Line data Source code
1 : // EnergyPlus, Copyright (c) 1996-2025, The Board of Trustees of the University of Illinois,
2 : // The Regents of the University of California, through Lawrence Berkeley National Laboratory
3 : // (subject to receipt of any required approvals from the U.S. Dept. of Energy), Oak Ridge
4 : // National Laboratory, managed by UT-Battelle, Alliance for Sustainable Energy, LLC, and other
5 : // contributors. All rights reserved.
6 : //
7 : // NOTICE: This Software was developed under funding from the U.S. Department of Energy and the
8 : // U.S. Government consequently retains certain rights. As such, the U.S. Government has been
9 : // granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable,
10 : // worldwide license in the Software to reproduce, distribute copies to the public, prepare
11 : // derivative works, and perform publicly and display publicly, and to permit others to do so.
12 : //
13 : // Redistribution and use in source and binary forms, with or without modification, are permitted
14 : // provided that the following conditions are met:
15 : //
16 : // (1) Redistributions of source code must retain the above copyright notice, this list of
17 : // conditions and the following disclaimer.
18 : //
19 : // (2) Redistributions in binary form must reproduce the above copyright notice, this list of
20 : // conditions and the following disclaimer in the documentation and/or other materials
21 : // provided with the distribution.
22 : //
23 : // (3) Neither the name of the University of California, Lawrence Berkeley National Laboratory,
24 : // the University of Illinois, U.S. Dept. of Energy nor the names of its contributors may be
25 : // used to endorse or promote products derived from this software without specific prior
26 : // written permission.
27 : //
28 : // (4) Use of EnergyPlus(TM) Name. If Licensee (i) distributes the software in stand-alone form
29 : // without changes from the version obtained under this License, or (ii) Licensee makes a
30 : // reference solely to the software portion of its product, Licensee must refer to the
31 : // software as "EnergyPlus version X" software, where "X" is the version number Licensee
32 : // obtained under this License and may not use a different name for the software. Except as
33 : // specifically required in this Section (4), Licensee shall not use in a company name, a
34 : // product name, in advertising, publicity, or other promotional activities any name, trade
35 : // name, trademark, logo, or other designation of "EnergyPlus", "E+", "e+" or confusingly
36 : // similar designation, without the U.S. Department of Energy's prior written consent.
37 : //
38 : // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
39 : // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
40 : // AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
41 : // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
42 : // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 : // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
44 : // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
45 : // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
46 : // POSSIBILITY OF SUCH DAMAGE.
47 :
48 : #ifndef FluidProperties_hh_INCLUDED
49 : #define FluidProperties_hh_INCLUDED
50 :
51 : // C++ Headers
52 : #include <cmath>
53 :
54 : // ObjexxFCL Headers
55 : #include <ObjexxFCL/Array1D.hh>
56 : #include <ObjexxFCL/Array2D.hh>
57 : #include <ObjexxFCL/Array2S.hh>
58 :
59 : // EnergyPlus Headers
60 : #include <EnergyPlus/Data/BaseData.hh>
61 : #include <EnergyPlus/DataGlobals.hh>
62 : #include <EnergyPlus/EnergyPlus.hh>
63 : #include <EnergyPlus/Psychrometrics.hh>
64 :
65 : namespace EnergyPlus {
66 :
67 : // Forward declarations
68 : struct EnergyPlusData;
69 :
70 : namespace Fluid {
71 :
72 : constexpr int GlycolNum_Water = 1;
73 : constexpr int RefrigNum_Steam = 1;
74 :
75 : #undef PERFORMANCE_OPT
76 :
77 : #ifdef EP_cache_GlycolSpecificHeat
78 : int constexpr t_sh_cache_size = 1024 * 1024;
79 : int constexpr t_sh_precision_bits = 24;
