Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2025, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef TarcogShading_hh_INCLUDED
49 : #define TarcogShading_hh_INCLUDED
50 :
51 : // ObjexxFCL Headers
52 : #include <ObjexxFCL/Array2A.hh>
53 :
54 : // EnergyPlus Headers
55 : #include <EnergyPlus/EnergyPlus.hh>
56 : #include <EnergyPlus/TARCOGGassesParams.hh>
57 : #include <EnergyPlus/TARCOGParams.hh>
58 :
59 : namespace EnergyPlus {
60 :
61 : // Using/Aliasing
62 : using namespace TARCOGGassesParams;
63 : using namespace TARCOGParams;
64 :
65 : namespace TarcogShading {
66 :
67 : // Functions
68 :
69 : void shading(EnergyPlusData &state,
70 : Array1D<Real64> const &theta,
71 : Array1D<Real64> const &gap,
72 : Array1D<Real64> &hgas,
73 : Array1D<Real64> &hcgas,
74 : Array1D<Real64> &hrgas,
75 : Array2<Real64> const &frct,
76 : Array2_int const &iprop,
77 : Array1D<Real64> const &pressure,
78 : Array1D_int const &nmix,
79 : const Array1D<Real64> &xwght,
80 : Array2<Real64> const &xgcon,
81 : Array2<Real64> const &xgvis,
82 : Array2<Real64> const &xgcp,
83 : int const nlayer,
84 : Real64 const width,
85 : Real64 const height,
86 : Real64 const angle,
87 : Real64 const Tout,
88 : Real64 const Tin,
89 : Array1D<Real64> const &Atop,
90 : Array1D<Real64> const &Abot,
91 : Array1D<Real64> const &Al,
92 : Array1D<Real64> const &Ar,
93 : Array1D<Real64> const &Ah,
94 : Array1D<Real64> const &vvent,
95 : Array1D<Real64> const &tvent,
96 : Array1D<TARCOGLayerType> LayerType,
97 : Array1D<Real64> &Tgaps,
98 : Array1D<Real64> &qv,
99 : Array1D<Real64> &hcv,
100 : int &nperr,
101 : std::string &ErrorMessage,
102 : Array1D<Real64> &vfreevent);
103 :
104 : void forcedventilation(EnergyPlusData &state,
105 : const Array1D_int &iprop,
106 : const Array1D<Real64> &frct,
107 : Real64 const press,
108 : int const nmix,
109 : const Array1D<Real64> &xwght,
110 : Array2A<Real64> const xgcon,
111 : Array2A<Real64> const xgvis,
112 : Array2A<Real64> const xgcp,
113 : Real64 const s,
114 : Real64 const H,
115 : Real64 const hc,
116 : Real64 const forcedspeed,
117 : Real64 const Tinlet,
118 : Real64 &Toutlet,
119 : Real64 const Tav,
120 : Real64 &hcv,
121 : Real64 &qv,
122 : int &nperr,
123 : std::string &ErrorMessage);
124 :
125 : void shadingin(EnergyPlusData &state,
126 : const Array1D_int &iprop1,
127 : const Array1D<Real64> &frct1,
128 : Real64 const press1,
129 : int const nmix1,
130 : const Array1D_int &iprop2,
131 : const Array1D<Real64> &frct2,
132 : Real64 const press2,
133 : int const nmix2,
134 : const Array1D<Real64> &xwght,
135 : Array2A<Real64> const xgcon,
136 : Array2A<Real64> const xgvis,
137 : Array2A<Real64> const xgcp,
138 : Real64 &Atop,
139 : Real64 &Abot,
140 : Real64 const Al,
141 : Real64 const Ar,
142 : Real64 const Ah,
143 : Real64 const s1,
144 : Real64 const s2,
145 : Real64 const H,
146 : Real64 const L,
147 : Real64 const angle,
148 : Real64 const hc1,
149 : Real64 const hc2,
150 : Real64 &speed1,
151 : Real64 &speed2,
152 : Real64 &Tgap1,
153 : Real64 &Tgap2,
154 : Real64 const Tav1,
