndex(0), ON(true), NodeNumIn(0), NodeNumOut(0), MeteredVarsFound(false), NumMeteredVars(0), EnergyTransComp(0),
91 1 : TotPlantSupplyElec(0.0), PlantSupplyElecEff(0.0), PeakPlantSupplyElecEff(0.0), TotPlantSupplyGas(0.0), PlantSupplyGasEff(0.0),
92 1 : PeakPlantSupplyGasEff(0.0), TotPlantSupplyPurch(0.0), PlantSupplyPurchEff(0.0), PeakPlantSupplyPurchEff(0.0), TotPlantSupplyOther(0.0),
93 1 : PlantSupplyOtherEff(0.0), PeakPlantSupplyOtherEff(0.0), Capacity(0.0), Efficiency(0.0), OpMode(0), AirSysToPlantPtr(0)
94 : {
95 1 : }
96 : };
97 :
98 : struct SubcomponentData // data for an individual component
99 : {
100 : // Members
101 : std::string TypeOf; // The 'keyWord' identifying component type
102 : std::string Name; // Component name
103 : int CompIndex; // Component Index in whatever is using this component
104 : bool Parent; // TRUE = designated component is made up of sub-components
105 : int NumSubSubComps;
106 : std::string NodeNameIn; // Component inlet node name
107 : std::string NodeNameOut; // Component outlet node name
108 : int NodeNumIn; // Component inlet node number
109 : int NodeNumOut; // Component outlet node number
110 : bool MeteredVarsFound;
111 : bool ON; // TRUE = designated component or operation scheme available
112 : int NumMeteredVars;
113 : int EnergyTransComp; // 1=EnergyTransfer, 0=No EnergyTransfer - Reporting flag
114 : Real64 Capacity;
115 : Real64 Efficiency;
116 : int OpMode;
117 : Real64 TotPlantSupplyElec;
118 : Real64 PlantSupplyElecEff;
119 : Real64 PeakPlantSupplyElecEff;
120 : Real64 TotPlantSupplyGas;
121 : Real64 PlantSupplyGasEff;
122 : Real64 PeakPlantSupplyGasEff;
123 : Real64 TotPlantSupplyPurch;
124 : Real64 PlantSupplyPurchEff;
125 : Real64 PeakPlantSupplyPurchEff;
126 : Real64 TotPlantSupplyOther;
127 : Real64 PlantSupplyOtherEff;
128 : Real64 PeakPlantSupplyOtherEff;
129 : int AirSysToPlantPtr; // 0=No plant connection, >0 = index to AirSysToPlant array
130 : Real64 LoopLoadFrac;
131 : Array1D<OutputProcessor::MeterData> MeteredVar; // Index of energy output report data
132 : Array1D<SubSubcomponentData> SubSubComp; // Component list
133 :
134 : // Default Constructor
135 45 : SubcomponentData()
136 135 : : CompIndex(0), Parent(false), NumSubSubComps(0), NodeNumIn(0), NodeNumOut(0), MeteredVarsFound(false), ON(true), NumMeteredVars(0),
137 45 : EnergyTransComp(0), Capacity(0.0), Efficiency(0.0), OpMode(0), TotPlantSupplyElec(0.0), PlantSupplyElecEff(0.0),
138 45 : PeakPlantSupplyElecEff(0.0), TotPlantSupplyGas(0.0), PlantSupplyGasEff(0.0), PeakPlantSupplyGasEff(0.0), TotPlantSupplyPurch(0.0),
139 45 : PlantSupplyPurchEff(0.0), PeakPlantSupplyPurchEff(0.0), TotPlantSupplyOther(0.0), PlantSupplyOtherEff(0.0),
140 45 : PeakPlantSupplyOtherEff(0.0), AirSysToPlantPtr(0), LoopLoadFrac(0.0)
141 : {
142 45 : }
143 : };
144 : } // namespace DataPlant
145 : } // namespace EnergyPlus
146 :
147 : #endif
|