80 : std::uint64_t constexpr t_sh_cache_mask = (t_sh_cache_size - 1);
81 : #endif
82 :
83 : enum class RefrigError
84 : {
85 : Invalid = -1,
86 : SatTemp,
87 : SatPress,
88 : SatTempDensity,
89 : SatSupEnthalpy,
90 : SatSupEnthalpyTemp,
91 : SatSupEnthalpyPress,
92 : SatSupPress,
93 : SatSupPressTemp,
94 : SatSupPressEnthalpy,
95 : SatSupDensity,
96 : SatSupDensityTemp,
97 : SatSupDensityPress,
98 : Num
99 : };
100 :
101 : struct RefrigProps
102 : {
103 : // Members
104 : std::string Name; // Name of the refrigerant
105 : int Num = 0;
106 : bool used = false;
107 :
108 : std::string satTempArrayName; // Array of saturated temperature points, must be same for all properties
109 : std::string supTempArrayName; // Array of superheated temperature points, must be same for all properties
110 :
111 : int NumPsPoints = 0; // Number of saturation pressure
112 : Real64 PsLowTempValue = 0.0; // Low Temperature Value for Ps (>0.0)
113 : Real64 PsHighTempValue = 0.0; // High Temperature Value for Ps (max in tables)
114 : int PsLowTempIndex = 0; // Low Temperature Min Index for Ps (>0.0)
115 : int PsHighTempIndex = 0; // High Temperature Max Index for Ps (>0.0)
116 : Real64 PsLowPresValue = 0.0; // Low Pressure Value for Ps (>0.0)
117 : Real64 PsHighPresValue = 0.0; // High Pressure Value for Ps (max in tables)
118 : int PsLowPresIndex = 0; // Low Pressure Min Index for Ps (>0.0)
119 : int PsHighPresIndex = 0; // High Pressure Max Index for Ps (>0.0)
120 : Array1D<Real64> PsTemps; // Temperatures for saturation pressures
121 : Array1D<Real64> PsValues; // Saturation pressures at PsTemps
122 : #ifdef PERFORMANCE_OPT
123 : Array1D<Real64> PsTempRatios; // PsTempRatios(i) = (PsValues(i+1) - PsValues(i)) / (PsTemps(i+1) - PsTemps(i)). Speed optimization.
124 : #endif // PERFORMANCE_OPT
125 :
126 : int NumHPoints = 0; // Number of enthalpy points
127 : Real64 HfLowTempValue = 0.0; // Low Temperature Value for Hf (>0.0)
128 : Real64 HfHighTempValue = 0.0; // High Temperature Value for Hf (max in tables)
129 : int HfLowTempIndex = 0; // Low Temperature Min Index for Hf (>0.0)
130 : int HfHighTempIndex = 0; // High Temperature Max Index for Hf (>0.0)
131 : Real64 HfgLowTempValue = 0.0; // Low Temperature Value for Hfg (>0.0)
132 : Real64 HfgHighTempValue = 0.0; // High Temperature Value for Hfg (max in tables)
133 : int HfgLowTempIndex = 0; // Low Temperature Min Index for Hfg (>0.0)
134 : int HfgHighTempIndex = 0; // High Temperature Max Index for Hfg (>0.0)
135 : Array1D<Real64> HTemps; // Temperatures for enthalpy points
136 : Array1D<Real64> HfValues; // Enthalpy of saturated fluid at HTemps
137 : Array1D<Real64> HfgValues; // Enthalpy of saturated fluid/gas at HTemps
138 : #ifdef PERFORMANCE_OPT
139 : Array1D<Real64> HfTempRatios;
140 : Array1D<Real64> HfgTempRatios;
141 : #endif // PERFORMANCE_OPT
142 :
143 : int NumCpPoints = 0; // Number of specific heat of fluid points
144 : Real64 CpfLowTempValue = 0.0; // Low Temperature Value for Cpf (>0.0)
145 : Real64 CpfHighTempValue = 0.0; // High Temperature Value for Cpf (max in tables)
146 : int CpfLowTempIndex = 0; // Low Temperature Min Index for Cpf (>0.0)
147 : int CpfHighTempIndex = 0; // High Temperature Max Index for Cpf (>0.0)
148 : Real64 CpfgLowTempValue = 0.0; // Low Temperature Value for Cpfg (>0.0)
149 : Real64 CpfgHighTempValue = 0.0; // High Temperature Value for Cpfg (max in tables)
150 : int CpfgLowTempIndex = 0; // Low Temperature Min Index for Cpfg (>0.0)
151 : int CpfgHighTempIndex = 0; // High Temperature Max Index for Cpfg (>0.0)
152 : Array1D<Real64> CpTemps; // Temperatures for specific heat points
153 : Array1D<Real64> CpfValues; // Specific heat of saturated fluid at CpTemps
154 : Array1D<Real64> CpfgValues; // Specific heat of saturated fluid/gas at CpTemps
155 : #ifdef PERFORMANCE_OPT
156 : Array1D<Real64> CpfTempRatios;
157 : Array1D<Real64> CpfgTempRatios;
158 : #endif // PERFORMANCE_OPT
159 :
160 : int NumRhoPoints = 0; // Number of density of fluid points
161 : Real64 RhofLowTempValue = 0.0; // Low Temperature Value for Rhof (>0.0)
162 : Real64 RhofHighTempValue = 0.0; // High Temperature Value for Rhof (max in tables)