155 : Real64 const Tav2,
156 : Real64 &hcv1,
157 : Real64 &hcv2,
158 : Real64 &qv1,
159 : Real64 &qv2,
160 : int &nperr,
161 : std::string &ErrorMessage);
162 :
163 : void shadingedge(EnergyPlusData &state,
164 : const Array1D_int &iprop1,
165 : const Array1D<Real64> &frct1,
166 : Real64 const press1,
167 : int const nmix1,
168 : const Array1D_int &iprop2,
169 : const Array1D<Real64> &frct2,
170 : Real64 const press2,
171 : int const nmix2,
172 : const Array1D<Real64> &xwght,
173 : Array2A<Real64> const xgcon,
174 : Array2A<Real64> const xgvis,
175 : Array2A<Real64> const xgcp,
176 : Real64 &Atop,
177 : Real64 &Abot,
178 : Real64 const Al,
179 : Real64 const Ar,
180 : Real64 &Ah,
181 : Real64 const s,
182 : Real64 const H,
183 : Real64 const L,
184 : Real64 const angle,
185 : Real64 const forcedspeed,
186 : Real64 const hc,
187 : Real64 const Tenv,
188 : Real64 const Tav,
189 : Real64 &Tgap,
190 : Real64 &hcv,
191 : Real64 &qv,
192 : int &nperr,
193 : std::string &ErrorMessage,
194 : Real64 &speed);
195 :
196 : void updateEffectiveMultipliers(int const nlayer, // Number of layers
197 : Real64 const width, // IGU width [m]
198 : Real64 const height, // IGU height [m]
199 : const Array1D<Real64> &Atop, // Top openning area [m2]
200 : const Array1D<Real64> &Abot, // Bottom openning area [m2]
201 : const Array1D<Real64> &Al, // Left side openning area [m2]
202 : const Array1D<Real64> &Ar, // Right side openning area [m2]
203 : const Array1D<Real64> &Ah, // Front side openning area [m2]
204 : Array1D<Real64> &Atop_eff, // Output - Effective top openning area [m2]
205 : Array1D<Real64> &Abot_eff, // Output - Effective bottom openning area [m2]
206 : Array1D<Real64> &Al_eff, // Output - Effective left side openning area [m2]
207 : Array1D<Real64> &Ar_eff, // Output - Effective right side openning area [m2]
208 : Array1D<Real64> &Ah_eff, // Output - Effective front side openning area [m2]
209 : const Array1D<TARCOGLayerType> &LayerType, // Layer type
210 : const Array1D<Real64> &SlatAngle // Venetian layer slat angle [deg]
211 : );
212 :
213 : } // namespace TarcogShading
214 :
215 : struct TarcogShadingData : BaseGlobalStruct
216 : {
217 :
218 : Array1D<Real64> frct1 = Array1D<Real64>(TARCOGGassesParams::maxgas);
219 : Array1D<Real64> frct2 = Array1D<Real64>(TARCOGGassesParams::maxgas);
220 : Array1D_int iprop1 = Array1D_int(TARCOGGassesParams::maxgas);
221 : Array1D_int iprop2 = Array1D_int(TARCOGGassesParams::maxgas);
222 :
223 2126 : void init_constant_state([[maybe_unused]] EnergyPlusData &state) override
224 : {
225 2126 : }
226 :
227 1152 : void init_state([[maybe_unused]] EnergyPlusData &state) override
228 : {
229 1152 : }
230 :
231 2100 : void clear_state() override
232 : {
233 2100 : frct1 = Array1D<Real64>(TARCOGGassesParams::maxgas);
234 2100 : frct2 = Array1D<Real64>(TARCOGGassesParams::maxgas);
235 2100 : iprop1 = Array1D_int(TARCOGGassesParams::maxgas);
236 2100 : iprop2 = Array1D_int(TARCOGGassesParams::maxgas);
237 2100 : }
238 : };
239 :
240 : } // namespace EnergyPlus
241 :
242 : #endif
|