163 : int RhofLowTempIndex = 0; // Low Temperature Min Index for Rhof (>0.0)
164 : int RhofHighTempIndex = 0; // High Temperature Max Index for Rhof (>0.0)
165 : Real64 RhofgLowTempValue = 0.0; // Low Temperature Value for Rhofg (>0.0)
166 : Real64 RhofgHighTempValue = 0.0; // High Temperature Value for Rhofg (max in tables)
167 : int RhofgLowTempIndex = 0; // Low Temperature Min Index for Rhofg (>0.0)
168 : int RhofgHighTempIndex = 0; // High Temperature Max Index for Rhofg (>0.0)
169 : Array1D<Real64> RhoTemps; // Temperatures for density of fluid points
170 : Array1D<Real64> RhofValues; // Density of saturated fluid at RhoTemps
171 : Array1D<Real64> RhofgValues; // Density of saturated fluid/gas at RhoTemps
172 : #ifdef PERFORMANCE_OPT
173 : Array1D<Real64> RhofTempRatios;
174 : Array1D<Real64> RhofgTempRatios;
175 : #endif // PERFORMANCE_OPT
176 :
177 : int NumSupTempPoints = 0; // Number of temperature points for superheated enthalpy
178 : int NumSupPressPoints = 0; // Number of pressure points for superheated enthalpy
179 : Array1D<Real64> SupTemps; // Temperatures for superheated gas
180 : Array1D<Real64> SupPress; // Pressures for superheated gas
181 : Array2D<Real64> HshValues; // Enthalpy of superheated gas at HshTemps, HshPress
182 : Array2D<Real64> RhoshValues; // Density of superheated gas at HshTemps, HshPress
183 :
184 : std::array<ErrorCountIndex, (int)RefrigError::Num> errors;
185 :
186 : Real64 getQuality(EnergyPlusData &state,
187 : Real64 Temperature, // actual temperature given as input
188 : Real64 Enthalpy, // actual enthalpy given as input
189 : std::string_view CalledFrom); // routine this function was called from (error messages)
190 :
191 : Real64 getSatPressure(EnergyPlusData &state,
192 : Real64 Temperature, // actual temperature given as input
193 : std::string_view CalledFrom); // routine this function was called from (error messages)
194 :
195 : Real64 getSatTemperature(EnergyPlusData &state,
196 : Real64 Pressure, // actual temperature given as input
197 : std::string_view CalledFrom); // routine this function was called from (error messages)
198 :
199 : Real64 getSatEnthalpy(EnergyPlusData &state,
200 : Real64 Temperature, // actual temperature given as input
201 : Real64 Quality, // actual quality given as input
202 : std::string_view CalledFrom); // routine this function was called from (error messages)
203 :
204 : Real64 getSatDensity(EnergyPlusData &state,
205 : Real64 Temperature, // actual temperature given as input
206 : Real64 Quality, // actual quality given as input
207 : std::string_view CalledFrom); // routine this function was called from (error messages)
208 :
209 : Real64 getSatSpecificHeat(EnergyPlusData &state,
210 : Real64 Temperature, // actual temperature given as input
211 : Real64 Quality, // actual quality given as input
212 : std::string_view CalledFrom); // routine this function was called from (error messages)
213 :
214 : Real64 getSupHeatEnthalpy(EnergyPlusData &state,
215 : Real64 Temperature, // actual temperature given as input
216 : Real64 Pressure, // actual pressure given as input
217 : std::string_view CalledFrom); // routine this function was called from (error messages)
218 :
219 : Real64 getSupHeatPressure(EnergyPlusData &state,
220 : Real64 Temperature, // actual temperature given as input
221 : Real64 Enthalpy, // actual enthalpy given as input
222 : std::string_view CalledFrom); // routine this function was called from (error messages)
223 :
224 : Real64 getSupHeatTemp(EnergyPlusData &state,
225 : Real64 Pressure, // actual pressure given as input
226 : Real64 Enthalpy, // actual enthalpy given as input
227 : Real64 TempLow, // lower bound of temperature in the iteration
228 : Real64 TempUp, // upper bound of temperature in the iteration
229 : std::string_view CalledFrom); // routine this function was called from (error messages)
230 :
231 : Real64 getSupHeatDensity(EnergyPlusData &state,
232 : Real64 Temperature, // actual temperature given as input
233 : Real64 Pressure, // actual pressure given as input
234 : std::string_view CalledFrom); // routine this function was called from (error messages)
235 :
236 : void setTempLimits(EnergyPlusData &state, bool &ErrorsFound);
237 : };
238 :
239 : enum class GlycolError
240 : {
241 : Invalid = -1,
242 : SpecHeatLow,
243 : SpecHeatHigh,
244 : DensityLow,
245 : DensityHigh,
246 : ConductivityLow,
247 : ConductivityHigh,
248 : ViscosityLow,
249 : ViscosityHigh,
250 : Num
251 : };
252 :
253 : struct GlycolRawProps
254 : {
255 : // Members
256 : std::string Name; // Name of the glycol
257 : int Num = 0;
258 :
259 : std::string CpTempArrayName;
260 : bool CpDataPresent = false; // Flag set when specific heat data is available
261 : int NumCpTempPoints = 0; // Number of temperature points for specific heat
262 : int NumCpConcPoints = 0; // Number of concentration points for specific heat
263 : Array1D<Real64> CpTemps; // Temperatures for specific heat of glycol
264 : Array1D<Real64> CpConcs; // Concentration for specific heat of glycol
265 : Array2D<Real64> CpValues; // Specific heat data values
266 :
267 : std::string RhoTempArrayName;
268 : bool RhoDataPresent = false; // Flag set when density data is available
269 : int NumRhoTempPoints = 0; // Number of temperature points for density
270 : int NumRhoConcPoints = 0; // Number of concentration points for density
271 : Array1D<Real64> RhoTemps; // Temperatures for density of glycol
272 : Array1D<Real64> RhoConcs; // Concentration for density of glycol
273 : Array2D<Real64> RhoValues; // Density data values
274 :
275 : std::string CondTempArrayName;
276 : bool CondDataPresent = false; // Flag set when conductivity data is available
277 : int NumCondTempPoints = 0; // Number of temperature points for conductivity
278 : int NumCondConcPoints = 0; // Number of concentration points for conductivity
279 : Array1D<Real64> CondTemps; // Temperatures for conductivity of glycol
280 : Array1D<Real64> CondConcs; // Concentration for conductivity of glycol
281 : Array2D<Real64> CondValues; // conductivity values
282 :
283 : std::string ViscTempArrayName;
284 : bool ViscDataPresent = false; // Flag set when viscosity data is available
285 : int NumViscTempPoints = 0; // Number of temperature points for viscosity
286 : int NumViscConcPoints = 0; // Number of concentration points for viscosity
287 : Array1D<Real64> ViscTemps; // Temperatures for viscosity of glycol
288 : Array1D<Real64> ViscConcs; // Concentration for viscosity of glycol
289 : Array2D<Real64> ViscValues; // viscosity values
290 : };
291 :
292 : struct GlycolProps
293 : {
294 : // Members
295 : std::string Name; // Name of the glycol mixture (used by other parts of code)
296 : int Num = 0;
297 : bool used = false;
298 :
299 : std::string GlycolName; // Name of non-water fluid that is part of this mixture
300 : // (refers to ethylene glycol, propylene glycol, or user fluid)
301 : int BaseGlycolIndex = 0; // Index in user defined glycol data (>0 = index in raw data,
302 : // -1=propylene glycol, -2=ethylene glycol)
303 : Real64 Concentration = 0.0; // Concentration (if applicable)
304 :
305 : bool CpDataPresent = false; // Flag set when specific heat data is available
306 : Real64 CpLowTempValue = 0.0; // Low Temperature Value for Cp (>0.0)
307 : Real64 CpHighTempValue = 0.0; // High Temperature Value for Cp (max in tables)
308 : int CpLowTempIndex = 0; // Low Temperature Min Index for Cp (>0.0)
309 : int CpHighTempIndex = 0; // High Temperature Max Index for Cp (>0.0)
310 : int NumCpTempPoints = 0; // Number of temperature points for specific heat
311 : Array1D<Real64> CpTemps; // Temperatures for specific heat of glycol
312 : Array1D<Real64> CpValues; // Specific heat data values (J/kg-K)
313 : #ifdef PERFORMANCE_OPT
314 : int LoCpTempIdxLast = 1;
315 : Array1D<Real64> CpTempRatios; // Speed optimization
316 : #endif // PERFORMANCE_OPT
317 :
318 : bool RhoDataPresent = false; // Flag set when density data is available
319 : int NumRhoTempPoints = 0.0; // Number of temperature points for density
320 : Real64 RhoLowTempValue = 0.0; // Low Temperature Value for Rho (>0.0)
321 : Real64 RhoHighTempValue = 0.0; // High Temperature Value for Rho (max in tables)
322 : int RhoLowTempIndex = 0; // Low Temperature Min Index for Rho (>0.0)
323 : int RhoHighTempIndex = 0; // High Temperature Max Index for Rho (>0.0)
324 : Array1D<Real64> RhoTemps; // Temperatures for density of glycol
325 : Array1D<Real64> RhoValues; // Density data values (kg/m3)
326 : #ifdef PERFORMANCE_OPT
327 : int LoRhoTempIdxLast = 1;
328 : Array1D<Real64> RhoTempRatios; // Speed optimization
329 : #endif // PERFORMANCE_OPT
330 :
331 : bool CondDataPresent = false; // Flag set when conductivity data is available
332 : int NumCondTempPoints = 0; // Number of temperature points for conductivity
333 : Real64 CondLowTempValue = 0.0; // Low Temperature Value for Cond (>0.0)
334 : Real64 CondHighTempValue = 0.0; // High Temperature Value for Cond (max in tables)
335 : int CondLowTempIndex = 0; // Low Temperature Min Index for Cond (>0.0)
336 : int CondHighTempIndex = 0; // High Temperature Max Index for Cond (>0.0)
337 : Array1D<Real64> CondTemps; // Temperatures for conductivity of glycol
338 : Array1D<Real64> CondValues; // conductivity values (W/m-K)
339 : #ifdef PERFORMANCE_OPT
340 : int LoCondTempIdxLast = 1;
341 : Array1D<Real64> CondTempRatios; // Speed optimization
342 : #endif // PERFORMANCE_OPT
343 :
344 : bool ViscDataPresent = false; // Flag set when viscosity data is available
345 : int NumViscTempPoints = 0; // Number of temperature points for viscosity
346 : Real64 ViscLowTempValue = 0.0; // Low Temperature Value for Visc (>0.0)
347 : Real64 ViscHighTempValue = 0.0; // High Temperature Value for Visc (max in tables)
348 : int ViscLowTempIndex = 0; // Low Temperature Min Index for Visc (>0.0)
349 : int ViscHighTempIndex = 0; // High Temperature Max Index for Visc (>0.0)
350 : Array1D<Real64> ViscTemps; // Temperatures for viscosity of glycol
351 : Array1D<Real64> ViscValues; // viscosity values (mPa-s)
352 : #ifdef PERFORMANCE_OPT
353 : int LoViscTempIdxLast = 1;
354 : Array1D<Real64> ViscTempRatios;
355 : #endif // PERFORMANCE_OPT
356 :
357 : std::array<ErrorCountIndex, (int)GlycolError::Num> errors;
358 :
359 : #ifdef EP_cache_GlycolSpecificHeat
360 : Real64 getSpecificHeat_raw(EnergyPlusData &state,
361 : Real64 Temperature, // actual temperature given as input
362 : std::string_view CalledFrom // routine this function was called from (error messages)
363 : );
364 : #endif
365 : Real64 getSpecificHeat(EnergyPlusData &state,
366 : Real64 Temperature, // actual temperature given as input
367 : std::string_view CalledFrom); // routine this function was called from (error messages)
368 :
369 : Real64 getDensity(EnergyPlusData &state,
370 : Real64 Temperature, // actual temperature given as input
371 : std::string_view CalledFrom); // routine this function was called from (error messages)
372 :
373 : Real64 getConductivity(EnergyPlusData &state,
374 : Real64 Temperature, // actual temperature given as input
375 : std::string_view CalledFrom); // routine this function was called from (error messages)
376 :
377 : Real64 getViscosity(EnergyPlusData &state,
378 : Real64 Temperature, // actual temperature given as input
379 : std::string_view CalledFrom); // routine this function was called from (error messages)
380 :
381 : void setTempLimits(EnergyPlusData &state, bool &ErrorsFound);
382 :
383 : void getDensityTemperatureLimits(EnergyPlusData &state, Real64 &MinTempLimit, Real64 &MaxTempLimit);
384 :
385 : void getSpecificHeatTemperatureLimits(EnergyPlusData &state, Real64 &MinTempLimit, Real64 &MaxTempLimit);
386 : };
387 :
388 : struct cached_tsh
389 : {
390 : // Members
391 : std::uint64_t iT = 1000;
392 : Real64 sh = 0.0;
393 : };
394 :
395 : void GetFluidPropertiesData(EnergyPlusData &state);
396 :
397 : void InitConstantFluidPropertiesData(EnergyPlusData &state);
398 :
399 : template <size_t NumOfTemps, size_t NumOfConcs>
400 : void InterpDefValuesForGlycolConc(
401 : EnergyPlusData &state,
402 : const std::array<Real64, NumOfConcs> &RawConcData, // concentrations for raw data
403 : const std::array<std::array<Real64, NumOfTemps>, NumOfConcs> &RawPropData, // raw property data (concentration, temperature)
404 : Real64 Concentration, // concentration of actual fluid mix
405 : Array1D<Real64> &InterpData // interpolated output data at proper concentration
406 : );
407 :
408 : void InterpValuesForGlycolConc(EnergyPlusData &state,
409 : int NumOfConcs, // number of concentrations (dimension of raw data)
410 : int NumOfTemps, // number of temperatures (dimension of raw data)
411 : const Array1D<Real64> &RawConcData, // concentrations for raw data
412 : Array2S<Real64> RawPropData, // raw property data (temperature,concentration)
413 : Real64 Concentration, // concentration of actual fluid mix
414 : Array1D<Real64> &InterpData // interpolated output data at proper concentration
415 : );
416 :
417 : void ReportAndTestGlycols(EnergyPlusData &state);
418 :
419 : void ReportAndTestRefrigerants(EnergyPlusData &state);
420 : #ifdef GET_OUT
421 : Real64 GetQualityRefrig(EnergyPlusData &state,
422 : std::string const &Refrigerant, // carries in substance name
423 : Real64 Temperature, // actual temperature given as input
424 : Real64 Enthalpy, // actual enthalpy given as input
425 : int &RefrigIndex, // Index to Refrigerant Properties
426 : std::string_view CalledFrom // routine this function was called from (error messages)
427 : );
428 :
429 : Real64 GetSatPressureRefrig(EnergyPlusData &state,
430 : std::string_view Refrigerant, // carries in substance name
431 : Real64 Temperature, // actual temperature given as input
432 : int &RefrigIndex, // Index to Refrigerant Properties
433 : std::string_view CalledFrom // routine this function was called from (error messages)
434 : );
435 :
436 : Real64 GetSatTemperatureRefrig(EnergyPlusData &state,
437 : std::string_view Refrigerant, // carries in substance name
438 : Real64 Pressure, // actual temperature given as input
439 : int &RefrigIndex, // Index to Refrigerant Properties
440 : std::string_view CalledFrom // routine this function was called from (error messages)
441 : );
442 :
443 : Real64 GetSatEnthalpyRefrig(EnergyPlusData &state,
444 : std::string_view Refrigerant, // carries in substance name
445 : Real64 Temperature, // actual temperature given as input
446 : Real64 Quality, // actual quality given as input
447 : int &RefrigIndex, // Index to Refrigerant Properties
448 : std::string_view CalledFrom // routine this function was called from (error messages)
449 : );
450 :
451 : Real64 GetSatDensityRefrig(EnergyPlusData &state,
452 : std::string_view Refrigerant, // carries in substance name
453 : Real64 Temperature, // actual temperature given as input
454 : Real64 Quality, // actual quality given as input
455 : int &RefrigIndex, // Index to Refrigerant Properties
456 : std::string_view CalledFrom // routine this function was called from (error messages)
457 : );
458 :
459 : Real64 GetSatSpecificHeatRefrig(EnergyPlusData &state,
460 : std::string_view Refrigerant, // carries in substance name
461 : Real64 Temperature, // actual temperature given as input
462 : Real64 Quality, // actual quality given as input
463 : int &RefrigIndex, // Index to Refrigerant Properties
464 : std::string_view CalledFrom // routine this function was called from (error messages)
465 : );
466 :
467 : Real64 GetSupHeatEnthalpyRefrig(EnergyPlusData &state,
468 : std::string_view Refrigerant, // carries in substance name
469 : Real64 Temperature, // actual temperature given as input
470 : Real64 Pressure, // actual pressure given as input
471 : int &RefrigIndex, // Index to Refrigerant Properties
472 : std::string_view CalledFrom // routine this function was called from (error messages)
473 : );
474 :
475 : Real64 GetSupHeatPressureRefrig(EnergyPlusData &state,
476 : std::string_view Refrigerant, // carries in substance name
477 : Real64 Temperature, // actual temperature given as input
478 : Real64 Enthalpy, // actual enthalpy given as input
479 : int &RefrigIndex, // Index to Refrigerant Properties
480 : std::string_view CalledFrom // routine this function was called from (error messages)
481 : );
482 :
483 : Real64 GetSupHeatTempRefrig(EnergyPlusData &state,
484 : std::string_view Refrigerant, // carries in substance name
485 : Real64 Pressure, // actual pressure given as input
486 : Real64 Enthalpy, // actual enthalpy given as input
487 : Real64 TempLow, // lower bound of temperature in the iteration
488 : Real64 TempUp, // upper bound of temperature in the iteration
489 : int &RefrigIndex, // Index to Refrigerant Properties
490 : std::string_view CalledFrom // routine this function was called from (error messages)
491 : );
492 :
493 : Real64 GetSupHeatDensityRefrig(EnergyPlusData &state,
494 : std::string_view Refrigerant, // carries in substance name
495 : Real64 Temperature, // actual temperature given as input
496 : Real64 Pressure, // actual pressure given as input
497 : int &RefrigIndex, // Index to Refrigerant Properties
498 : std::string_view CalledFrom // routine this function was called from (error messages)
499 : );
500 :
501 : Real64 GetSpecificHeatGlycol(EnergyPlusData &state,
502 : std::string_view Glycol, // carries in substance name
503 : Real64 Temperature, // actual temperature given as input
504 : int &GlycolIndex, // Index to Glycol Properties
505 : std::string_view CalledFrom // routine this function was called from (error messages)
506 : );
507 :
508 : Real64 GetDensityGlycol(EnergyPlusData &state,
509 : std::string_view Glycol, // carries in substance name
510 : Real64 Temperature, // actual temperature given as input
511 : int &GlycolIndex, // Index to Glycol Properties
512 : std::string_view CalledFrom // routine this function was called from (error messages)
513 : );
514 :
515 : Real64 GetConductivityGlycol(EnergyPlusData &state,
516 : std::string_view Glycol, // carries in substance name
517 : Real64 Temperature, // actual temperature given as input
518 : int &GlycolIndex, // Index to Glycol Properties
519 : std::string_view CalledFrom // routine this function was called from (error messages)
520 : );
521 :
522 : Real64 GetViscosityGlycol(EnergyPlusData &state,
523 : std::string_view Glycol, // carries in substance name
524 : Real64 Temperature, // actual temperature given as input
525 : int &GlycolIndex, // Index to Glycol Properties
526 : std::string_view CalledFrom // routine this function was called from (error messages)
527 : );
528 : #endif // GET_OUT
529 :
530 202641 : inline Real64 GetInterpValue(Real64 const Tact, // actual temperature at which we want the property of interest
531 : Real64 const Tlo, // temperature below Tact for which we have property data
532 : Real64 const Thi, // temperature above Tact for which we have property data
533 : Real64 const Xlo, // value of property at Tlo
534 : Real64 const Xhi // value of property at Thi
535 : )
536 : {
537 202641 : return Xhi - (((Thi - Tact) / (Thi - Tlo)) * (Xhi - Xlo));
538 : }
539 :
540 : int GetRefrigNum(EnergyPlusData &state, std::string_view name);
541 : RefrigProps *GetRefrig(EnergyPlusData &state, std::string_view name);
542 : RefrigProps *GetSteam(EnergyPlusData &state);
543 :
544 : int GetGlycolRawNum(EnergyPlusData &state, std::string_view name);
545 : GlycolRawProps *GetGlycolRaw(EnergyPlusData &state, std::string_view name);
546 :
547 : int GetGlycolNum(EnergyPlusData &state, std::string_view name);
548 : GlycolProps *GetGlycol(EnergyPlusData &state, std::string_view name);
549 : GlycolProps *GetWater(EnergyPlusData &state);
550 :
551 : std::string GetGlycolNameByIndex(EnergyPlusData &state, int Idx); // carries in substance index
552 :
553 : int FindArrayIndex(Real64 Value, // Value to be placed/found within the array of values
554 : Array1D<Real64> const &Array, // Array of values in ascending order
555 : int LowBound, // Valid values lower bound (set by calling program)
556 : int UpperBound // Valid values upper bound (set by calling program)
557 : );
558 :
559 : int FindArrayIndex(Real64 Value, // Value to be placed/found within the array of values
560 : Array1D<Real64> const &Array // Array of values in ascending order
561 : );
562 :
563 : Real64 GetInterpolatedSatProp(EnergyPlusData &state,
564 : Real64 Temperature, // Saturation Temp.
565 : Array1D<Real64> const &PropTemps, // Array of temperature at which props are available
566 : Array1D<Real64> const &LiqProp, // Array of saturated liquid properties
567 : Array1D<Real64> const &VapProp, // Array of saturatedvapour properties
568 : Real64 Quality, // Quality
569 : std::string_view CalledFrom, // routine this function was called from (error messages)
570 : int LowBound, // Valid values lower bound (set by calling program)
571 : int UpperBound // Valid values upper bound (set by calling program)
572 : );
573 :
574 : void ReportOrphanFluids(EnergyPlusData &state);
575 : } // namespace Fluid
576 :
577 : struct FluidData : BaseGlobalStruct
578 : {
579 : bool DebugReportGlycols = false;
580 : bool DebugReportRefrigerants = false;
581 : int GlycolErrorLimitTest = 1; // how many times error is printed with details before recurring called
582 : int RefrigErrorLimitTest = 1; // how many times error is printed with details before recurring called
583 :
584 : Array1D<Fluid::RefrigProps *> refrigs;
585 : Array1D<Fluid::GlycolRawProps *> glycolsRaw;
586 : Array1D<Fluid::GlycolProps *> glycols;
587 :
588 : std::array<int, (int)Fluid::GlycolError::Num> glycolErrorLimits = {0, 0, 0, 0, 0, 0, 0, 0};
589 :
590 : int SatErrCountGetSupHeatEnthalpyRefrig = 0;
591 : int SatErrCountGetSupHeatDensityRefrig = 0;
592 : int TempLoRangeErrIndexGetQualityRefrig = 0;
593 : int TempHiRangeErrIndexGetQualityRefrig = 0;
594 : int TempRangeErrCountGetInterpolatedSatProp = 0;
595 : int TempRangeErrIndexGetInterpolatedSatProp = 0;
596 :
597 : #ifdef EP_cache_GlycolSpecificHeat
598 : std::array<Fluid::cached_tsh, Fluid::t_sh_cache_size> cached_t_sh;
599 : #endif
600 :
601 2128 : void init_constant_state([[maybe_unused]] EnergyPlusData &state) override
602 : {
603 2128 : Fluid::InitConstantFluidPropertiesData(state);
604 2128 : }
605 :
606 1229 : void init_state(EnergyPlusData &state) override
607 : {
608 1229 : Fluid::GetFluidPropertiesData(state);
609 1229 : }
610 :
611 2102 : void clear_state() override
612 : {
613 :
614 4213 : for (int i = 1; i <= refrigs.isize(); ++i) {
615 2111 : refrigs(i)->HshValues.deallocate();
616 2111 : refrigs(i)->RhoshValues.deallocate();
617 2111 : delete refrigs(i);
618 : }
619 6532 : for (int i = 1; i <= glycolsRaw.isize(); ++i) {
620 4430 : delete glycolsRaw(i);
621 : }
622 4207 : for (int i = 1; i <= glycols.isize(); ++i) {
623 2105 : delete glycols(i);
624 : }
625 :
626 2102 : new (this) FluidData();
627 2102 : }
628 : };
629 :
630 : } // namespace EnergyPlus
631 :
632 : #endif
|
